BK Precision 889B Instruction Manual (2) (PDF)

The manual for the Model 889B Bench LCR/ESR Meter covers the setup, operation, and troubleshooting of the device, including instructions for making measurements, selecting test frequencies and voltages, and utilizing the dual display feature. It also provides guidance on using the meter's various functions such as DC/AC voltage/current measurements, diode/audible continuity checks, and LCR measurements with a basic accuracy of 0.1%.

  • Brand: BK Precision
  • Model: 889B
  • Type: manual
  • File size: 659.4 KB

Manual Overview

The B&K Precision 889B Synthesized In-Circuit LCR/ESR Meter is designed for precise measurement of inductors, capacitors, and resistors, with a basic accuracy of 0.1%. It includes DC/AC voltage and current measurement capabilities, as well as diode and audible continuity checks. The meter supports both auto and manual ranging, with selectable test frequencies ranging from 100 Hz to 200 KHz and test voltages from 50mVrms to 1 VDC. The dual display allows for simultaneous measurements, enhancing its utility in various applications such as electronic engineering labs and service shops.

For troubleshooting, the manual provides a flow for error codes and diagnostics, emphasizing the importance of calibration and adjustments. Open and short calibration is crucial for accurate measurements. The manual also offers board-level guidance, detailing the use of the USB interface for communication and the dual liquid crystal display for parameter visualization. The 889B can measure both DC and AC impedances, making it versatile for analyzing electronic components. Its ability to perform functions of a general-purpose digital multimeter further extends its application scope.

Quick Issues Covered

  • Diagnose open/short calibration issues for accurate measurements.
  • Resolve power-up failures with test lead connections and settings.
  • Use schematics for circuit tracing and component testing.

Overview

The B&K Precision Corp. 889B Synthesized In-Circuit LCR/ESR Meter is a high accuracy test instrument designed for measuring inductors, capacitors, and resistors with a basic accuracy of 0.1%. It also includes functions for DC/AC Voltage/Current measurements and Diode/Audible Continuity checks, making it a versatile tool for engineers, students, and service technicians. The 889B features auto and manual ranging, selectable test frequencies and voltages, and a dual display for simultaneous measurements. It can perform functions typical of more expensive LCR bridges and general-purpose Digital Multi-Meters. The meter is applicable in various settings, including labs, production facilities, service shops, and schools, for tasks such as checking ESR values, sorting components, and measuring capacitance, inductance, or resistance. Key features include True RMS voltage and current measurements, diode/continuity checks, and comprehensive LCR measurement capabilities.

Specifications

  • Voltage Measurements:
  • AC: True RMS, up to 600Vrms @ 40 ~ 1K Hz
  • DC: up to 600V
  • Input Impedance: 1M-Ohm
  • Current Measurements:
  • AC: True RMS, up to 2Arms @ 40 ~ 1K Hz
  • DC: up to 2A
  • Current Shunt: 0.1 Ohm @ > 20mA; 10 Ohm @ < 20mA
  • Diode/Audible Continuity Checks:
  • Open Circuit Voltage: 5Vdc
  • Short Circuit Current: 2.5mA
  • Beep On: <25Ω
  • Beep Off: > 50Ω
  • LCR Measurements:
  • Test conditions
  • Frequency: 100Hz / 120Hz / 1KHz / 10KHz / 100KHz / 200KHz
  • Level: 1Vrms / 0.25Vrms / 50mVrms / 1VDC (DCR only)
  • Measurement Parameters: Z, Ls, Lp, Cs, Cp, DCR, ESR, D, Q and θ
  • Basic Accuracy: 0.1%
  • Dual Liquid Crystal Display
  • Auto Range or Range Hold
  • USB Interface Communication
  • Open/Short Calibration
  • Primary Parameters Display:
  • Z: AC Impedance
  • DCR: DC Resistance
  • Ls: Serial Inductance
  • Lp: Parallel Inductance
  • Cs: Serial Capacitance
  • Cp: Parallel Capacitance
  • Second Parameter Display:
  • θ: Phase Angle
  • ESR: Equivalence Serial Resistance
  • D: Dissipation Factor
  • Q: Quality Factor
  • Combinations of Display:
  • Serial Mode: Z-θ, Cs-D, Cs-Q, Cs-ESR, Ls-D, Ls-Q, Ls-ESR
  • Parallel Mode: Cp-D, Cp-Q, Lp-D, Lp-Q

Operation

The operation of the Model 889B Bench LCR/ESR Meter involves several steps and modes. The device is designed for measuring inductors, capacitors, and resistors with high accuracy. It defaults to auto-ranging but can be set to manual ranging using the Range Hold key. The LCR measurement mode allows selection of test frequencies (100 Hz, 120 Hz, 1 KHz, 10 KHz, 100 KHz, or 200 KHz) and test voltages (50mVrms, 0.25 Vrms, 1 Vrms, or 1 VDC for DCR only). The dual display feature enables simultaneous measurements. In DC/AC voltage/current measurement mode or Diode/Audible Continuity Check mode, only the secondary display is used for results. The meter can perform functions of most bench-type LCR bridges and general-purpose Digital Multi-Meters, making it suitable for various applications in labs, production facilities, service shops, and schools.

Download PDF (659.4 KB)

Leave a Comment