Hallicrafters FM-52 Service Manual (PDF)

The service manual for Hallicrafters models FM-46, 48, 52, and 54 provides detailed instructions for setup, operation, and troubleshooting, including alignment procedures for both AM and FM frequencies and dial cord restringing. It also includes technical specifications, component locations, and a service repair parts list to assist in maintenance and repair tasks.

  • Brand: Hallicrafters
  • Model: FM-52
  • Type: service manual
  • File size: 757.6 KB

Manual Overview

The Hallicrafters service manual for models FM-46, 48, 52, and 54 provides detailed instructions for troubleshooting, calibration, and adjustments. The FM-46 and 52 models have plastic cabinets, while the FM-48 and 54 have wood cabinets, with the FM-52 and 54 featuring additional clock circuitry. The manual includes a comprehensive alignment procedure for both AM and FM bands, requiring specific test equipment such as RF signal generators and oscilloscopes. AM alignment involves adjusting components like T6, T7, T8, and L6, while FM alignment focuses on components such as T1, T2, T3, and L4. The manual also provides guidance on dial cord restringing, emphasizing careful chassis removal to avoid damaging connections. An errata sheet corrects component designations and part numbers, ensuring accurate repairs. The schematic diagrams and parts list offer detailed component locations and specifications, essential for board-level troubleshooting and repairs. The manual emphasizes using non-metallic tools for adjustments to prevent damage to sensitive components.

Quick Issues Covered

  • Diagnose power-up failures in FM-46, 48, 52, 54 models.
  • Error codes for AM/FM alignment issues.
  • Calibration adjustments for optimal signal reception.

Overview

The product covered in the manual includes the Hallicrafters models FM-46, 48, 52, and 54. The FM-46 and 52 models have plastic cabinets, while the FM-48 and 54 have wood cabinets. The FM-52 and 54 models include an electrical clock and associated components, unlike the FM-46 and 48. The manual provides technical specifications, alignment procedures, and service repair parts information relevant to all four models.

Specifications

  • Selectivity (AM) 6~10 KHz at 6 db
  • LF. Bandwidth (FM) 150-250 KHz at 6 db
  • Audio Output 1000 Milliwatts (1.0 watt)
  • Hum and Noise Under 8 uw
  • AFC Hold Range Average +300 KHz
  • Speaker 4" x 6" PM, 8 ohm
  • Transistors Nine, plus eleven diodes
  • LF. Frequencies 455 KHz and 10.7 MHz
  • Sensitivity (AM) Nominal 150/uv/m
  • Sensitivity (FM) Nominal 5 uv
  • Antennas Ferrite rod for AM
  • Antennas Line cord for FM
  • Antennas Provisions for external FM antenna
  • Tuning Ranges (AM) 540-1600 KHz
  • Tuning Ranges (FM) 88-108 MHz
  • Image Rejection (AM) Over 25 db
  • Image Rejection (FM) Over 37 db
  • Power Source 105-125 V.A.C., 60 cycle
  • Dimensions (HWD) 5-1/2 x 13-1/8 x 3-1/2 inches

Installation / Setup

The source does not provide specific information on installation or setup highlights such as wiring, clearances, calibration, or prerequisites.

Download PDF (757.6 KB)

Leave a Comment