BK Precision 1739 Instruction Manual (PDF)

The manual for the B&K Precision model 1739 DC Power Supply provides detailed instructions for setup, operation, and troubleshooting, including connecting the instrument to an electrical ground, configuring the RS-232 interface, and replacing fuses. It also emphasizes safety precautions, such as avoiding operation in explosive atmospheres and ensuring that maintenance and repairs are conducted by qualified personnel.

  • Brand: BK Precision
  • Model: 1739
  • Type: manual
  • File size: 853.4 KB

Manual Overview

The B&K Precision model 1739 is a DC power supply offering 0-30 volts output with a 0-1 amp current range, adjustable via coarse and fine controls for precision. It features two LED meters for continuous monitoring of voltage and current, with the voltage meter in green and the current meter in red. The power supply can be controlled locally from the front panel or remotely through an RS-232 interface. It is designed with a pre-regulator to minimize internal power dissipation, ensuring excellent regulation and low ripple. For troubleshooting, the manual outlines self-test errors, calibration errors, and command errors. Calibration adjustments and fuse replacements are part of routine maintenance, with specific procedures detailed for each. Error codes are provided to assist in diagnostics, and board-level guidance is available for qualified personnel. Safety precautions emphasize grounding, avoiding explosive atmospheres, and handling electrostatic-sensitive components. The manual advises against unauthorized modifications and stresses the importance of using specified parts to maintain safety standards.

Quick Issues Covered

  • Diagnose self-test errors for B&K Precision 1739 power supply.
  • Identify calibration errors affecting voltage/current accuracy.
  • Trace circuit schematics for troubleshooting and repair guidance.

Overview

The B&K Precision model 1739 is a high-quality, low current DC power supply that provides 0-30 volts DC output and 0-1 amps current output, both adjustable with coarse and fine controls. It features two large LED meters for monitoring output voltage and current, with the voltage meter in green and the current meter in red. The power supply can be operated locally from the front panel or remotely via the RS-232 interface. It exhibits excellent regulation and low ripple characteristics, incorporating a pre-regulator to reduce internal power dissipation. The manual covers safety precautions, installation, operation, maintenance, and error messages.

Specifications

  • DC Power Supply with 0.1mA Settable Resolution
  • 0-30 volts dc output
  • Adjustable with both coarse and fine voltage controls
  • Current output is 0-1 amps
  • Adjustable with both coarse and fine current controls
  • Two large LED meters monitor output voltage and current
  • VOLTAGE meter is green
  • CURRENT meter is red
  • Can be programmed locally or remotely through RS-232 interface
  • Exhibits excellent regulation and low ripple characteristics

Safety & Warnings

The following safety precautions must be observed during all phases of operation, service, and repair of the instrument:

1. Ground the Instrument: To minimize shock hazard, the instrument chassis and cabinet must be connected to an electrical ground using the supplied three-conductor AC power cable. Do not alter the ground connection.

2. Do Not Operate in an Explosive Atmosphere: Avoid operating the instrument in the presence of flammable gases or fumes.

3. Keep Away from Live Circuits: Instrument covers should not be removed by operating personnel. Component replacement and internal adjustments must be made by qualified maintenance personnel. Disconnect the power cord before removing covers and replacing components.

4. Do Not Service or Adjust Alone: Ensure another person capable of rendering first aid and resuscitation is present during internal service or adjustments.

5. Do Not Substitute Parts or Modify the Instrument: Avoid installing substitute parts or performing unauthorized modifications. Return the instrument to B&K Precision for service and repair.

Warnings and Cautions:
– A WARNING statement indicates a procedure, practice, or condition that could result in injury or death if not followed correctly.
– A CAUTION statement indicates a procedure, practice, or condition that could result in damage to parts or the entire product if not followed correctly.

Specific Warnings and Cautions:
– WARNING: Do not alter the ground connection to prevent electric shock.
– WARNING: Disconnect power cord before removing covers to avoid electrical shock hazard.
– CAUTION: Check the rear panel AC line voltage indicator before connecting the line cord to avoid destroying AC line fuses.
– CAUTION: Follow proper procedures for handling, storing, and transporting parts with ESD-sensitive components to avoid damage.

Download PDF (853.4 KB)

Leave a Comment