BK Precision 1740A Instruction Manual (PDF)

The manual for the B+K Precision Model 1740 DC Power Supply covers setup and operation instructions, including details on voltage and current adjustments, safety precautions, and connection configurations for various applications. It also provides troubleshooting guidance, such as dealing with electrical shock hazards and ensuring proper grounding to prevent damage and ensure user safety.

  • Brand: BK Precision
  • Model: 1740A
  • Type: manual
  • File size: 1.1 MB

Manual Overview

The B+K Precision Model 1740 DC Power Supply manual provides detailed guidance on troubleshooting, diagnostics, and maintenance for technicians. The power supply offers a 0-60V DC output and a 0-4A current range, with adjustable coarse and fine controls for precision. It features automatic crossover between constant voltage and constant current modes, indicated by LEDs. For troubleshooting, the manual emphasizes the importance of using a polarized 3-wire AC outlet to ensure proper grounding and reduce shock hazards. Error diagnostics involve monitoring the two large panel-mounted meters that display output voltage and current. Calibration involves setting current limits, which are adjustable from 5% to 100% of maximum output. The manual advises on board-level adjustments, such as using the high-low switch for current range selection to improve meter resolution. Safety precautions include avoiding high voltage exposure and using isolation transformers when necessary. The power supply is protected against reverse polarity and overload, ensuring reliability and safety during operation.

Quick Issues Covered

  • Diagnose power-up failures with voltage/current output checks.
  • Error codes for constant voltage/current mode issues.
  • Calibration procedures for precise voltage/current settings.

Overview

The B+K Precision Model 1740 DC Power Supply is a high-quality general-purpose DC power source providing 0-60 volts DC output and 0-4 amps current output. It features excellent regulation, low ripple characteristics, and a pre-regulator to reduce internal power dissipation. The power supply can operate in constant voltage or constant current modes, with automatic crossover and LED indicators for mode identification. It includes overload and reverse polarity protection and allows for flexible connections, including series and parallel configurations. The instrument is suitable for various applications such as service shops, engineering labs, production testing, school laboratories, and home use by hobbyists. The manual covers safety precautions, specifications, operating instructions, and maintenance.

Specifications

  • OUTPUT VOLTAGE
  • 0 to 60 VDC, coarse and fine adjustment
  • OUTPUT CURRENT
  • High Range — 0 to 4 A
  • Low Range — 0 to 1 A
  • CONSTANT VOLTAGE OPERATION
  • Voltage Regulation
  • Line (108-132) <0.2% + 2mV
  • Load (no load to full load) <0.04% + 2 mV
  • Recovery Time ≤100 µs typical
  • Ripple Voltage
  • RMS <1 mV
  • Temperature Coefficient
  • 0° to +40°C <300 PPM/°C
  • METERING
  • Voltmeter
  • Range 0 to 64 V
  • Accuracy ±2.5%
  • Ammeter
  • Hi Range 0 to 4.4 A
  • Lo Range 0 to 1.1 A
  • Accuracy ±2.5%
  • POWER REQUIREMENTS
  • Domestic: 120 VAC ±10%, 60 Hz
  • International: 120, 220, 230, 240 VAC, 50/60 Hz
  • POWER CONSUMPTION
  • Approximately

Safety & Warnings

Normal use of test equipment exposes users to potential electrical shock hazards, especially when testing in areas with exposed high voltage. An electrical shock with a current of 10 milliamps passing through the heart can be fatal. Voltages as low as 35 volts can be dangerous and potentially lethal under certain conditions. Users should follow accepted safety practices to avoid contact with high voltage and steer current away from the heart in case of accidental contact. Specific safety precautions include:

1. The power supply output can produce a maximum of 60 volts DC, posing an electrical shock risk. Greater danger exists if the output is connected to an external high voltage.
a. A serious shock hazard exists if the equipment under test is a “hot chassis” type unless it is unplugged or an isolation transformer is used.
b. If the equipment under test is powered and uses high voltage, the power supply outputs may float to the potential at the connection point. High voltage may appear unexpectedly in defective equipment. Do not float the power supply output to more than 100 volts peak with respect to chassis or earth ground.
c. Discharge high-voltage capacitors before making connections or tests if the equipment under test is off but uses high voltage in normal operation.

2. Use only a polarized 3-wire AC outlet to ensure the power supply chassis, case, and ground terminal are connected to a good earth ground, reducing electrical shock risk.

3. Avoid unnecessary exposure to high voltage. Remove housings and covers only when necessary, turn off equipment while making test connections in high-voltage circuits, and discharge high-voltage capacitors after removing power.

Download PDF (1.1 MB)

Leave a Comment