Rohde & Schwarz SME Service Manual Book2 Chapt4 (PDF)

The service manual for the Rohde & Schwarz SME provides detailed instructions on testing and repairing the digital synthesis module, including direct digital synthesis and buffer loop functions. It also covers troubleshooting procedures for issues such as faulty data transmission, clock signal discrepancies, and phase-locked loop synchronization problems, along with necessary measurement tools and equipment.

  • Brand: Rohde & Schwarz
  • Type: service manual
  • File size: 4.6 MB

Manual Overview

The service manual for the Rohde & Schwarz SME focuses on the maintenance and troubleshooting of the Digital Synthesis (DSYN) module. The DSYN module generates a precise sinusoidal signal using Direct Digital Synthesis (DDS) and includes a phase-locked loop known as the PUFFERSCHLEIFE for filtering non-harmonic signals. Troubleshooting involves checking various components like the SERBUS-D1, clock amplifiers, delay lines, and DACs for signal discrepancies. Error codes such as “Digital synthesis buffer VCO unlocked” indicate synchronization issues, which require verification of the phase-locked loop and related components. Calibration and adjustments are detailed, including checking power consumption, data transmission, and voltage regulators. The manual provides guidance on testing the oscillator and buffer loop behaviors, ensuring proper signal output. Board-level diagnostics involve inspecting specific components and connections, such as pin diodes and amplifiers, to resolve issues. The manual also outlines the necessary tools for service, including oscilloscopes and spectrum analyzers, to facilitate accurate troubleshooting and calibration.

Quick Issues Covered

  • Diagnose faulty data transmission via SERBUS-D1 and BUFFER.
  • Check clock signal deviations at P32/P33, CLOCK-AMPLIFIER issues.
  • Verify phase loop sync; check OSCILLATOR, VCO, and control amplifiers.

Overview

ROHDE& SCHWARZ provides a service manual for a digital synthesis module, identified by the code 1038.7344.01. The manual includes detailed instructions on testing and repairing the module, describing its functions, components, and processes. It covers aspects such as direct digital synthesis, buffer loops, and various testing procedures for signals and components. The document also lists necessary equipment for servicing, such as oscilloscopes and spectrum analyzers, and provides troubleshooting guidance for common issues.

Troubleshooting & Error Codes

The manual provides troubleshooting guidance for various issues related to the Digitale Synthese module. Here are some specific troubleshooting steps and error diagnostics:

1. Faulty Data Transmission: Check SERBUS-D1 (D110), SERBUS-BUFFER (D50), and the shift registers D150 and D155.

2. Clock Signal Out of Tolerance at P32/P33: Inspect the CLOCK-AMPLIFIER (V220, Diagnosis point 303).

3. Clock and Data Signal to DAC (D300) Out of Tolerance at P4/P14 and P5/P15: Examine the DELAY-LINE and the clock amplifier V210. Adjust the setup and hold time using R215 and R212 by changing the DELAY-LINE runtime.

4. Output Signal in CW Operation Out of Tolerance (DIG. MOD OFF): Check the voltage at P6 (-9.5V ± 1V). Inspect the PIN diode V603 and the OSCILLATOR.

5. Output Signal with PS Off Out of Tolerance (FSK-MOD. ON): Verify the voltage at P6 (11.6V ± 1V). Check the DDS-Gatearray D20, PIN diode V601, DAC (D300), ALIASING-FILTER (L405), and DDS-AMPLIFIER (N400).

6. Phase-Locked Loop (Buffer Loop) Not Synchronizing: Ensure the jumper X36/X37 is connected. Inspect the OSCILLATOR (V512), clock amplifiers V610 and V612, CONTROL-AMPLIFIER (N700, N702, D700, V702, V704). Check the voltage at P6 (-9.5V ± 1V) and inspect PIN diodes V603, V600, and V601. Verify the voltage at P9/P8 is 24V/0V ± 1V or 0V/24V ± 1V.

7. Error Message “Digital Synthesis Buffer VCO Unlocked”: Check if the phase-locked loop is synchronized (voltage at P7 should be 1V…21V, Diagnosis point 305). If not, follow the previous steps. Inspect the INTERRUPT-DETECTOR (N120, V150).

Download PDF (4.6 MB)

Leave a Comment