BK Precision 1201SR Instruction Manual (PDF)

The B&K Precision Model 1201SR TV Modulator/Converter manual provides detailed instructions for setting up and operating the device, including selecting channels and input sources, as well as troubleshooting common issues such as fuse replacement and line voltage modification. It also includes specifications for the device's output frequencies and input requirements, ensuring users can effectively generate and convert modulated carrier frequencies for testing TV tuners and verifying channel assignments.

  • Brand: BK Precision
  • Model: 1201SR
  • Type: manual
  • File size: 269.5 KB

Manual Overview

The B&K Precision Model 1201SR TV Modulator/Converter is designed for generating modulated carrier frequencies across all U.S. VHF broadcast and CATV channels. It functions as both a modulator and a converter, allowing users to either modulate a carrier with a composite video source or convert a channel 3 RF carrier to another frequency. The unit features frequency-synthesis techniques for precise channel accuracy, making it suitable for testing tuners and verifying channel assignments in cable-ready TVs and VCRs. Troubleshooting involves checking connections and ensuring the correct input source is selected. Error diagnostics are not explicitly detailed, but users should ensure the EXT VIDEO switch is engaged when using the VIDEO IN jack. Calibration involves using the push-button controls to select the desired channel and band, with the LED display indicating the current settings. Board-level guidance is not provided, but users should ensure proper input levels and connections to avoid signal distortion. The device operates on various AC voltages and requires minimal power, making it versatile for different setups.

Quick Issues Covered

  • Diagnose channel selection issues with pushbutton controls.
  • Identify power-up failures using the power switch.
  • Calibrate frequency accuracy with frequency-synthesis techniques.

Overview

The B & K-Precision Model 1201SR TV Modulator/Converter is designed to generate modulated carrier frequencies across all U.S. VHF broadcast and CATV channels. It can function as a modulator, using a user’s composite video source, or as a converter, altering an already-modulated channel 3 RF carrier to another frequency. The device uses frequency-synthesis techniques for precise channel accuracy and is suitable for testing tuners and verifying channel assignments on cable-ready TVs and VCRs. The unit features a clean front panel layout with push-button channel selection for ease of use.

Specifications

  • BAND AND CHANNEL SELECTION
  • Band Pushbutton switches for STD TV, STD CATV, HRC CATV, and ICC CATV band selection.
  • Channel Readout LED digital display.
  • Channel Selection X10 pushbutton Advances tens digit with each push, or hold to scroll
  • X1 pushbutton Advances units digit with each push, or hold to scroll
  • UP/DOWN pushbuttons Increase or decrease channel selection by one channel with each push
  • RESET switch Resets to CH 2.
  • VIDEO INPUT
  • Video Bandwidth 15 Hz to 4.2 MHz
  • Level 1 Volt peak-to-peak
  • Polarity Positive (negative syne)
  • Input Impedance 75 ohms
  • RF INPUT
  • Frequency Channel 3 (61.25 MHz)
  • Input Level 60 mV p-p maximum
  • OUTPUT
  • Frequency Coverage U.S. VHF TV and CATV Channel video carrier frequencies
  • Channel Frequency Accuracy Using CH 3 Input: +50 PPM + accuracy of channel 3 input signal
  • Using Video Input: +50 PPM +£0.008 MHz
  • Impedance 75 ohms
  • MISCELLANEOUS:
  • Power Requirements ‘100, 120, 220, 240 VAC +10%, 50/60 Hz, 21 watts (when wired for 120 VAC).
  • Operating Temperature 0 to +45°C
  • Dimensions (HxWxD) 3.5 x 9 x 10.5" (89 x 230 x 270 mm) less handle.
  • Weight 3.5 Ibs (1.59 kg)

Controls & Indicators

The front-panel controls and indicators for the Model 1201SR TV Modulator/Converter are as follows:

1. POWER Switch: Turns the unit on or off.
2. EXT VIDEO Switch: Enables the VIDEO IN jack. When pushed in, a composite video signal connected to VIDEO IN is used to modulate the output carrier.
3. BAND Switches: Used to select one of four groups of frequencies associated with the displayed CHANNEL. The BAND indicator shows which band is selected.
4. X10 Switch: Increments the tens digit of the CHANNEL display. Push for a single increment, hold for scroll.
5. X1 Switch: Increments the units digit of the CHANNEL display. Push for a single increment, hold for scroll. Does not affect the tens digit.
6. DOWN Switch: Decrements the CHANNEL display. Push for a single decrement. Automatically decrements the tens digit when the units digit changes from “0” to “9”.
7. VIDEO IN Jack: Input for standard composite video source. Enabled when EXT VIDEO switch is pushed in.
8. CH3 IN 0 dB Jack: Input for channel 3 (61.25 MHz) RF source with no attenuation.
9. CH3 IN -20 dB Jack: Input for channel 3 (61.25 MHz) RF source with -20 dB attenuation.
10. OUTPUT Jack: Provides the output signal.
11. RESET Switch: Resets the CHANNEL display to channel 2.
12. UP Switch: Increments the CHANNEL display. Push for a single increment. Automatically increments the tens digit when the units digit changes from “9” to “0”.
13. CHANNEL Display: Shows the current channel.
14. BAND Display: Indicates the frequency band currently selected by the BAND switches.
15. EXT VIDEO Indicator: Lights when the VIDEO IN jack is enabled (EXT VIDEO switch pushed in).

Safety & Warnings

To prevent personal injury, observe the “TEST INSTRUMENT SAFETY” precautions on the inside front cover of the manual.

Download PDF (269.5 KB)

Leave a Comment