BK Precision 162 Instruction Service Manual (PDF)

The B&K Model 162 Transistor/FET Tester manual provides detailed instructions for setting up, operating, and troubleshooting the device, which is designed to test conventional (bipolar) and field effect transistors, as well as diodes, SCRs, UJTs, and Triacs both in-circuit and out-of-circuit. It includes guidelines for classifying semiconductor devices, setting test currents, calibrating tests, measuring leakage, and determining common failures, with a focus on ensuring safety and accuracy during testing procedures.

  • Brand: BK Precision
  • Model: 162
  • Type: service manual
  • File size: 8.2 MB

Manual Overview

The B&K Model 162 Transistor/FET Tester is designed for quick testing of conventional bipolar transistors and field effect transistors (FETs), both in-circuit and out-of-circuit. It also tests diodes, SCRs, unijunction transistors, and Triacs. The tester operates on batteries and is safe for use with equipment turned off, with no internal high voltage present. Troubleshooting involves checking large power devices first due to their heat dissipation properties, followed by input and output devices, which are more prone to external damage. The tester simplifies the process by focusing on key tests for gain and leakage measurements, which are sufficient to determine the condition of a device without needing detailed specifications. Calibration and adjustments are straightforward, with settings for test current, beta calibration, and leakage measurements. The tester includes color-coded jacks and leads, and integral sockets for bipolar and FET transistors, facilitating easy board-level diagnostics.

Quick Issues Covered

  • Diagnose power-up failures with Model 162 Transistor/FET Tester.
  • Calibrate beta test for accurate transistor classification.
  • Use schematics for effective circuit tracing and device testing.

Overview

The B&K Model 162 Transistor/FET Tester is designed to quickly test both conventional (bipolar) transistors and field effect transistors (FETs) in-circuit and out-of-circuit using a simple testing procedure. It also tests diodes, SCRs, UJTs, and Triacs, providing a fast and simple method for detecting faulty solid-state elements in various electronic products. The tester is battery-operated, has no internal high voltage, and all tests are conducted with the equipment under test turned off for safety.

Specifications

  • Tests conventional (bipolar) and field effect transistors.
  • Tests in-circuit and out-of-circuit with same technique.
  • Tests diodes, unijunctions, SCRs and Triacs.
  • Collector current: 100 microamperes to 1 ampere in steps of 10.
  • Collector voltage: 1.5 volts DC.
  • Beta: 1 to 50, 10 to 500, 100 to 5000.
  • Leakage: 5 ranges: 0-100 µA, 0-1 mA, 0-10 mA, 0-100 mA, 0-1 Amp.
  • Measures: Icno, Icrs, Icro, Tass, Inss, Beta, Gm (Gm: 0 to 50,000 µmhos).
  • Color-coded jacks and test leads.
  • Integral bipolar and FET transistor sockets.
  • Weight: 6 lbs. 4 oz. with batteries.
  • Rugged steel case: 9” wide, 7 1/4” high, 4” deep.
  • High sensitivity, 4 3/4 inch meter.
  • Batteries included (Type D; 1.5 Volts—Alkaline recommended).

Download PDF (8.2 MB)

Leave a Comment