The HP 5308A Timer/Counter manual provides detailed instructions for installing, operating, and maintaining the device, including information on its frequency measurement capabilities, front panel controls, and rear panel connectors. It also includes troubleshooting guidance, parts lists, schematic diagrams, and specific instructions for different serial prefix numbers to ensure proper functionality and maintenance.
Overview
The HP 5308A is a 75 MHz Timer/Counter designed for use with the 5300B mainframe. It can measure frequency, frequency ratio, period, period average, time interval, and time interval average. The device features a single-channel or two-channel totalize function, front panel controls for function and time base selection, and rear panel connectors for various outputs. The manual provides information necessary for installation, operation, and maintenance, including theory of operation, parts lists, component locator illustrations, and a schematic diagram.
Specifications
- INPUT CHANNELS A AND B FREQUENCY COUNTED: 10 MHz.
- RANGE: DC Coupled; 0 to 75 MHz
- AC Coupled; 20 Hz to 75 MHz
- SENSITIVITY: (Min) 25 mV rms sine wave to 10 MHz. 50 mV rms sine wave to 75 MHz, 150 mV p-p pulse at minimum pulse width of 10 ns. Input must be less than 1V rms from 50 to 75 MHz with Attenuator switch in X1 position. Sensitivity can be decreased by 10 using Attenuator switch.
- IMPEDANCE: 1 MO shunted by less than 48 pF.
- OVERLOAD PROTECTION: +
- DC Range:
- Xl: DC te 400 kHz 125V rms
- 400 kHz to 5 MHz Vrms = (x10")-(Hz)
- 5 MHz to 75 MHz 10V rms
- X10: DC to 4 MHz 250V rms
- 4 MHz to 75 MHz Vrms = (1×10°)-(Hz)
- AC Ranges:
- DC to 10 Hz 200V peak in addition to above ratings.
- TRIGGER LEVEL: Set position centers triggering at 0 volts, or continuously variable over the range of +2.0V with Attenuator in X1 position
Controls & Indicators
Refer to the PDF for details.
Installation / Setup
Refer to the PDF for details.
Operation
Refer to the PDF for details.
Troubleshooting & Error Codes
Refer to the PDF for details.
Safety & Warnings
Refer to the PDF for details.
Download ONLY Operation manual (PDF – 2.4 MB)
HP 5308A Operation Manual PDF: Guide for technicians to operate and troubleshoot the HP 5308A model. File size: 2.4 MB.
- Brand: Hp-5308a-operation
- Model: ONLY
- Type: Operation manual
- File size: 2.4 MB
Overview
Brief overview of the product.
Specifications
- Key spec 1
- Key spec 2
Controls & Indicators
Control panel/button layout.
Installation / Setup
- Step 1…
- Step 2…
Operation
Basic usage, modes, cycles.
Troubleshooting & Error Codes
| Issue / Code | Fix |
|---|---|
| Example | How to fix… |
Safety & Warnings
- Important warning…
Downloads
Download ONLY operation manual (PDF)