The Heathkit AO-1 Audio Oscillator manual provides detailed instructions for setting up and operating the device, including its frequency range, output voltage, and power requirements. It also includes troubleshooting guidance to address common issues related to distortion and generator impedance.
Manual Overview
The Heathkit AO-1 Audio Oscillator manual provides detailed schematics and instructions for troubleshooting, calibration, and adjustments. The oscillator operates within a frequency range of 20 to 20,000 cps across three ranges, with an output voltage of 10 volts for both sine and square waves. Troubleshooting involves checking the generator impedance, which is 600 ohms, and ensuring distortion remains below 0.6% within the audible range. For diagnostics, technicians should verify power requirements of 30 watts at 105-125 volts AC. Calibration adjustments include setting the frequency and output controls accurately, using the provided schematic to identify component placements and connections. Board-level guidance involves inspecting and replacing components as needed, ensuring the switch positions and connections are correct as per the schematic. The manual emphasizes the importance of maintaining the specified rise time of 2 microseconds for square waves and ensuring all components are within tolerance to achieve optimal performance.
Quick Issues Covered
- Diagnose power-up failures with 105-125V, 50-60Hz AC input issues.
- Calibrate frequency range from 20 to 20,000 cps accurately.
- Adjust output voltage for consistent 10V sine and square wave signals.
Overview
HEATHKIT MODEL AO-1 AUDIO OSCILLATOR is an audio oscillator with a frequency range of 20 to 20,000 cps, available in three ranges. It provides an output voltage of 10 volts for both sine and square waves, with a generator impedance of 600 ohms. The distortion is less than 0.6% across the audible range. It requires 30 watts of power and operates on 105-125 volts, 50-60 cycles AC. The dimensions are 71″ high, 133″ wide, and 73″ deep, with a shipping weight of 14 lbs.
Specifications
- Frequency Range 20 to 20,000 cps, in three ranges
- Output Voltage (Sine Wave) 10 volts, no load, plus or minus 1 db.
- Output Voltage (Square Wave) 10 volts, rise time 2 microseconds, (10-90%)
- Generator Impedance 600 ohms
- Distortion Less than 0.6%, 100 cps through audible range
- Power Requirements 30 watts, 105-125 volts, 50-60 cycles AC
- Dimensions 71" high, 133" wide, 73" deep.
- Shipping Weight 14 lbs.