BK Precision 1621A Instruction Manual (PDF)

The BK Precision instruction manual for models 1620A, 1621A, 1622A, 1623A, 1626A, and 1627A covers the setup, operation, and troubleshooting of DC regulated power supplies, including details on confirming supply range, precautions for terminal connections, and operating environment. It provides guidance on operation procedures such as stand-alone operation, serial and parallel connections, and includes maintenance instructions like main fuse replacement and calibration of voltage and current meters.

  • Brand: BK Precision
  • Model: 1621A
  • Type: manual
  • File size: 472.0 KB

Manual Overview

The BK Precision DC Regulated Power Supplies, models 1620A through 1627A, are designed for precise voltage and current regulation, suitable for laboratory, industrial, and telecommunication applications. These units offer both constant voltage and constant current modes with separate meters for monitoring. Troubleshooting involves confirming the supply range and ensuring proper connection of output terminals. The MASTER/SLAVE switch should be set correctly, and the unit must be used within specified ambient conditions to avoid overheating. Calibration procedures include voltage and current calibration, as well as voltmeter and ammeter alignment, ensuring accurate output readings. For board-level guidance, the manual emphasizes the importance of using the correct fuses and maintaining proper ventilation. Error diagnostics are not explicitly detailed, but the manual suggests ensuring all connections and settings are correct before operation. Serial and parallel configurations allow for increased output voltage and current, respectively, with specific instructions for setting up master-slave configurations.

Quick Issues Covered

  • Diagnose power-up failures with voltage and current calibration.
  • Resolve error codes using detailed panel explanations.
  • Use schematics for precise circuit tracing and troubleshooting.

Overview

The BK Precision models 1620A, 1621A, 1622A, 1623A, 1626A, and 1627A are DC regulated power supplies designed for high-quality serial control. These units can operate in constant voltage or constant current modes, with outputs adjustable from 0 to the rated values for each model. They feature separate voltage and current meters for simultaneous monitoring and allow for precise adjustments using coarse and fine knobs. The power supplies can be connected in series or parallel to increase output voltage or current, respectively. They are suitable for laboratory, industrial, field service, hobby, and telecommunication applications. The manual covers supply range confirmation, output terminal connection precautions, operating environment, panel explanations, operation procedures, and maintenance tasks such as fuse replacement and calibration.

Specifications

  • Voltage and current can be varied from 0 up to rated values
  • Separate voltage and current meters
  • Analog meters for 1620, 1622, 1626
  • 3-digit LED meters for 1621, 1623, 1627
  • Coarse and fine adjust knobs
  • Natural convection cooling system
  • Power consumption: Approximate 210 VA/W for 220V
  • Input voltage: 220V, 50Hz
  • Operating ambient temperature: 5 to 40°C
  • Dimensions: 205 x 115 x 270mm
  • Weight: Approximate 6Kgs for some models, Approximate 7.4Kgs for others
  • Input fuse: AC 100V, 110V, 120V 3AF; AC 220V, 230V, 240V 2AF
  • Internal fuse: 500mAF

Controls & Indicators

1. POWER SWITCH: Turns the power supply ON-OFF; the switch lights up when the unit is ON.
2. DC VOLTMETER: Indicates the present output voltage. (Analog meter for 1620, 1622, 1626 and LED meter for 1621, 1623, 1627)
7. VOLTAGE FINE ADJUST: Fine adjust knob for the output voltage in voltage mode.
8. CURRENT COARSE ADJUST: Coarse adjust knob for current limiting point and current value in constant current mode.

Installation / Setup

The source does not provide specific information on installation or setup highlights, including wiring, clearances, calibration, or prerequisites.

Operation

The source does not provide specific operation, modes, or basic usage steps for the DC regulated power supplies.

Safety & Warnings

The manual includes the following safety warnings and precautions:

1. The units must be used within their specified range. Before plugging into the AC supply outlet, check whether the input rating conforms with your local supply. For certain models, a voltage selector is available, and it should be switched to the appropriate position before use.

2. The power supply is a floating type. For ordinary use, ensure that the MASTER/SLAVE switch on the rear panel is set to the MASTER position and either the (+) output terminal or the (-) terminal is connected to the GND terminal (chassis GND) via the shorting bar.

3. The unit should be used within the specified ambient temperature range listed in the specification table.

4. Since the unit is cooled by natural convection, do not place objects on top to block the convection. Avoid placing the unit on or near any heat-emitting devices or using multiple units in a stacked configuration. For best results, use the unit in an environment that is as well cross-ventilated as possible.

Download PDF (472.0 KB)

Leave a Comment