Hallicrafters CRX-103 Service Manual (PDF)

The service manual for the Hallicrafters Model GRX-103 provides detailed instructions for dial cord restringing, including the removal of the cabinet and front panel, and outlines the alignment procedure using specific equipment like an RF signal generator and audio output meter. It also includes a service repair parts list with descriptions and part numbers for components such as capacitors, resistors, coils, transformers, transistors, and diodes.

  • Brand: Hallicrafters
  • Model: CRX-103
  • Type: service manual
  • File size: 697.0 KB

Manual Overview

The Hallicrafters GRX-103 service manual provides detailed instructions for troubleshooting, calibration, and adjustments. The manual outlines a step-by-step process for dial cord restringing, which involves removing the cabinet and front panel, adjusting the timing drum, and ensuring the dial pointer spans the entire scale. For calibration, an RF signal generator and an audio output meter are required. The alignment procedure involves connecting the signal generator to the receiver and adjusting various components like Ti, T2, T3, T4, L6, and C54 for optimal performance. The manual does not specify error codes or diagnostics but provides a comprehensive parts list for board-level repairs, including capacitors, resistors, coils, transformers, transistors, and diodes. It emphasizes using nonmetallic tools for adjustments and provides specifications for each component to ensure accurate replacements and repairs.

Quick Issues Covered

  • Diagnose power-up failures with 117 VAC, 60Hz power source issues.
  • Calibrate squelch sensitivity using RF signal generator and audio meter.
  • Trace circuit faults using detailed schematics and parts list.

Specifications

  • Circuit: Single band superheterodyne with tuned RF stage.
  • Circuit contains 11 transistors and 5 diodes.
  • Controls: TUNING, VOLUME, SQUELCH
  • Tuning Range: 30~50MHz
  • Input Impedance at Antenna Connector: 75 ohms
  • Sensitivity: 6 UV MAX, for 12DBS/N
  • Selectivity (IF): 250KHz MAX, at 6 DB; 600KHz MAX, at 20 DB
  • Image Rejection: 25 DB MIN, at 50MHz
  • IF Rejection: 40 DB MIN, at 30MHz
  • IF Frequency: 10, 7MHz
  • AGC Figure of Merit: 40 DB MIN
  • Squelch Sensitivity: 7 uv MIN
  • Capability: 50 uv MIN
  • Audio Output: 1.0 watt
  • Audio Distortion: 10% MAX, at 1.0 watt

Controls & Indicators

The front-panel controls/indicators for the Hallicrafters Model GRX-103 include TUNING, VOLUME, and SQUELCH.

Installation / Setup

The source provides details on dial cord restringing and alignment procedures for the Hallicrafters Model GRX-103. For dial cord restringing, it involves removing the cabinet and front panel, slipping the dial cord out of the dial pointer, removing the dial plate, and following a specific stringing order. The alignment procedure requires an RF signal generator, an audio output meter, and a nonmetallic alignment tool. Specific steps include setting controls, connecting equipment, and adjusting for maximum output.

Download PDF (697.0 KB)

Leave a Comment