BK Precision 1471 Instruction Maintenance Manual (PDF)

The manual for the B&K Precision Model 1471 Dual-Trace Oscilloscope provides detailed instructions on setup, operation, and troubleshooting, including initial starting procedures, waveform observation, and calibration adjustments. It also covers applications such as television servicing, frequency measurement, and phase measurement, ensuring users can effectively utilize the oscilloscope for various electronic circuit analyses.

  • Brand: BK Precision
  • Model: 1471
  • Type: manual
  • File size: 5.7 MB

Manual Overview

The B&K Precision Model 1471 Dual-Trace Oscilloscope manual provides detailed instructions for technicians on troubleshooting, diagnostics, calibration, and adjustments. The oscilloscope features dual vertical inputs for simultaneous waveform observation, with a 10 MHz bandwidth and a range of sweep speeds. Troubleshooting is facilitated through a comprehensive set of error codes and diagnostics, which help identify and resolve issues quickly. Calibration adjustments include CH1 and CH2 DC balance, attenuator balance, vertical gain, and horizontal position adjustments, ensuring accurate measurements. The manual also provides board-level guidance, detailing the circuit description and operation of vertical preamplifiers, trigger circuits, and sync amplifiers. The oscilloscope’s triggered sweep capability ensures stable waveform presentations, while the built-in calibration source allows for easy verification and recalibration of vertical amplifiers. The manual emphasizes the importance of proper calibration and adjustment to maintain the oscilloscope’s performance and reliability in various applications, including television servicing and digital circuit analysis.

Quick Issues Covered

  • Diagnose power-up failures with initial starting procedure guidance.
  • Resolve calibration issues with CH1 and CH2 DC balance adjustments.
  • Trace circuits using detailed schematics for vertical amplifiers.

Overview

The B & K-Precision Model 1471 is a dual-trace oscilloscope designed for laboratory-quality waveform observation and measurement in electronic circuits. It features a 10 MHz bandwidth, a wide range of sweep speeds, and high sensitivity, making it suitable for various applications such as troubleshooting, repairing electronic equipment, research and development, and laboratory instruction. The oscilloscope includes dual vertical inputs for simultaneous viewing of two waveforms, and it uses a triggered sweep system to ensure waveform synchronization. The manual covers the introduction, features, specifications, operator’s controls, operating instructions, dual-trace and single-trace applications, television alignment, FM receiver alignment, phase measurement, square wave testing of amplifiers, circuit description, calibration adjustments, and warranty instructions.

Specifications

  • Deflection Factor: 0.01 V/cm to 20 V/cm
  • Calibration Accuracy: ±5% on all ranges
  • Frequency Response: DC to 10 MHz (-3 dB)
  • Rise time: 35 nanoseconds
  • Overshoot: 3% or less at 100 kHz square wave display
  • Ringing: 3% or less at 100 kHz square wave display
  • Input Resistance: 1 megohm, ±5%
  • Input Capacity: 22 pF (±3 pF)
  • Max. Input Voltage: 300 V (DC + AC peak) or 600 V p-p
  • Chop Frequency: 200 kHz (±20%)
  • Channel Separation: Better than 60 dB @ 1 kHz
  • Sweep System: Triggered and automatic
  • Sweep Time: 1 µSEC/cm to 0.5 SEC/cm in 18 calibrated ranges
  • Sweep Time Accuracy: ±5%
  • Sweep Magnification: Obtained by enlarging the above sweep 5 times from center
  • Horizontal Linearity: 3% or less distortion
  • Voltage: TTL logic-compatible
  • Input Resistance: 470 kΩ (nominal)
  • Input: 117 or 230 VAC, ±11%, 50/60 Hz, 20 watts

Download PDF (5.7 MB)

Leave a Comment