BK Precision 2520 Instruction Manual (PDF)

The manual for the ptt PRECISION Model 2520 Digital Storage Oscilloscope covers setup and operation procedures, including initial starting procedures, single and dual trace displays, and triggering methods. It also provides troubleshooting guidance such as fuse replacement, calibration checks, and instrument repair services.

  • Brand: BK Precision
  • Model: 2520
  • Type: manual
  • File size: 2.7 MB

Manual Overview

The Bk Manual for the ptt PRECISION Model 2520 Digital Storage Oscilloscope provides detailed guidance on troubleshooting, error diagnostics, calibration, and board-level adjustments. For troubleshooting, the manual emphasizes the use of the oscilloscope’s dual-channel capability to isolate and diagnose waveform issues. Error codes and diagnostics are not explicitly detailed, but the manual suggests utilizing the device’s various modes, such as the Armed Store Mode and Roll Mode, to capture and analyze waveform anomalies. Calibration and adjustments are facilitated through features like the calibrated voltage and time measurements, which ensure accuracy within a 43% margin. The manual also describes board-level guidance, particularly in using the X-Y operation mode for detailed waveform analysis and the use of the built-in probe adjust square wave generator for probe compensation. The oscilloscope’s triggering features, including auto sweep and three trigger source selections, are crucial for precise waveform capture and analysis.

Quick Issues Covered

  • Diagnostics for power-up failures and initial starting procedures.
  • Calibration checks and periodic adjustments for accurate measurements.
  • Error codes for troubleshooting triggering and sweep issues.

Overview

The ptt PRECISION Model 2520 is a 20 MHz dual-channel digital storage oscilloscope manufactured by DYNASCAN Corporation. The manual covers various aspects of the oscilloscope, including its specifications, controls, indicators, operating instructions, and features. It provides detailed guidance on frequency, pulse width, rise and fall time measurements, and more. The oscilloscope features a 1024 x 8-bit memory, a 2 Msample/sec sampling rate, and dual trace capabilities, among other technical specifications. The manual also includes safety precautions, equipment protection tips, and instructions for specific operations like X-Y mode applications and video signal observation.

Specifications

  • CRT: Rectangular with internal graticule.
  • Display Area: 8 X 10 div (1 div = 1 cm).
  • Accelerating Voltage: 2kV.
  • Maximum Input Voltage: 400 V (dc + ac peak) or 800 V ac p-p.
  • Sensitivity: 2 mV/div to 10 V/div in 1-2-5 sequence with vernier control.
  • Accuracy: 43%.
  • Input Resistance: 1 MΩ.
  • Input Capacitance: 28 pF.
  • Frequency Response: DC to 20 MHz (-3 dB).
  • Rise Time: 17.5 ns.
  • Analog Operating Modes: X-Y, CH 1, CH 2, Dual CH 1 and CH 2.
  • Chop Frequency: Approximately 500 kHz.
  • Polarity Reversal: CH 2 only.
  • Analog Sweep Speed (Norm mode): 0.5 μs/div to 0.2 s/div in 1-2-5 sequence.
  • Digitizing Sweep Speed (Store mode): 0.5 μs/div to 50 sec/div, 25 ranges in 1-2-5 sequence.
  • Sweep Magnification: 10 X.
  • Triggering Modes: Auto (free run) or Normal.
  • Trigger Source: CH 1, CH 2, or External.
  • Trigger Coupling: AC, DC, TV.
  • Refreshed: Stored data and display updated by triggered sweep (50 sec/div to 0.5 ms).

Download PDF (2.7 MB)

Leave a Comment