Kenwood TM-201 Service Manual (PDF)

The Kenwood TM-201 service manual provides detailed instructions for setting up and operating the VHF FM transceiver, including circuit descriptions, adjustments, and specifications. It also offers troubleshooting guidance through schematic diagrams and block diagrams to assist in diagnosing and resolving technical issues.

  • Brand: Kenwood
  • Model: TM-201
  • Type: service manual
  • File size: 2.9 MB

Manual Overview

The Kenwood TM-201A service manual provides detailed guidance for technicians on troubleshooting, diagnostics, calibration, and board-level adjustments for the VHF FM transceiver. The manual includes a comprehensive circuit description for both the RX and TX sections, detailing the signal flow and component functions. Troubleshooting is supported by a flowchart that guides technicians through common issues, with emphasis on checking the integrity of the signal path and verifying component functionality. Error codes and diagnostics are addressed through specific tests and measurements, particularly focusing on the PLL (Phase-Locked Loop) circuits, which are crucial for both transmission and reception. Calibration procedures are outlined for ensuring optimal performance, including adjustments of the VCO (Voltage-Controlled Oscillator) and power output levels. The manual also provides board-level guidance, with PC board views and schematic diagrams to assist in component identification and replacement. Additionally, it includes specifications and reference data for critical components like filters and amplifiers, ensuring technicians have the necessary information for effective servicing.

Quick Issues Covered

  • Diagnose power-up failures with voltage checks on Final unit.
  • Adjust frequency alignment using PLL circuit calibration procedures.
  • Trace circuits with detailed schematic diagrams for component-level repairs.

Overview

The document provides technical details about the Kenwood M-201A VHF FM Transceiver. It includes circuit descriptions for both the receive (RX) and transmit (TX) sections, as well as information on the PLL (Phase-Locked Loop) section. The manual covers various components and their functions, such as amplifiers, mixers, filters, and oscillators, and explains how signals are processed within the transceiver. Additionally, it provides specifications and ratings for different parts of the device, including frequency, bandwidth, and power output.

Specifications

  • Nominal center frequency: 455 kHz +1 kHz, 10.695 MHz
  • 6 dB bandwidth: +6 kHz or more (from 455 kHz)
  • 50 dB bandwidth: +12.5 kHz or less (from 455 kHz)
  • Ripple within pass bandwidth: 3 dB or less (within 455 kHz +5 kHz)
  • Loss: 60 dB or less
  • Guaranteed attenuation: 35 dB or more (Within 455 kHz+ 100 kHz)
  • Input and output impedance: 2.0 kΩ
  • Pass bandwidth: fy + 7.5 kHz or more at 30 dB
  • Attenuation band: fy +25 kHz or less at 40 dB, fy +45 kHz or less at 60 dB
  • Guaranteed attenuation: 70 dB or more within fy +1 MHz, 80 dB or more within fy ±(910 kHz+20 kHz)
  • Ripple: 1.0 dB or less
  • Loss: 1.5 dB or less
  • Terminal impedance: 3 kΩ
  • Center frequency (f,) and deviation: 455 kHz +1 kHz or less
  • Peak separation: 15 kHz or more
  • Voltage sensitivity: 1543 mV/kHz
  • Linearity: 455 +3 kHz or more
  • Temperature characteristics: +0.3% or less (Center frequency)
  • Operating: Vcc 25°C 7V
  • DC current: Icc 25°C 7A
  • Operating case: Tc (op) -30~+110°C
  • Storage temp.: Tstg -40~+110°C
  • Power input: Pin 25 Zg=22=50Ω 0.4W
  • Power output: Po 25 Zg=2?=50Ω 40 W

Download PDF (2.9 MB)

Leave a Comment