BK Precision 2522B Instruction Manual (PDF)

The BK Precision Model 2522B manual covers setup, operation, and troubleshooting for a 20 MHz digital storage/analog oscilloscope, including instructions on safety precautions, controls, and operating tips. It also provides guidance on maintenance, calibration checks, and service information to ensure proper functionality and safety during use.

  • Brand: BK Precision
  • Model: 2522B
  • Type: manual
  • File size: 552.0 KB

Manual Overview

The BK Precision Model 2522B is a 20 MHz digital storage/analog oscilloscope designed for technicians and engineers, featuring dual trace capabilities and a full analog mode. The manual emphasizes safety precautions to mitigate risks of electrical shock, especially when working with high voltage. It advises using isolation transformers for “hot chassis” equipment and recommends never working alone. Troubleshooting guidance includes a detailed calibration check and periodic adjustments to ensure accurate measurements. The oscilloscope supports various digital storage modes, including refresh, roll, and single sweep, with a high sampling rate of up to 10 Ms/s for capturing one-time events. Error codes and diagnostics are not explicitly detailed, but the manual provides board-level guidance through its maintenance section, which includes fuse replacement and line voltage selection. The oscilloscope’s high sensitivity and fast sweep capabilities are highlighted, with features such as pretrigger capture for viewing activity before a trigger event. Calibration and adjustments are crucial for maintaining the oscilloscope’s performance, ensuring precise voltage measurements and waveform displays.

Quick Issues Covered

  • Diagnose power-up failures using initial starting procedure guidelines.
  • Troubleshoot calibration issues with periodic adjustments and calibration check.
  • Use schematics for circuit tracing during instrument repair service.

Overview

B+K Precision’s Model 2522B is a low-cost, high-performance dual trace digital storage oscilloscope. It includes all the basic features needed by technicians and engineers, with a full analog mode and digital storage modes such as refresh, roll, and single sweep. The oscilloscope can store repetitive waveforms up to 20 MHz and is backed by B+K Precision’s long-standing reputation for reliable and durable test instruments. The manual covers safety precautions, features, specifications, controls and indicators, operating instructions, maintenance, and additional appendices.

Specifications

  • 20 MHz bandwidth
  • Dual trace
  • Analog mode
  • Digital storage modes: refresh, roll, single sweep
  • Equivalent time storage
  • 2048 samples across the screen
  • Sampling rate up to 10 Ms/s
  • X100 time base selections
  • 5 mV/div sensitivity
  • 1 mV/div and 2 mV/div with PULL X5 gain control

Safety & Warnings

Normal use of test equipment exposes users to electrical shock hazards, especially when testing where high voltage is present. Electrical shock causing 10 milliamps of current through the heart can stop most human heartbeats. Voltage as low as 35 volts dc or ac rms is dangerous and can produce a lethal current. Higher voltage poses a greater threat. To reduce risk, follow these precautions:

– Avoid exposing high voltage needlessly. Remove housings and covers only when necessary.
– Turn off equipment while making test connections in high-voltage circuits and discharge high-voltage capacitors after removing power.
– Familiarize yourself with the equipment being tested and the location of its high voltage points.
– Use insulated floor material or a large, insulated floor mat and an insulated work surface; ensure these surfaces are not damp or wet.
– Use the “one hand in the pocket” technique while handling an instrument probe and avoid contacting nearby metal objects.
– Touch only the insulated portion of a probe; never touch the exposed tip.
– Remember that ac line voltage is usually present on some power input circuits any time the equipment is connected to an ac outlet, even if turned off.
– Treat all two-wire ac powered equipment as “hot chassis” unless certain it has an isolated or earth ground chassis.
– Never work alone; someone should be nearby to render aid if necessary. Training in CPR first aid is recommended.

Download PDF (552.0 KB)

Leave a Comment