Icom IC-H16TMKII Service Manual (PDF)

The Icom IC-H16T MKII VHF Transceiver service manual provides detailed instructions for setup, operation, and troubleshooting, including specifications, circuit descriptions, and adjustment procedures. It emphasizes safety precautions such as avoiding exposure to liquids and ensuring correct power supply connections to prevent damage.

  • Brand: Icom
  • Model: IC-H16TMKII
  • Type: service manual
  • File size: 9.7 MB

Manual Overview

The Icom IC-H16T MKII VHF Transceiver service manual provides detailed guidance for servicing and troubleshooting the device. It emphasizes the importance of ensuring a problem is internal before disassembling the transceiver and advises against connecting the transceiver to power sources exceeding 16V or exposing it to liquids. The manual includes a comprehensive troubleshooting flow, highlighting the need to use insulated tools for adjustments and to avoid shorting circuits. It provides specific instructions for calibration and adjustments, including PLL, receiver, and transmitter adjustments. Error codes and diagnostics are not explicitly detailed, but the manual suggests using a 30-40 dB attenuator when connecting test equipment to prevent damage. Board-level guidance is provided with detailed layouts of the main, PLL, and display units, assisting technicians in identifying and replacing faulty components. The manual also includes ordering information for replacement parts, requiring specific details such as order numbers and component names.

Quick Issues Covered

  • Diagnose power-up failures by checking power supply connections.
  • Calibrate PLL circuits for frequency stability and performance.
  • Trace circuits using detailed schematics for troubleshooting.

Overview

The service manual provides detailed service information for the IC-H16T MKII VHF Transceiver. It includes safety warnings, ordering parts instructions, repair notes, and a comprehensive table of contents covering specifications, inside views, block diagrams, circuit descriptions, mechanical parts and disassembly, parts lists, adjustment procedures, board layouts, and voltage diagrams. The manual also details different versions of the transceiver for various regions, each with specific frequency ranges and channel spacing.

Specifications

  • Frequency coverage 146~-174 MHz
  • Frequency bandwidth 28 MHz
  • Channel spacing 25 KHz, 20 kHz, 12.5 kHz
  • Number of channels Up to 16
  • Antenna impedance 50 Q (unbalanced)
  • Current drain Receive Stand-by 80 mA, Max. audio output 250 mA, Transmit High 1.3A, Low 750 mA
  • Usable temperature range —25 °C~ +60 °C
  • Frequency stability +5 ppm
  • Dimensions 65 (W) x 196 (H) x 38 (D) mm
  • Weight 596 g
  • Output power High 5 W, 3 W; Low 1 W
  • Modulation system Variable reactance frequency modulation
  • Max. frequency deviation +5 kHz, +4 kHz, 2.5 kHz
  • Spurious emissions <0.25 µW
  • Harmonic emissions <0.25 µW
  • FM noise and hum <-40 dB
  • Receiver system Double-conversion superheterodyne
  • Intermediate frequency 1st 21.8 MHz, 2nd 455 kHz
  • Sensitivity 0.35 µV for 12 dB SINAD
  • Squelch sensitivity 0.4 µV
  • Adjacent channel selectivity >70 dB, >60 dB
  • Intermodulation rejection >70 dB
  • Spurious and image rejection >70 dB
  • Audio output power 500 mW
  • Audio output impedance 8Ω

Safety & Warnings

NEVER connect the transceiver to an AC outlet or to a DC power supply that uses more than 16 V. This will ruin the transceiver. DO NOT expose the transceiver to rain, snow, or any liquids. DO NOT reverse the polarities of the power supply when connecting the transceiver. DO NOT apply an RF signal of more than 20 dBm (100 mW) to the antenna connector. This could damage the transceiver’s front end.

Download PDF (9.7 MB)

Leave a Comment