BK Precision 1511 Instruction Manual (PDF)

The manual for the Bk MANUAL 1511 provides instructions for setting up and operating the power supply by plugging it into an AC outlet, turning on the power switch, and using control knobs to adjust the output voltage. It also includes specifications for troubleshooting, such as output voltage ranges, current protection, and meter accuracy.

  • Brand: BK Precision
  • Model: 1511
  • Type: manual
  • File size: 7.4 KB

Manual Overview

The Bk MANUAL provides detailed instructions for operating and troubleshooting the model 1511 power supply. For troubleshooting, the manual emphasizes a flow that begins with verifying the power connection and ensuring the device is plugged into a proper AC outlet. If the unit fails to power on, technicians should check the 3A fuse for continuity. Error codes are not specified, but diagnostics involve checking output voltages against expected ranges: 0-20VDC, 0-80VDC, and 0-500VDC, with specific attention to ripple and noise levels at 50mVrms. Calibration involves adjusting control knobs to achieve desired output voltages, ensuring meter accuracy within ±1% + 1 digit. For board-level guidance, technicians are advised to inspect for any visible damage or loose connections, particularly if output voltages exceed specified maximums under no-load or full-load conditions. Adjustments should be made carefully to maintain the integrity of the load and line voltage regulations, both set at 2.5V. The manual stresses maintaining environmental conditions at 25°C for optimal performance.

Quick Issues Covered

  • Diagnose power-up failures by checking fuse and input voltage.
  • Adjust output voltage using control knobs for precise calibration.
  • Identify error codes related to voltage regulation and ripple issues.

Specifications

  • 1511
  • 0-20VDC, 5A
  • 0-80VDC, 10mA
  • 0-SO0VDC, 10mA
  • AC LAV, 2.2V,3.3V,4.4V,5.5V,6.6V 2A
  • INPUT VOLTAGE: LISVAC, 60Hz
  • ENVIRONMENTAL TEMPERATURE: 25°C
  • 0-20VDC: Min. Max.
  • Output Voltage Range 1V 20V
  • Minimum Output Voltage Range 0.8V, typical 1V
  • Maximum Output Voltage 20.5V 22.5V
  • Output Current SA
  • Protection Current (start point) 5A 8A
  • Load Voltage Regulation (0- 100% load) 2.5V
  • Line Voltage Regulation (100-130VAC Variation) 2.5V
  • Ripple & Noise 50mVrms
  • 0-80VDC:
  • Max. Output Voltage No Load 90V 120V
  • Max. Output Voltage Full Load 80V 100V
  • Output Current 10mA, typical
  • 0-S00VDC:
  • Max. Output Voltage No Load 600V 800V
  • Max. Output Voltage Full Load S00V
  • Output Current 10mA, typical
  • AC Output Voltage 1 1V 1.4V
  • AC Output Voltage 2 2.1V 2.5V
  • AC Output Voltage 3 3.2V 3.6V
  • AC Output Voltage 4 4.2V SV
  • AC Output Voltage 5 5.3V 6.1V
  • AC Output Voltage 6 6.3V 7.5V
  • No Load Input Current 160mA
  • Full load Input Current 1.5A
  • Meter Accuracy:
  • Voltmeter +- 1%+1 digit
  • Ammeter +- 1%+1 digit
  • Fuse 3Amps
  • Dimensions (W X D X H): 258 mm x 216 mm x 108 mm
  • Weight: 5.80 kgs

Operation

Plug model 1511 into AC outlet. Turn power switch on. Select desired voltage, use control knobs to adjust output.

Download PDF (7.4 KB)

Leave a Comment