Kenwood TK-3140 Service Manual Addendum (PDF)

The Kenwood TK-3140 service manual addendum provides detailed instructions on using the Clone and Self-Programming modes, which allow for the transfer of programming data between radios and the modification of settings such as frequency and signaling. It also includes troubleshooting steps for entering these modes, setting passwords, and ensuring proper operation through realignment and function setting modes.

  • Brand: Kenwood
  • Model: TK-3140
  • Type: service manual
  • File size: 101.5 KB

Manual Overview

The Kenwood TK-3140 service manual addendum provides detailed instructions on the Clone and Self-Programming modes for the UHF FM transceiver. In Clone Mode, data can be transferred between radios by connecting them with a cloning cable. The master radio is set to Clone Mode by holding the [C] key during power-up, and if a password is required, it is entered using the tuning control knob. Once in Clone Mode, data is sent to the slave radio, which displays “PROGRAM” during the process and “END” upon completion. Self-Programming Mode allows for frequency and signaling adjustments without external programming units. Entering this mode involves removing a specific component (R351) and using the [Side 2] key during power-up. Channel and function settings, such as RX/TX frequencies and signaling, are adjusted via panel keys and stored in memory. The manual also outlines the Memory Reset Mode for clearing settings made in Self-Programming Mode.

Quick Issues Covered

  • Clone mode for data transfer between radios.
  • Self-programming mode entry and usage instructions.
  • Channel and function setting modes for customization.

Overview

The Kenwood TK-3140 is a UHF FM transceiver. The service manual includes information on the Clone and Self-Programming modes. The manual covers realignment procedures, including Clone Mode, where programming data can be transferred between radios, and Self Programming Mode, which allows for frequency and signaling adjustments. The manual also details channel and function setting modes, providing instructions for setting various functions and configurations without using the FPU. The transceiver does not come with an antenna, which is available as an option.

Operation

The operation of the Kenwood TK-3140 UHF FM Transceiver includes Clone Mode and Self Programming Mode. In Clone Mode, programming data can be transferred from one radio to another by connecting them via their external universal connectors. The master radio is turned on with a specific key held down, and if a password is set, it displays “CLONE LOCK.” The correct password must be entered using the tuning control knob. Once in “CLONE MODE,” the master can send data to the slave radio, which displays “PROGRAM” while receiving data. Upon completion, the master displays “END,” and the slave operates in User mode with the same program as the master.

In Self Programming Mode, the user can enter by deleting a specific component and pressing a key while powering on. This mode allows for frequency and signaling data programming. Channel Setting Mode and Function Setting Mode are available for making channel and function settings, respectively. These settings include RX/TX frequency and signaling, scan options, RF power, and more. Memory Reset Mode is used to clear data set in Self Programming Mode.

Download PDF (101.5 KB)

Leave a Comment