BK Precision 2835 Instruction Manual (PDF)

The manual for the B+K Precision Model 2835 multimeter provides detailed instructions on setup, operation, and troubleshooting, including guidance on safety, function selection, and measurements such as voltage, current, resistance, capacitance, frequency, and diode testing. It also covers maintenance procedures like fuse replacement and battery installation, and offers information on the use of special features such as data hold, min/max mode, and relative measurement.

  • Brand: BK Precision
  • Model: 2835
  • Type: manual
  • File size: 473.3 KB

Manual Overview

The B+K Precision Model 2835 is a bench-type 3-3/4 digit multimeter designed for both portability and precision. It features a rotary function switch for basic operations and push-button switches for special functions like data hold, MIN/MAX, and relative measurements. The multimeter includes a backlit LCD display with a 42-segment analog bar graph and various annunciators for ease of use. It supports AC/DC voltage and current, resistance, capacitance, frequency, diode, and continuity testing. For troubleshooting, the manual provides guidance on error codes and diagnostics, emphasizing the importance of checking fuse integrity and ensuring proper range selection. Calibration and adjustments are addressed through manual and auto-ranging options, with specific accuracy parameters detailed for each measurement type. The manual also includes board-level guidance for fuse replacement and battery installation, ensuring safe and effective maintenance. The multimeter is protected by high-energy fuses on current ranges and features overload protection up to 1000 VDC or AC peak. Optional accessories are available to expand its capabilities.

Quick Issues Covered

  • Diagnose power-up failures with AC/DC voltage measurement guidance.
  • Resolve error codes using manual and auto ranging instructions.
  • Calibrate using detailed schematics and circuit tracing techniques.

Overview

The B+K Precision Model 2835 is a bench-type 3-3/4 digit multimeter designed for both portability and precision. It includes standard digital multimeter functions such as AC & DC voltage, AC and DC current, and resistance measurements. Additionally, it can measure capacitance, frequency, and features a diode test, continuity test, and an adapter range. The multimeter is user-friendly, with a single rotary Function switch and autoranging for basic functions, and push button switches for special features. It has a 3-3/4 digit backlighted LCD display with automatic minus sign, low battery indicator, unit of measure annunciators, and overrange indication. Special features include data HOLD, MIN/MAX, RELative, DELAY Hold, and manual RANGE selection, along with a 42-segment analog bar graph. The unit is housed in a rugged plastic case with a carrying handle and storage compartment for test leads and a carrying strap. It can operate from six AA batteries for full portability and includes safety features like safety jacks, safety test leads, and extensive overload protection with high energy fuse protection on current ranges.

Specifications

  • Display: 3-3/4-digit LCD, 4000 counts, analog bar graph, function/units annunciators
  • Measurement Rate: 2 times per second nominal, 1 time per second for Capacitance and Frequency mode
  • Analog Bar Graph: 42 segments, 20 times per second
  • Backlight: LED illumination
  • Polarity: Automatic, Negative (—) polarity indication
  • Over Range Indication: MSD blinks
  • Ranging: Automatic and Manual ranging
  • Operating Temperature: 0°C to 50°C at <70% RH
  • Storage Temperature: —30°C to 70°C at <80% RH
  • Temperature Coefficient: 0.15 x (specified accuracy) / °C (< 18°C or > 28°C)
  • Power Requirements: 90-264 VAC, 50/60 Hz, 10 W or 6 AA batteries
  • Maximum Voltage to earth: 1000 VDC or AC peak from any terminal
  • Battery Life: 1800 typical with alkaline battery, 80 hours with continuous backlight
  • Size: 2.87” x 8.58” x 7.68” (73 x 218 x 195 mm)
  • Weight: 3 lb (1.3 kg) without power cord
  • Accessories Supplied: Carrying Strap, AC Power Cord, Test Leads, Instruction Manual

Safety & Warnings

The safety warnings and precautions explicitly present in the manual include:

1. Safety features of the multimeter include safety jacks and safety test leads.
2. Extensive overload protection is provided, including high energy fuse protection on both mA and 10A ranges when measuring current.
3. The maximum voltage to earth is specified as 1000 VDC or AC peak from any terminal.
4. Overload protection details include a 1 A/600 V fuse on mA inputs and a 15 A/600 V fuse on 10 A input, both being fast blow ceramic fuses.

Download PDF (473.3 KB)

Leave a Comment