Contents
hide
Overview
Refer to the PDF for details.
Specifications
- Display: 4 digits. Characters 0-9, ACFHPU.
- Fault detection accuracy: 100% probability of detecting single-bit errors; 99.998% probability of detecting multiple-bit errors.
- Composite signature: Maximum number of signatures: No limit.
- Signature memory: Signatures recallable by probe switch: The last 32 signatures triggered by probe switch.
- Clock: Maximum frequency: 25 MHz. Minimum clock time: 15 nsec in high or low state.
- Pulse stretching: 100 msec on gate and unstable lamps.
- Setup time: 10 ns with 0.2V overdrive. (Data to be valid at least 10 ns before selected clock edge.)
- Hold time: 0 ns. (Data to be held until occurrence of selected clock edge.)
- Start, stop, qualifier: Setup time: 20 ns with 0.2V overdrive. (Data to be valid at least 20 ns before selected clock edge.)
- Minimum gate length: 1 clock cycle (1 data bit) between START and STOP.
- Maximum gate length: No limit.
- Minimum timing between gates: 1 clock cycle between STOP and START.
- Probe: 50k0 to ground nominal.
- Pod: 100kQ to ground nominal.
- CMOS sense: 7000 nominal.
- Probe: ±150V continuous. ±250V intermittent. 250V ac for 1 minute.
- Pod: ±20V continuous. ±140V intermittent. 140V ac for 1 minute.
- CMOS sense: 20V dc maximum.
- Logic one: 70% of sensed voltage nominal.
- Logic zero: 30% of sensed voltage nominal.
- Pod: 50% of sensed voltage nominal.
- Signature: Four seven-segment digits with decimal point.
- Lamps: Key status: Recall, edit, signature latch, unstable latch, qualify mode, timing polarities.
- Programmable: Remote, talk, listen, SRQ.
- Status: Composite signature, gate, unstable.
- Probe: Logic levels indicated: High, low, open and pulsing with 100 msec stretching.
- Minimum pulse width: 10 nsec.
- Switch: Under normal operation, pushing probe switch enters signatures into memory.
- Selectable power: 115V 410%-25% ac line, 48-440 Hz. 230V +10%-15% ac line, 48-66 Hz. 25VA maximum.
- Operating environment: Temperature: 0-55°C. Humidity: 95% RH at +40°C. Altitude: 4600M (15,000 ft.)
- Size: 89 mm high X 216 wide 279 mm deep.
- Net weight: 2.4 kg (5.3 lbs)
- Shipping weight: 4.1 kg (9 Ibs)
- Logic one: 2 Volt + 24.3
- Logic zero: 0.8 Voit + .3-.2
- Pod: 1.4 Volt £.6
Controls & Indicators
Refer to the PDF for details.
Installation / Setup
The SOURCE does not provide specific information on installation or setup highlights such as wiring, clearances, calibration, or prerequisites.
Operation
Refer to the PDF for details.
Troubleshooting & Error Codes
“”
Safety & Warnings
Refer to the PDF for details.
Download 3 Service manual (PDF – 3.2 MB)
HP-5006A Model 3 Service Manual: Troubleshoot and calibrate with step-by-step instructions. File size: 3.2 MB.
- Brand: Hp-5006a-operating-service-sec-1
- Model: 3
- Type: Service manual
- File size: 3.2 MB
Overview
Brief overview of the product.
Specifications
- Key spec 1
- Key spec 2
Controls & Indicators
Control panel/button layout.
Installation / Setup
- Step 1…
- Step 2…
Operation
Basic usage, modes, cycles.
Troubleshooting & Error Codes
| Issue / Code | Fix |
|---|---|
| Example | How to fix… |
Safety & Warnings
- Important warning…
Downloads
Download 3 service manual (PDF)