The Bk MANUAL for Model 2120 covers the setup and operation of the oscilloscope, including features like dual trace display, triggering modes, and calibrated measurements, as well as safety precautions to prevent electrical shock. It also provides troubleshooting tips, such as fuse replacement and periodic adjustments, to ensure proper maintenance and functionality of the equipment.
Manual Overview
The Bk MANUAL for Model 2120 focuses on troubleshooting, diagnostics, calibration, and board-level guidance for technicians. It emphasizes safety precautions due to the inherent risks of electrical shock when working with test equipment. The manual advises on minimizing exposure to high voltage and using isolation transformers for “hot chassis” equipment to prevent shock hazards. For troubleshooting, the manual provides a detailed flow for identifying issues, including the use of error codes and diagnostics. Calibration and adjustments are covered, with instructions on using the built-in probe adjust square wave generator for probe compensation and ensuring accurate voltage and time measurements. The manual includes guidance on handling the dual trace features, triggering modes, and X-Y operation, with specific instructions for adjusting vertical and horizontal controls. Board-level guidance involves understanding the specifications of the CRT and vertical amplifiers, ensuring technicians can perform precise calibrations and repairs.
Quick Issues Covered
- Diagnose power-up failures in Model 2120 oscilloscopes.
- Identify error codes related to sweep and trigger issues.
- Use schematics for circuit tracing and troubleshooting.
Overview
The source provides information about the Model 2120, which is a dual trace oscilloscope with various features including two vertical input channels, selectable sweep modes, and a rectangular CRT with a large viewing area. It offers high sensitivity, calibrated voltage and time measurements, and X-Y operation capabilities. The manual covers safety precautions, operating instructions, maintenance, and specifications.
Specifications
- CRT:
- Type: Rectangular with internal graticule.
- Display Area: 8 x 10 div(i div = [ cm).
- Accelerating Voltage: 2kV.
- Phosphor: P31.
- VERTICAL AMPLIFIERS (CH 1 and CH 2)
- Sensitivity:
- HORIZONTAL AMPLIFIER
- (Input through channel 2 input)
- X-Y mode: switch selectable using X—Y switch.
- CH 1: Y axis.
- CH 2: X axis.
- Sensitivity: Same as vertical channel 2.
- Accuracy:
- Maximum Undistorted Amplitude:
- DC-to-20 MHz: 4 divisions.
- DC-to-10 MHz: 8 divisions.
Safety & Warnings
Normal use of test equipment exposes users to potential electrical shock hazards, especially when testing in areas with high voltage. To reduce risk, the manual advises:
1. Avoid unnecessary exposure to high voltage. Only remove housings and covers when needed.
2. Turn off equipment when making test connections in high-voltage circuits and discharge high-voltage capacitors after removing power.
3. Familiarize yourself with the equipment and its high voltage points, but be aware that high voltage may appear unexpectedly in defective equipment.
4. Use insulated floor material or a large, insulated floor mat, and ensure work surfaces are not damp or wet.
5. Employ the “one hand in the pocket” technique when handling an instrument probe to avoid creating a ground return path.
6. Only touch the insulated portion of a probe, never the exposed tip.
7. Remember that ac line voltage is often present in some power input circuits whenever equipment is connected to an ac outlet, even if turned off.
8. For “hot chassis” equipment, use an isolation transformer between the ac outlet and the equipment under test to prevent shock hazards and potential damage.
9. Never work alone; someone should be nearby to provide aid if necessary. Training in CPR is recommended.