The B&K Precision Model 606 Tube Tester manual provides detailed instructions for setting up and operating the device, including testing various types of tubes for shorts, leakage, grid emission, and quality under simulated operating conditions. It also includes troubleshooting guidance, such as using a neon lamp to detect shorts and employing a sensitive grid current check to identify issues like grid contamination and gas presence.
Manual Overview
The B&K Precision Model 606 Tube Tester is designed to test a wide range of tubes used in radio, television, and hi-fi equipment, including voltage regulator and thyratron tubes. It automatically checks for shorts and leakage up to one megohm, using a neon lamp indicator for shorts detection. The tester evaluates grid emission, gas, and grid contamination through a sensitive grid current check, revealing issues with as little as 2 to 3 microamperes of current. Each section of multi-section tubes is tested separately, and the quality test assesses cathode emission under load conditions to simulate actual operation. The grid emission and gas test circuit employs a 5.6 megohm resistor to detect current flow from grid to plate, indicating contamination or gas presence. For operation, users refer to a chart to set heater voltage and control positions before inserting the tube into the appropriate socket. This process ensures accurate diagnostics and identification of defective tubes requiring replacement.
Quick Issues Covered
- Diagnoses grid emission and gas issues in electron tubes.
- Tests for shorts and leakage using a neon lamp indicator.
- Includes schematics for circuit tracing and troubleshooting.
Overview
The TUBE TESTER Model 606, known as the Dyna Jet, is designed to test a wide range of commonly used tubes in radio and television sets, as well as many voltage regulator, thyratron, industrial, and European types of tubes. It automatically checks for shorts and leakage, and performs sensitive tests for grid emission, gas, and grid contamination. Each section of a multi-section tube is checked separately, and the quality of a tube is assessed through a cathode emission test under load conditions. The manual provides operating instructions and emphasizes the tester’s dependability, accuracy, and ease of use.
Operation
Look up the tube in the chart. Set the Heater to the voltage indicated in the Heater column of the chart. Set the “A”, “B”, and “C” controls to the positions indicated on the chart. Insert the tube into the proper socket.