Kenwood AT-440 Instruction Manual (PDF)

The Kenwood AT-440 instruction manual provides detailed steps for installing the automatic antenna tuner unit into the HF transceiver TS-440S, including removing covers, connecting cables, and securing the tuner to the chassis. It also includes operational guidance and troubleshooting tips, such as ensuring correct cable installation and confirming normal tuner function with a dummy load.

  • Brand: Kenwood
  • Model: AT-440
  • Type: manual
  • File size: 145.5 KB

Manual Overview

The Kenwood AT-440 Automatic Antenna Tuner is designed for integration with the HF transceiver TS-440S, covering a frequency range of 3.5 to 29.7 MHz. It operates optimally within an input impedance of 50 ohms and an output impedance range of 20 to 150 ohms, with an insertion loss of less than 1 dB. For troubleshooting, ensure all connections are secure, particularly the 6-pin and 2-pin plugs. If the tuner fails to function, verify the wiring harness is correctly attached and not damaged. Error diagnostics involve checking the SWR, which should be less than 1.3 for motor stop. Calibration involves connecting a dummy load to the antenna connector and confirming normal operation. For board-level adjustments, ensure the coaxial cable is routed correctly to avoid pinching. Reassemble the unit by securing the top, filter, and bottom covers after confirming functionality.

Quick Issues Covered

  • Diagnose power-up failures with dummy load connection.
  • Ensure correct cable installation to avoid insulation damage.
  • Check tuner function after installation using power-on test.

Overview

The Automatic Antenna Tuner Unit AT-440 by Kenwood is designed for installation in the HF transceiver TS-440S. The manual provides specifications, installation instructions, and operational guidance for the unit.

Specifications

  • Frequency range : 3.5 to 29.7 MHz (All amateur bands)
  • Operating temperature : -10°C to +50°C (14°F to 122°F)
  • Input impedance : 50 ohms, unbalanced
  • Output impedance : 20 to 150 ohms (at SWR less than 2.5)
  • Insertion loss : Less than 1 dB
  • Maximum input power : 100 watts
  • SWR for motor stop : Less than 1.3
  • Minimum power for activation : Less than 3 watts
  • Current consumption : 13.8 VDC approx. 200 mA
  • 10 VDC approx. 80 mA
  • 5 VDC approx. 80 mA
  • Dimensions : Wide 74 x High 96 x Deep 215 (mm)
  • Weight : 1.2kg

Installation / Setup

The installation of the Automatic Antenna Tuner unit AT-440 involves several steps. First, remove the top cover, filter unit cover, and bottom cover of the HF transceiver TS-440S. Insert the Antenna Tuner assembly into the opening, ensuring correct orientation. Unplug the cable from the “FO” terminal on the filter unit and plug it into the “OUT” terminal of the AT unit. Secure the tuner to the chassis with the provided screws, being careful not to pinch any wires. Connect the necessary cables and connectors, including the coaxial cable, ensuring it is routed correctly. Finally, connect a dummy load to the antenna connector, turn on the power, and confirm the tuner functions normally. Reinstall all covers to complete the installation.

Download PDF (145.5 KB)

Leave a Comment