BK Precision 801 Calibration Manual (PDF)

The manual for Model 801 covers the calibration, circuit description, and operation of various tests including shorts, opens, leakage, capacity value, and electrolytic tests. It provides detailed instructions for setting up each test, adjusting controls for accurate readings, and troubleshooting by interpreting meter indications to determine if components are good or bad based on specific resistance and capacitance criteria.

  • Brand: BK Precision
  • Model: 801
  • Type: manual
  • File size: 2.6 MB

Manual Overview

The Bk Model 801 manual outlines procedures for calibrating and troubleshooting various tests, including shorts, opens, leakage, capacity value, and electrolytic tests. For the shorts test, a 25-ohm resistor is used to calibrate the meter, with the meter indicating “bad” if the shunting resistance is less than 25 ohms. The opens test involves adjusting controls to achieve a minimum reading, with a 50-ohm resistor verifying calibration. The leakage test uses a 5 megohm resistor to adjust the meter for infinity at the leakage scale’s left side, with different settings for 3 and 100 volts. The capacity value test employs an A.C. VTVM to measure voltage changes proportional to the capacitor’s reactance. The electrolytic test requires standard capacitors for calibration, ensuring the meter reads accurately at specified positions. Each test’s circuit description provides insight into the electrical principles governing the meter’s operation, emphasizing the importance of precise calibration for accurate diagnostics.

Quick Issues Covered

  • Calibrate Shorts Test with 25 ohm resistor for accurate readings.
  • Adjust Opens Test using R-122 and C-108 for minimum meter reading.
  • Simplified schematics aid in circuit tracing for Shorts and Opens tests.

Download PDF (2.6 MB)

Leave a Comment