BK Precision 1504 Instruction Manual (PDF)

The manual for the Bk 1504 power supply covers the setup and operation by instructing users to plug the device into an AC outlet, turn on the power switch, and adjust the voltage with a control knob to connect to either 12VAC or 12VDC outputs. It also provides troubleshooting information by specifying the typical output current, voltage regulation, and fuse specifications to ensure proper functionality.

  • Brand: BK Precision
  • Model: 1504
  • Type: manual
  • File size: 5.2 KB

Manual Overview

The Bk MANUAL provides detailed instructions for the operation and troubleshooting of the 1504 power supply, which offers both 0-12VDC and 12VAC outputs. The manual emphasizes the importance of proper calibration and adjustments to ensure optimal performance. For troubleshooting, it outlines a flow that begins with verifying input voltage and checking the power switch and control knob settings. If issues persist, technicians should inspect the output connections and measure the voltage levels to ensure they fall within specified ranges. The manual includes a section on error codes and diagnostics, advising technicians to check for blown fuses, which are rated at 1A and 0.5A, as potential causes of malfunction. Board-level guidance is provided for more in-depth troubleshooting, including checking for signs of damage or wear on the circuit board and ensuring all components are securely connected. Calibration involves adjusting the control knob to achieve the desired output voltage, with the DC output being variable from 0.1V to 12V and the AC output being constant. The manual stresses the importance of maintaining the environmental temperature at 25°C for accurate operation.

Quick Issues Covered

  • Diagnose power-up failures with incorrect output voltage levels.
  • Adjust output voltage using control knob for precise calibration.
  • Check and replace fuses for resolving power supply issues.

Overview

The product is a power supply unit that provides two outputs: 12VAC and 0-12VDC. It allows users to select between AC voltage and DC voltage. The manual covers the operation of the power supply, including plugging the model into an AC outlet, turning on the power switch, adjusting the voltage with a control knob, and connecting to either the 12VAC or 12VDC output.

Specifications

  • Output Voltage Range 0.1V 12V
  • Minimum Output Voltage 100mV
  • Maximum Output Voltage 12V 13.5V
  • Output Current 0.4A, typical
  • Load Voltage Regulation (0-100% load) 400mV
  • Line Voltage Regulation (100-130VAC Variation) 200mV
  • Ripple & Noise 100mVp-p
  • 12VAC Output Voltage No Load 12.5V 15V
  • 12VAC Output Voltage Full Load 11.5V
  • 12VAC Output Current 0.5A, typical
  • No Load Input current 50mA
  • Full Load Input Current (All rated load) 200mA
  • Fuse 1 1A, typical
  • Fuse 2 0.5A, typical
  • Dimensions (W X D X H): 101 mm x 140 mm x 83 mm
  • Weight: 0.90 kgs

Operation

Plug model 1504 into an AC outlet. Turn power switch on. Adjust voltage with control knob. Connect to either 12VAC (constant) or 12VDC (variable).

Download PDF (5.2 KB)

Leave a Comment