Heathkit AS-1363 Speaker Schematics (PDF)

The manual provides a detailed circuit description for setting up and operating a Heathkit 3-way bookshelf speaker system, explaining the roles of capacitors, inductors, resistors, switches, and fuses in managing frequency distribution and protection for each speaker component. It also includes troubleshooting information by describing how each component, such as the midrange, woofer, and tweeter, is electrically isolated and protected within the system.

  • Brand: Heathkit
  • Model: AS-1363
  • Type: manual
  • File size: 459.9 KB

Manual Overview

The Heathkit SCHEMATICS manual provides detailed guidance on the circuit design and functionality of a three-way bookshelf speaker system. Each speaker component—woofer, midrange, and tweeter—is treated as an individual circuit with a shared input. The woofer circuit utilizes inductor L1 to manage frequencies below 750 Hz, while capacitor C1 and resistor R1 ensure an 8-ohm load. Fuse F1 offers protection to the woofer. The midrange circuit employs capacitor C2 to filter frequencies below 750 Hz, with switch SW1 and resistor R2 providing series attenuation. Fuse F2 safeguards the midrange speaker. The tweeter circuit features a high-pass filter formed by capacitor C3 and inductor L2, with a 12 dB/octave roll-off at 4000 Hz. Resistor R3 and switch SW2 with resistor R4 adjust the tweeter’s output level, and fuse F3 protects the tweeter. The manual emphasizes the importance of consulting the schematic diagram for troubleshooting and adjustments, ensuring technicians can effectively diagnose and resolve issues at the board level.

Quick Issues Covered

  • Diagnose power-up failures using circuit isolation techniques.
  • Calibrate midrange frequency response with SW1 and R2 adjustments.
  • Trace circuit paths using schematic for component-level troubleshooting.

Specifications

  • Inductor L1 passes frequencies below 750 Hz to the woofer.
  • Capacitor C1 and resistor R1 maintain an 8-ohm load for inductor L1.
  • Fuse F1 protects the woofer speaker.
  • Capacitor C2 rolls off frequencies below 750 Hz at 6 dB/octave.
  • Switch SW1 and resistor R2 are used for series attenuation in the midrange.
  • Fuse F2 protects the midrange speaker.
  • Capacitor C3 and inductor L2 form a high-pass filter with a 12 dB/octave roll-off at 4000 Hz.
  • Resistor R3 is a series attenuator for the tweeter.
  • Switch SW2 and resistor R4 attenuate the tweeter 3 dB.
  • Fuse F3 protects the tweeter speaker.

Download PDF (459.9 KB)

Leave a Comment