Contents
hide
Overview
Refer to the PDF for details.
Specifications
- HP 8711A
- RF Network Analyzer
- Detection Options: External Detectors
- Narrowband Internal: for wide dynamic range measurements, tuned receiver, built-in
- Broadband Internal: for absolute power and frequency conversion measurements, diode detector, built-in
- Broadband External: diode detector, optional accessory
- Aux input: voltmeter, rear panel input
- Sweep Time: AUTO man
- Alt Sweep ON: each channel can have different frequency span, detection mode, number of points, etc.
- Spur Avoid ON: removes spurs from low level measurements, slows sweep
- Dither ON: shifts spurs, recommended for narrow frequency span measurements, no sweep speed penalty
- Limit Line: creates limit lines for testing
- Restore Defaults: restores default calibration
- Full Band: user cal of full frequency span at 801 points
- User Defined: select frequency span, number of points, spur avoid setting, then do cal
- Detector Zero: compensates for drift of (zeroes) internal and external broadband detectors
- Autozero: zeroes detectors when selected and as needed
- Manual Zero: zeroes detectors one time when selected
- Bandwidth: channel 1 places marker 1 at max, markers 5 and 6 at target, marker 3 at center frequency (CF)
- Tracking ON: updates search (for max, min, target) each sweep
- 75 Ohm Formats: option IEC
- System Bandwidth: Wide = fastest sweep, Medium (default) = medium sweep speed and dynamic range, Narrow = greatest dynamic range
- PRESET: resets analyzer to predefined instrument state
- Define Save: defines the combination of instrument state, calibration, and data to save
- Save ASCII: saves trace data in ASCII format for output only
Controls & Indicators
Refer to the PDF for details.
Installation / Setup
Refer to the PDF for details.
Operation
Refer to the PDF for details.
Troubleshooting & Error Codes
Refer to the PDF for details.
Safety & Warnings
Refer to the PDF for details.
Download CARD Manual (PDF – 229.5 KB)
HP 8711A Quick Reference Manual PDF for CARD model: assists technicians in troubleshooting and calibrating equipment efficiently.
- Brand: Hp-8711a-quick-reference
- Model: CARD
- Type: Manual
- File size: 229.5 KB
Overview
Brief overview of the product.
Specifications
- Key spec 1
- Key spec 2
Controls & Indicators
Control panel/button layout.
Installation / Setup
- Step 1…
- Step 2…
Operation
Basic usage, modes, cycles.
Troubleshooting & Error Codes
| Issue / Code | Fix |
|---|---|
| Example | How to fix… |
Safety & Warnings
- Important warning…