The Hallicrafters Model SR-2000 service manual covers setup and operation instructions, including details on the Amplified Automatic Level Control (AALC) for preventing signal splatter and features such as Receiver Incremental Tuning (RIT) and noise blanker circuits. It also provides troubleshooting guidance for issues like television interference, recommending the use of a low-pass filter in certain situations.
Manual Overview
The Hallicrafters Model SR-2000 transceiver service manual provides detailed instructions for troubleshooting, diagnostics, calibration, and board-level adjustments. The troubleshooting flow involves systematic checks of the transceiver’s 19 tubes, voltage regulator, and 22 diodes, which are integral to its double conversion heterodyning system. Error codes and diagnostics are not explicitly detailed, but technicians are advised to monitor the built-in metering for the final amplifier tubes, which includes separate plate voltage, plate current, and screen current meters. Calibration is facilitated by a 100 KC crystal calibrator for precise dial adjustments, ensuring less than 2 KC error across the dial. The manual emphasizes the importance of understanding the transceiver’s components, such as the AALC circuitry, noise blanker, and RIT control, for effective operation and maintenance. Board-level guidance includes the layout and function of each tube, such as the 12DK6 Receiver RF Amplifier and 6AQ5 Audio Output, ensuring technicians can perform detailed repairs and adjustments.
Quick Issues Covered
- Diagnose power-up failures with P-2000 power supply issues.
- Adjust Receiver Incremental Tuning (RIT) for precise frequency control.
- Use schematics for tracing AALC circuitry to prevent signal splatter.
Overview
The Hallicrafters Model SR-2000 Transceiver is a high-performance, compact transceiver designed for amateur radio use. It operates on the 80, 40, 20, 15, and 10 meter amateur bands, utilizing 19 tubes, a voltage regulator, and 22 diodes in a double conversion heterodyning system for SSB and CW signals. Key features include an Amplified Automatic Level Control (AALC) to prevent signal splatter, a noise blanker circuit, VOX or PTT control options, and Receiver Incremental Tuning (RIT) for precise frequency adjustments. The transceiver is capable of operating at the maximum legal power limit with a power supply, antenna, key, and microphone. It also includes features for TV interference suppression and a built-in 100 KC crystal calibrator for accurate dial calibration.
Specifications
- Tubes: 19 tubes plus one voltage regulator and 22 diodes
- Frequency Coverage: Full frequency coverage of the amateur bands in eight ranges
- Heterodyne Oscillator Crystals: Type CR-18A/U in HC-6 holder
- Types of Emission: SSB – Selectable USB/LSB with suppressed carrier, CW – Keyed RF carrier
- Frequency Control: Self-contained VFO for transmit and receive modes
- Transmission Control: Single Sideband Operation, MOX – Manual (Push-to-talk), VOX – Voice control, CW Operation, MOX – Manual, VOX – Automatic break-in
- Dial Calibration: One KC increments
- Calibration Accuracy: Less than 2 KC error across the dial after indexing at high frequency end of the dial
- Frequency Stability: Less than 250 cycles drift in first hour, after a fifteen minute warm-up
- Cable Connector Data: MIC connector – Amphenol type 80-MC2M, PHONES jack – Standard 1/4-inch two conductor phone plug
- Power Supply Requirements: Model P-2000
- Construction: Light weight aluminum
- Dimensions (HWD): 7-3/4 x 16-1/2 x 15 inches
- Wet Weight: 26 pounds
- Shipping Weight: 30 pounds
- Power Input: SSB HIGH POWER – 2000 watts PEP, SSB LOW POWER – 1000 watts PEP, CW – 900 watts maximum
- Power Output: SSB HIGH POWER – 1000 watts PEP, SSB LOW POWER – 500 watts PEP, CW – 500 watts
- Output Impedance: 50 ohms nominal
- Type of Sideband Generation: Solid state modulator with 1650 KC, 6 pole crystal filter
- Microphone Input: High impedance
- Audio Response: Overall 500 to 2400 CPS
- Distortion Products: 30 DB signal to distortion ratio
- Unwanted Sideband Rejection: 50 DB below desired output
- Carrier Suppression Capability: 60 DB below PEP output
- Spurious Emission: 50 DB or more below PEP output
- CW Side Tone: 800 CPS nominal
- Antenna Input: 50 ohms nominal