BK Precision 1249A Instruction Manual (PDF)

The B & K-Precision Model 1249A NTSC Generator manual covers the setup and operation of the device, which generates various test signals and patterns for testing and adjusting video and television equipment, including NTSC color bars, staircase patterns, and convergence patterns. It also provides troubleshooting guidance, emphasizing safety precautions to prevent electrical shock when using the generator with high-voltage equipment.

  • Brand: BK Precision
  • Model: 1249A
  • Type: manual
  • File size: 2.3 MB

Manual Overview

The B&K-Precision Model 1249A NTSC Generator is a versatile tool designed for testing and servicing video and television equipment. It provides a range of test signals and patterns, including NTSC color bars, staircase, black raster, and convergence patterns. These patterns are available as composite video signals or modulated RF outputs on channel 3, channel 4, or the standard television IF frequency of 45.75 MHz, allowing for signal injection at various points in the equipment. The generator features separate RGB and sync outputs for compatibility with most computer and video monitors using standard 525 line, 15.750 kHz scan. Signal levels at the RGB outputs can be switched between TTL and low (0.8 V). The device also includes a crystal-generated 30 Hz TTL output and a switchable 4.5 MHz sound sub-carrier modulated with a 1 kHz audio tone, useful for isolating servo problems in video cassette recorders and checking sound circuits. Safety precautions are emphasized, especially when working with high voltage equipment. Calibration and maintenance instructions are provided to ensure optimal performance.

Quick Issues Covered

  • Diagnose NTSC Generator power-up failures and initialization issues.
  • Troubleshoot error codes related to RGB output and sync signals.
  • Use schematics for circuit tracing and component-level diagnostics.

Safety & Warnings

Normal use of the NTSC Generator exposes users to potential electrical shock hazards, especially when testing equipment with high voltage. A shock causing 10 milliamps of current through the heart can be fatal, and voltages as low as 35 volts can be dangerous. To minimize risks, users should:

1. Connect the NTSC Generator’s power cord to a 3-wire outlet to ensure the instrument’s chassis and ground leads are at earth ground.
2. Avoid unnecessary exposure to high voltage in the equipment under test. Remove housings and covers only when necessary, and turn off equipment while making test connections near high-voltage circuits. Discharge high-voltage capacitors after removing power.
3. Familiarize themselves with the equipment being tested and the location of high voltage points, but remember that high voltage may appear unexpectedly in defective equipment.
4. Use insulated floor material or a large, insulated floor mat to stand on, and an insulated work surface for equipment, ensuring these surfaces are not damp or wet.
5. Use the “one hand in the pocket” technique while handling an instrument probe to avoid providing a ground return path through the body.
6. Be cautious when testing video equipment with picture tubes or CRTs, as these can operate at very high voltages, often 20,000 volts or more, and may retain a high voltage charge even after being turned off.

Download PDF (2.3 MB)

Leave a Comment