The B&K Model 1076 Television Analyst manual covers the setup and operation of the device, which serves as a signal generating source for troubleshooting TV receivers by injecting signals into various stages, including video, audio, and sync circuits. It also provides detailed instructions for troubleshooting different TV components such as sweep circuits, sync amplifiers, and chroma circuits, and includes features like a 400 cycle audio tone signal, vertical and horizontal driving pulses, and a high level A.G.C. keying pulse.
Manual Overview
The Model 1076 Television Analyst is a versatile tool designed for troubleshooting and calibrating television receivers. It provides a range of signal generating capabilities for point-to-point signal injection, enabling technicians to diagnose issues in various TV sections, including R.F., I.F., video, and audio stages. The device supplies test patterns and modulated signals for thorough testing of video and audio circuits. It includes features for troubleshooting sweep and sync circuits, offering vertical and horizontal driving pulses, composite sync signals, and vertical yoke test signals. The Analyst also provides indicators for B+ boost and high voltage, along with sensitive tests for leakage and continuity in horizontal output transformers and yokes. Calibration is facilitated through controls for shorted turns testing and leakage continuity. The device’s output jacks allow for connection to video, sync, color, and audio circuits, with adjustable controls for video polarity, sync amplitude, and frequency tuning. These features make the Model 1076 a comprehensive tool for diagnosing and adjusting TV receiver performance.
Quick Issues Covered
- Diagnoses sync circuit issues with adjustable composite sync signals.
- Troubleshoots vertical yoke defects with dedicated test signals.
- Includes schematics for circuit tracing and repair guidance.
Overview
The Model 1076 Television Analyst is a versatile piece of equipment designed for troubleshooting and testing television receivers. It functions as a signal generating source, providing R.F. and I.F. signals for troubleshooting TV receiver sections. It offers a variety of features, including test patterns for video stages, audio tone signals, and synchronizing signals for sync circuits. The device also includes capabilities for testing vertical and horizontal circuits, checking R.F. sensitivity, and adjusting linearity and aspect ratio of TV receivers. Additionally, it can be used for color TV convergence adjustments and as a stable signal source for troubleshooting intermittents. The manual covers the operation, troubleshooting techniques, and various uses of the Television Analyst.
Specifications
- Model 1076 Television Analyst
- Signal generating source
- Supplies R.F. and I.F. signals
- Test pattern at video
- 4.5 mc sound channel
- 400 cycle audio tone signal
- Vertical and horizontal driving pulses
- Composite synchronizing signals
- Vertical output stage plate drive signal
- Vertical yoke test signal
- Horizontal driving signal
- B+ boost indicator
- Hi-voltage indicator
- Sensitive leakage and continuity test
- High level A.G.C. keying pulse
- High level test signal
- Calibrated low impedance negative bias supply
- White dot and cross-hatch generator
- Generates color rainbow pattern and color bar pattern
- Test pattern for bandwidth, resolution, shading, contrast
- Checks R.F. sensitivity and A.G.C. settings
- Checks and adjusts linearity, size, aspect ratio
- Stable signal source
- Reproduces 8” x 4” positive transparency
- Advertising medium
- Transmitter for paging systems
- Checks performance of antenna systems
Controls & Indicators
The main operating controls on the front panel of the Model 1076 Television Analyst include:
1. POWER SWITCH: Labeled Off-Stby-On, it allows the unit to be kept ready using the Stand-by position to keep the tubes hot while preventing signal radiation. The pilot light illuminates in either the “Stby” or “On” position.
2. R.F.- I.F. SELECTOR SWITCH: Tunes the Television Analyst to channels 2 through 6, 7, 8, 12, or 13, and transmits on I.F. when switched to the I.F. position. Both R.F. and I.F. frequency generators are off in the “Off” position.
3. I.F. TUNING: Tunes any I.F. frequency between 20 mc and 48 mc.
4. VIDEO CONTROL: Determines the amount of video or contrast of the picture.
5. HORIZONTAL CONTROL: A fine frequency adjustment of the horizontal oscillator circuit.
6. VIDEO POLARITY (+ or -) SWITCH: Determines whether the video output signal will have positive or negative polarity.
7. SYNC AMPLITUDE CONTROL: Adjusts the amplitude and phase of the sync signal.