BK Precision 1514 Instruction Manual (PDF)

The manual for the Bk MANUAL covers the setup and operation of a switching mode power supply, including instructions to plug the model 1514 into an AC outlet, turn on the power switch, and adjust the control knob to the desired voltage. It also provides troubleshooting information such as checking if the power light is on and ensuring the correct voltage is set.

  • Brand: BK Precision
  • Model: 1514
  • Type: manual
  • File size: 5.9 KB

Manual Overview

The Bk MANUAL provides detailed instructions for operating and troubleshooting the 1514 Switching Mode Power Supply. The device supports multiple output voltages: 3.3V, 4.5V, 6V, 7.5V, 9V, and 12V, each with specific minimum, typical, and maximum values. For troubleshooting, the manual emphasizes checking the input voltage and ensuring the power switch is on if the power light fails to illuminate. Error diagnostics involve verifying output voltage settings and inspecting connections for continuity. Calibration involves adjusting the control knob to achieve the desired voltage output, ensuring it remains within the specified range. The manual advises checking the insulation resistance and performing a withstanding test at 12V and 3A to ensure proper operation. Board-level guidance includes examining components for signs of wear or damage and ensuring all connections are secure. The device should be operated at an ambient temperature of 25°C for optimal performance.

Quick Issues Covered

  • Diagnose power-up failures with non-responsive power light.
  • Calibrate voltage output using control knob adjustments.
  • Check insulation resistance for potential faults.

Overview

The product is a switching mode power supply with adjustable output voltages of 3.3V, 4.5V, 6V, 7.5V, 9V, and 12V, each capable of delivering up to 3 Amps. It operates with an input voltage of 120VAC at 60Hz and is designed for an environment temperature of 25°C. The manual covers the operation of the power supply, including plugging the model 1514 into an AC outlet, turning on the power switch, and adjusting the control knob to the desired voltage.

Specifications

  • Description: 3.3/4.5/6/7.5/9/12VDC, 3Amps
  • Input Voltage: 120VAC 60Hz
  • Environment Temperature: 25C°
  • Rated Output 3.3V 3.1 3.3 3.6
  • Rated Output 4.5V 4.3 45 49
  • Rated Output 6V 5.8 6 6.4
  • Rated Output 7.5V 73 75 7.9
  • Rated Output 9V 8.8 9 9.4
  • Rated Output 12V 11.8 12 12.4
  • Output Current 3
  • Voltage Regulation:
  • Load (0- 100%) 300
  • Line (+- 10% variation) 60
  • Ripple & Noise (peak to peak) 100
  • No Load Input Current 60
  • Full Load Input Current 700
  • Insulation Resistance (SOO VDC) 100
  • Withstanding Test (@ 12V, 3A) 75 79

Controls & Indicators

Plug model 1514 into AC outlet. Turn power switch on, power light will come on. Adjust control knob to desired voltage.

Installation / Setup

Plug model 1514 into an AC outlet. Turn the power switch on, and the power light will illuminate. Adjust the control knob to the desired voltage.

Operation

Plug model 1514 into AC outlet. Turn power switch on, power light will come on. Adjust control knob to desired voltage.

Download PDF (5.9 KB)

Leave a Comment