The service manual for the B&K Precision Dual-Trace Oscilloscope provides detailed instructions on setting up, operating, and troubleshooting the Model 1474, 1479, 1479A, and 1479B oscilloscopes. It includes safety precautions for handling high voltage, descriptions of controls and indicators, circuit descriptions, and maintenance procedures.
Manual Overview
The service manual for the B&K Precision Dual-Trace Oscilloscope models 1474, 1479, 1479A, and 1479B provides comprehensive guidance for qualified technicians. It emphasizes the importance of safety due to the presence of high voltage, up to 6000 volts, during operation and servicing. The manual includes detailed troubleshooting flows and error diagnostics to assist in identifying and resolving issues efficiently. Calibration and adjustments are covered, ensuring the oscilloscope maintains accuracy and reliability. The manual also provides board-level guidance, detailing the circuit descriptions for vertical and horizontal sweeps, trigger circuits, and power supplies. Technicians are advised to use insulated materials and follow safety precautions to prevent electrical shock. The manual includes instructions for disassembly, fuse replacement, and voltage conversion, ensuring that technicians can perform necessary maintenance and repairs while minimizing risks.
Quick Issues Covered
- Diagnose power-up failures with detailed troubleshooting steps.
- Identify and resolve error codes specific to Model 1479B.
- Use schematics for effective circuit tracing and diagnostics.
Overview
The service manual is for the Model 1474, 1479, 1479A, and 1479B 30 MHz Triggered Sweep Dual-Trace Oscilloscope by MAXTEC International Corp. It includes safety warnings related to high voltage exposure, specifications, accessories, controls and indicators, circuit descriptions, operator maintenance, and service instructions.
Safety & Warnings
Normal use and servicing of test equipment, such as the dual-trace oscilloscope, expose users to electrical shock risks due to the presence of high voltage. A current of 10 milliamps through the heart can be fatal, and voltages as low as 35 volts can be hazardous. High voltage up to 6000 volts is present when servicing the oscilloscope, and precautions should be taken when the unit is operating with the case removed. High voltage charges may be retained indefinitely, especially at the CRT socket and anode cap. It is important to discharge high voltage capacitors with a grounded test lead after removing power.
Avoid unnecessary exposure to high voltage by removing housings and covers only when necessary, and ensure the equipment is turned off while making test connections in high-voltage circuits. Familiarize yourself with the equipment and the location of high voltage points, but be aware that high voltage may appear unexpectedly in defective equipment. Use insulated floor materials or mats, and an insulated work surface to prevent contact with high voltage. Employ the “one hand in the pocket” technique to avoid creating a ground return path through your body.
The oscilloscope’s ground wire places the chassis and housing at earth ground, and defeating this connection or floating the oscilloscope can pose a safety hazard. When using a probe, touch only the insulated portion and never the exposed tip. Remember that AC line voltage is present on some power input circuits whenever the equipment is connected to an AC outlet, even if turned off.
This service manual is intended for qualified electronics technicians only, and servicing should not be performed unless qualified to do so to avoid electric shock.