Heathkit EUW-27 Sine Square Wave Generator Schematics (PDF)

The Heathkit manual provides detailed instructions for setting up, operating, and troubleshooting the sine and square wave generator, including specifications for frequency range, output voltage, and impedance. It also includes information on power requirements, dimensions, and weight, ensuring users can effectively utilize and maintain the equipment.

  • Brand: Heathkit
  • Model: EUW-27
  • Type: manual
  • File size: 149.7 KB

Manual Overview

The Heathkit SCHEMATICS manual provides detailed guidance on troubleshooting, diagnostics, and calibration for the sine and square wave sections of the Heath Sine-Square Wave Generator, Model EUW-27 479. For troubleshooting, technicians are advised to follow a logical flow, starting with verifying power supply voltages and checking for correct output impedance settings, which vary depending on the voltage range. Error codes or specific diagnostics are not explicitly mentioned, but technicians should monitor output voltage levels and distortion rates, ensuring they remain within specified limits. Calibration involves adjusting the frequency response and amplitude settings, using the provided schematic to locate components such as the feedback and tuning adjustments. Board-level guidance includes checking the integrity of connections and components like resistors and capacitors, ensuring they meet the specified values and tolerances. The manual emphasizes the importance of using a voltmeter with at least 11 megohm input impedance for accurate voltage measurements.

Quick Issues Covered

  • Diagnose power-up failures due to faulty silicon rectifiers.
  • Calibrate output voltage using variable impedance settings.
  • Trace circuits with detailed schematic for Heathkit EUW-27 model.

Specifications

  • Frequency Range: 20 cps to 1 megacycle
  • Frequency Response: +1.5 db
  • Output Voltage (into a high impedance load): 0-10 volts rms, 0-1 volt rms, 0-0.1 volt rms, 0-.01 volt rms
  • Output Impedance (±10%): Variable on 10 volt range, 0 to 3500 ohms, 600 ohms on 1 volt, 0.1 volt, and 0.01 volt ranges
  • Distortion (from 20 to 20,000 cps): Less than 0.25%
  • Square Wave Frequency Range: 20 cps to 1 megacycle
  • Square Wave Output Voltage (into a high impedance load): 0-10 volts P to P, 0-1 volt P to P, 0-0.1 volt P to P
  • Square Wave Output Impedance (±10%): Variable on 10 volt range, 0 to 220 ohms, 52 ohms on 1 volt and 0.1 volt ranges
  • Rise Time: Less than 0.15 microsecond
  • Frequency Accuracy: +5%
  • Power Requirements: 105-125 volts, AC, 50/60 cps, 55 watts
  • Dimensions: 11-1/4" wide x 6-3/4" high x 10-1/2" deep
  • Net Weight: 11-1/4 lbs
  • Shipping Weight: 13 lbs

Download PDF (149.7 KB)

Leave a Comment