The manual for the B&K Precision Model 1823 Universal Counter provides detailed instructions on setup, operation, and troubleshooting, covering aspects such as frequency, period, and time interval measurements, as well as the use of various operating modes and signal conditioning controls. It also includes guidance on maintenance tasks like fuse replacement and line voltage conversion, along with a self-test mode for checking instrument functionality.
Manual Overview
The BK Precision Model 1823 Universal Counter manual focuses on troubleshooting, error codes, calibration, and board-level guidance. The troubleshooting section emphasizes a self-test mode for quick checks of instrument functionality, which is crucial for diagnosing operational issues. Error codes and diagnostics are not explicitly detailed in the provided source, but the manual suggests using the self-test mode for initial diagnostics. Calibration and adjustments are covered under maintenance, with specific instructions for fuse replacement and line voltage conversion to ensure accurate measurements. The manual provides detailed guidance on adjustments, including selectable trigger slopes, adjustable trigger levels, and the use of a low-pass filter for signal conditioning to prevent miscounts due to noise. Board-level guidance includes a schematic and block diagram analysis, which are essential for understanding the internal circuitry and making precise adjustments. The manual also highlights the use of external time bases and the importance of maintaining the internal crystal-controlled oscillator for optimal performance.
Quick Issues Covered
- Diagnose power-up failures with self-test mode for quick checks.
- Error codes for frequency and period measurement inaccuracies.
- Schematic diagram analysis aids in circuit tracing and troubleshooting.
Overview
The B&K-Precision Model 1823 Universal Counter is a high-quality, lightweight instrument capable of frequency measurements from 5 Hz to 175 MHz. It features an eight-digit display with up to 0.1 Hz resolution below 10 MHz and 1 Hz resolution up to 175 MHz. The counter offers various operating modes, including period, frequency ratio, and time interval measurements, with selectable resolution through a front panel switch. It provides easy-to-read displays with automatic decimal point placement and LED indicators. The counter includes signal conditioning controls to prevent mis-counting due to input noise, and a self-test mode for quick operational checks. The internal 10 MHz time base is crystal controlled for stability, and an external reference oscillator can be used for improved accuracy. The Model 1823 is suitable for scientists, engineers, and technicians due to its accuracy, sensitivity, and versatility.
Specifications
- Frequency Range: 5 Hz to 175 MHz
- Display: 8 Digits, 0.56” High
- Dual Input
- 2-Position Attenuator (Ch. A & Ch. B)
- Selectable Trigger Slope (Ch. A & Ch. B)
- Adjustable Trigger Level (Ch. A)
- Low Pass Filter (Ch. A)
- External Time Base Input
- Accuracy: +1 count + time base error
- Resolution: 0.1 Hz to 1 kHz, in decade steps
- Minimum Pulse Width: 250 ns
- Gate Times: 10 ms, 100 ms, 1 s, or 10 s
- Impedance: 1 MΩ, <40 pF
- Maximum input: 200 V peak
- Internal Frequency: 10 MHz
- Line Voltage Stability: <1 ppm with ±10% line voltage variation
- Temperature Stability: <10 ppm, 0°C to 50°C
- Maximum aging rate: ±10 ppm/yr
Controls & Indicators
The front panel of the Model 1823 Universal Counter includes pushbutton switches for selecting operating modes and resolution, a HOLD switch to freeze the display, and a RESET button to clear the counter display and initiate a new measurement. It also features indicators for overrange and GATE function, and provides easy-to-interpret readouts with large bright digits, automatic decimal point placement, leading zero blanking, and LED display of proper measurement units. Signal conditioning controls include edge selectors, selectable X 10 attenuators, a 10kHz low-pass filter, and a variable trigger threshold control for Channel A.
I would like to buy three 1823B counters but I can’t find a calibration manual for that model. Is there one for 1823B?