The manual for the BK Precision Models 2120B and 2125A 30 MHz Dual-Trace Oscilloscopes covers setup, operation, and troubleshooting, including safety precautions, control descriptions, and maintenance procedures. It provides detailed instructions on operating features such as dual trace display, triggering, and sweep operations, as well as guidance on calibration checks and fuse replacement.
Manual Overview
The manual for the BK Precision Models 2120B and 2125A 30 MHz Dual-Trace Oscilloscopes provides detailed guidance on troubleshooting, error diagnostics, calibration, and board-level adjustments. Troubleshooting involves following a systematic flow to identify and resolve issues, with emphasis on understanding error codes and diagnostic indicators. Calibration and adjustments are crucial for maintaining accuracy, with procedures outlined for periodic checks and adjustments, including voltage and time measurements. The manual provides board-level guidance for maintaining and repairing the oscilloscopes, including fuse replacement and line voltage selection. Safety precautions are emphasized to prevent electrical shock, especially when working with high voltage. The manual advises using isolation transformers for “hot chassis” equipment and recommends always having a second person present when working with potentially dangerous voltages. Regular maintenance and calibration checks are necessary to ensure optimal performance and safety.
Quick Issues Covered
- Diagnose power-up failures with initial starting procedure guidelines.
- Identify error codes using calibration check instructions.
- Trace circuits with detailed schematics for effective troubleshooting.
Overview
BK Precision’s Models 2120B and 2125A are 30 MHz dual-trace oscilloscopes. These entry-level oscilloscopes are economically priced yet offer higher performance compared to competitors, featuring a 30 MHz bandwidth as opposed to the typical 20 MHz. The manual covers test instrument safety, features, specifications, controls and indicators, operating instructions, maintenance, and additional appendices.
Safety & Warnings
Normal use of test equipment exposes users to potential electrical shock hazards, especially when testing in areas with exposed high voltage. Electrical shock can be lethal, with as little as 35 volts dc or ac rms being dangerous. To reduce risk, users should:
– Avoid unnecessary exposure to high voltage by removing housings and covers only when needed.
– Turn off equipment before making test connections in high-voltage circuits and discharge high-voltage capacitors after power removal.
– Familiarize themselves with the equipment and location of high voltage points, but be aware that high voltage may appear unexpectedly in defective equipment.
– Use insulated floor material or a large, insulated floor mat and an insulated work surface, ensuring they are not damp or wet.
– Employ the “one hand in the pocket” technique while handling an instrument probe to avoid creating a ground return path.
– Touch only the insulated portion of a probe, never the exposed tip.
– Remember that ac line voltage is often present in power input circuits even if the equipment is turned off.
– Treat all two-wire ac powered equipment as “hot chassis” unless certain it has an isolated or earth ground chassis, and use an isolation transformer for measurements.
– Never work alone and have someone nearby to provide aid if necessary. Training in CPR and first aid is recommended.