HONEYWELL-LOGO

VisionPRO 8000 WiFi Programmable Thermostat

HONEYWEL-LVisionPRO-8000-WiFi-Programmable-Thermosta-PRODUCT

VisionPRO 8000 WiFi Programmable Thermostat

TH8321WF1001/U

Installation Guide [pdf]: VisionPRO 8000 Smart TH8321WF1001 Installation Guide

Product Information [pdf]: VisionPRO 8000 Series

TH8320WF
TH8320WF VisionPRO Wi-Fi 8000 User Manual

RTH8580WF
RTH8580WF VisionPRO Wi-Fi 8000 User Guide

TH8321WF
TH8321WF VisionPRO Wi-Fi 8000 User Guide

What are the features on my RTH8500WF WiFi Series WiFi Touchscreen Programmable Thermostat?

The user guide for each thermostat has the full list of features / functions.

TH8320WF
TH8320WF VisionPRO Wi-Fi 8000 User Manual

RTH8580WF
RTH8580WF VisionPRO Wi-Fi 8000 User Guide

TH8321WF
TH8321WF VisionPRO Wi-Fi 8000 User Guide

How do I connect my RTH8500WF WiFi Series WiFi Touchscreen Programmable Thermostat to WiFi and register it?

Connecting your thermostat to Wi-Fi can be performed during the initial setup and configuration, or later at a time you choose.

Connecting to Wi-Fi – Initial Setup:

After the Configuration step during the initial install, you will be prompted to connect your VisionPRO Wi-Fi 8000 to your Home Wi-Fi.

The VisionPRO Wi-Fi 8000 (TH8321WF) can be connected to Wi-Fi on the thermostat itself after initial setup / configuration, or from the Menu > Wi-Fi Setup screen. After successful connection, register your product on the mytotalconnectcomfort.com/portal website to complete the process and control the thermostat remotely.

The VisionPRO Wi-Fi 8000 (RTH8580WF / TH8320WF) uses a 3-step connection and registration process

Step 1 – Connect your mobile device to the thermostat’s Wi-Fi network (NewThermostatxxxxxx)

Step 2 – Connect the thermostat to your home Wi-Fi (via an internet browser on your mobile device)

Step 3 – Register in the My Total Connect Comfort web portal

*Registration cannot be performed with the mobile app, currently only supported via the web portal*

Step 1 – Connecting your mobile device to the thermostat’s Wi-Fi network (NewThermostatxxxxxx)

Once installed and configured, the (TH8320WF / RTH8580WF) thermostat will display “Wi-Fi Setup”. Open the Settings – Wi-Fi on your mobile device and connect to the Wi-Fi network named “NewThermostatxxxxxx”.

*If your thermostat does not display Wi-Fi Setup remove the thermostat faceplate from the wall plate for 30 seconds and then reattach it. If Wi-Fi setup does not display, enter the Installer Setup (press the System button, then hold the center blank box at the bottom of the thermostat display for 5-10 seconds until the screen changes) and use the User / Installation Guide to navigate the settings to function 0890 . Make sure function 0890 is set to 1, then proceed to function 0900. Use the up or down arrow to change function 0900 function to 0 then press done. WiFi setup will then be displayed on the screen. Return to step 1.*

**TH8321WF – After initial configuration, you will be prompted to connect to WiFi. Select your Home Wi-Fi network, then enter the password on your thermostat screen**

Step 2 – Connect the thermostat to your home Wi-Fi (via an internet browser on your mobile device)

Skip this step for the TH8321WF.

TH8320WF / RTH8580WF – After connecting to the thermostat Wi-Fi, open a web browser (Safari, Chrome, etc.) You should be automatically guided to a page labeled “Thermostat Wi-Fi Setup. If you are not automatically guided there, enter the IP address: 192.168.1.1 into the address bar on your browser to navigate there manually.

You should see your Home Wi-Fi network listed. Select it and enter your Wi-Fi password. After a brief connection period, your thermostat will display a “Connection Success” message. Reconnect your phone to your home wi-Fi network if your device does not reconnect automatically

*If you do not see your home Wi-Fi network, refresh the list. If your Wi-Fi network is still not displayed, check the Trouble Connecting? / Wi-Fi network recommendations below.*

Step 3 – Register at mytotalconnectcomfort.com/portal

Registration is completed at mytotalconnectcomfort.com/portal. Navigate to the page and create an account / login.

Select the “Add Device” icon and Input the MAC ID / CRC for your device. (MAC ID / CRC are located on your thermostat information card, on the back of the thermostat, or from the Menu > Equipment Status screen])

Complete the security check (if prompted) and follow the directions within the web portal to complete the registration.

My thermostat does not show “Sched” or “Hold” buttons. Why?

If the thermostat is set for operation as a non programmable unit then it will not show Sched or Hold in the display. To check how the thermostat has been set up, please refer to the owner’s manual under Advanced Functions and refer to feature 0160.

My thermostat shows humidity however I am unable to change it?

If the VisionPRO Thermostat does not allow you to change the humidity settings, then it is not setup for dehumidification or humidification control. In this case Honeywell recommends speaking to the installing contractor of the thermostat.

Why isn’t my thermostat connecting to my Wi-Fi router even though it is very close to the thermostat?

Please check a few steps first, in order to make sure that your router can be “seen” by your thermostat:

  1. Your router is powered and broadcasting the Wi-Fi signal in the 2.4GHz range.
  2. Your thermostat is not in a place with poor signal from the router. For example, most homes have “dead spots” where Wi-Fi signals are unreliable.
  3. Your thermostat “sees” and connects to the home network, not a guest network. If you must connect to your guest network, you will need to unblock port 443 in the guest network firewall.

Why is my thermostat’s Wi-Fi not working?

If your thermostat’s Wi-Fi isn’t working, the solution depends on what you’re experiencing.

What are you experiencing?

  • NEW THERMOSTAT, NEW INSTALLATION – This is for people who recently bought a new thermostat and are installing it for the first time. Continue to the New Thermostat, New Installation section.
  • OLD THERMOSTAT, NEW INSTALLATION – This is for people who have an existing thermostat but are moving it to a new location. Continue to the Old Thermostat, New Installation section.
  • LOST WI-FI ON APP/ THERMOSTAT – This is for people who have an existing thermostat that was working but has lost connection. Continue to the Lost Wi-Fi on App/Thermostat section.

New Thermostat, New Installation

1. Which app does your thermostat work with?

  • HONEYWELL HOME APP – Compatible thermostats include T-Series and Round Smart Thermostats. Continue to the Honeywell Home subsection.
  • TOTAL CONNECT COMFORT APP – Compatible thermostats include Wi-Fi FocusPRO, VisionPRO, Prestige and Wi-Fi programmable thermostats. Continue to the TCC subsection.

Honeywell Home

2. When did your Wi-Fi connection fail?

  • APP-THERMOSTAT PAIRING (connecting to the Lyric xxxxxx network, after clicking the “+” or “Add new device” button in the Honeywell Home mobile app) – To troubleshoot issues with pairing your app to your thermostat, continue to the App-Thermostat Pairing Issues subsection.
  • THERMOSTAT-NETWORKING PAIRING (after setting up the thermostat in the Honeywell Home app, and selecting my home network and entering my home wi-fi password) – To troubleshoot issues with pairing your Wi-Fi network to your thermostat, continue to the Thermostat-Network Pairing Issues subsection.
  • THERMOSTAT REGISTRATION – See the Registration Issues FAQ.

App-Thermostat Pairing Issues

3. Make sure your app is up to date, and your mobile phone is within 3-5 feet of your thermostat.

4. Make sure thermostat is broadcasting to your app.

In your app, you should see “Lyric XXXXXX” as an option to connect to.

5. Go to your phone’s settings and forget other networks. (This ensures the phone does not automatically “jump” back to a known wi-fi network, which can disrupt the connection process)

6. Is your app pairing with your thermostat now?

  • YES – Congratulations! You’ve fixed your Wi-Fi issue!
  • NO – Contact Support at 1-800-633-3991 or find a pro-installer in your area.

Thermostat-Network Pairing Issues

7. Turn off your mobile phone’s cellular/mobile data. (This ensures that the connection and registration app data goes to Honeywell / Resideo via the same route as thermostat data)

8. Turn on your mobile phone’s Wi-Fi.

Connect your phone to the same network that you’re connecting your thermostat to. (Typically, your home wi-fi network. If you are attempting to connect /register the thermostat via a mobile hotspot, your mobile phone and thermostat should connect to the same hotspot network)

9. Make sure the device you are connecting is on the same Wi-Fi network as the mobile device.

  • “Forget” all other networks, and turn off mobile data.
    OR
  • Turn on “Airplane Mode” and then turn on Wi-Fi and connect to the same Wi-Fi network the thermostat will be connected to.

10. Make sure the network is a standard home network and does not require logging in from a web page, such as a guest network or business network.

11. Make sure you’re connecting to a 2.4 gigahertz (GHz) network with its own network name. (Only the T9/T10 thermostats, C2 Camera, and Smart Home Security base station are compatible with 5GHz networks at this time)

  • This specifically speaks to “Dual Band” routers which support both 2.4 GHz and 5 GHz networks.
  • Many of these routers will allow you to configure separate Networks to connect to on your phone or computer.
  • These networks must be named discretely (HomeWiFi – 2.4 and HomeWiFi – 5) in order for Honeywell Home products to connect.

12. Make sure you’re connecting directly to a router, and not a router accessory.

Examples of router accessories include repeaters and signal boosters.

13. Make sure your router hasn’t reached its max number of devices.

Routers typically can only handle a specific number of devices. Refer to your router support or Internet Service Provider for assistance.

14. Make sure your router is using Dynamic Host Configuration Protocol (DHCP).

When a router is using DHCP, it automatically assigns internet protocol (IP) addresses to each device. Honeywell connected devices work best with DHCP.

15. Make sure your router isn’t using any advanced security settings such as after-market firewalls, or connected to any network device, such as a switch or gateway which may have its own security.

Make sure Wi-Fi network is using one of the following security protocols. Other security protocols are not recommended. • OPEN • WEP PSK • WPA TKIP PSK • WPA2 AES PSK • WPA2 MIXED PSK.

16. Reset your thermostat.

Power cycle the device for 30 seconds or perform a hard reset by pressing and holding the reset button for 30 seconds. This clears short term memory. Power cycle the router for 30 seconds. This clears short term memory and resets router tasks.

Is your network pairing with your thermostat now?

  • YES – Congratulations! You’ve fixed your Wi-Fi issue!
  • NO – Contact Support at 1-800-633-3991 or find a pro-installer in your area.

TCC

17. When did your Wi-Fi connection fail?

  • THERMOSTAT SET UP (Attempting to connect to my home wi-fi network) – Continue to the Thermostat Set Up subsection.
  • ONLINE REGISTRATION (Attempting to register the thermostat via the mytotalconnectcomfort.com web portal) – See the Registration Issues FAQ.

Thermostat Set Up

18. Go to your phone’s settings and forget other networks. (This ensures the phone does not automatically “jump” back to a known wi-fi network, which can disrupt the connection process)

19. Continue to the Thermostat-Network Pairing Issues subsection.

Old Thermostat, New Installation

20. Which app does your thermostat work with?

HONEYWELL HOME APP – Examples include the Lyric thermostats.

  • Continue to the Honeywell Homes subsection.

TOTAL CONNECT COMFORT APP – Compatible thermostats include Wi-Fi FocusPRO, VisionPRO, Prestige, and Wi-Fi programmable thermostats.

  • Continue to the TCC subsection.

Lost Wi-Fi on App/Thermostat

21. Have you recently changed your router or internet provider?

  • YES – Continue to the Thermostat-Network Pairing Issues subsection.
  • NO – Continue to the next step.

Go to your thermostat.

22. Is the thermostat showing offline?

  • YES – Reset your Wi-Fi on your router.
  • Continue to the next step.
  • NO – Continue to Step 26.

23. Is your thermostat still offline?

  • YES – The thermostat is still offline.
  • Contact Support at 1-855-733-5465 to find a pro-installer in your area.
  • NO – The thermostat is now online.
  • Continue to the next step.

24. Check your app: is the thermostat showing offline in your app?

  • YES – Your thermostat is online, but your app is showing that the thermostat is offline.
  • Contact Support at 1-855-733-5465 to find a pro-installer in your area.
  • NO – Continue to the next step.

25. Can you do anything in your app?

Try changing the temperature or anything.

  • YES – Congratulations! You’ve fixed your Wi-Fi issue!
  • NO – Restart the app, and then try again.
  • If that fails, update or reinstall your app, and then Continue to the next step.

26. Can you do anything in your app now?

Try changing the temperature or anything.

  • YES – Congratulations! You’ve fixed your Wi-Fi issue!
  • NO – Contact Support at 1-855-733-5465 to find a pro-installer in your area.

How do I change or reset the WiFi connection on my RTH8500WF WiFi Series WiFi Touchscreen Programmable Thermostat?

Wi-Fi Reset:

A basic Wi-Fi reset can be completed by removing the thermostat face plate from the wall plate for 30 seconds and then reattaching it. The thermostat will then attempt to reconnect to the previously configured Wi-Fi network. To connect to a new Wi-Fi network:

TH8320WF / RTH8580WF – Proceed to step 1 to “forget” the current Wi-Fi configuration and connect to a new network. If your thermostat is already registered to your account, step 2 and step 3 are not required.

TH8321WF – On the thermostat screen, select Menu – WiFi setup. Press the down arrow until “Disconnect Wi-Fi network?” is displayed and select Yes.

Connecting your thermostat to Wi-Fi can be performed during the initial setup and configuration, or later at a time you choose.

Connecting to Wi-Fi – Initial Setup:

After the Configuration step during the initial install, you will be prompted to connect your VisionPRO Wi-Fi 8000 to your Home Wi-Fi.

The VisionPRO Wi-Fi 8000 (TH8321WF) can be connected to Wi-Fi on the thermostat itself after initial setup / configuration, or from the Menu > Wi-Fi Setup screen. After successful connection, register your product on the mytotalconnectcomfort.com/portal website to complete the process and control the thermostat remotely.

The VisionPRO Wi-Fi 8000 (RTH8580WF / TH8320WF) uses a 3-step connection and registration process

Step 1 – Connect your mobile device to the thermostat’s Wi-Fi network (NewThermostatxxxxxx)

Step 2 – Connect the thermostat to your home Wi-Fi (via an internet browser on your mobile device)

Step 3 – Register with Honeywell / resideo. (Performed in the My Total Connect Comfort web portal)

*Registration cannot be performed with the mobile app, currently only supported via the web portal*

Step 1 – Connecting your mobile device to the thermostat’s Wi-Fi network (NewThermostatxxxxxx)

Once installed and configured, the (TH8320WF / RTH8580WF) thermostat will display “Wi-Fi Setup”. Open the Settings – Wi-Fi on your mobile device and connect to the Wi-Fi network named “NewThermostatxxxxxx”.

*If your thermostat does not display Wi-Fi Setup remove the thermostat faceplate from the wall plate for 30 seconds and then reattach it. If Wi-Fi setup does not display, enter the Installer Setup (press the System button, then hold the center blank box at the bottom of the thermostat display for 5-10 seconds until the screen changes) and use the User / Installation Guide to navigate the settings to function 0890 . Make sure function 0890 is set to 1, then proceed to function 0900. Use the up or down arrow to change function 0900 function to 0 then press done. WiFi setup will then be displayed on the screen. Return to step 1.*

**TH8321WF – After initial configuration, you will be prompted to connect to WiFi. Select your Home Wi-Fi network, then enter the password on your thermostat screen**

Step 2 – Connect the thermostat to your home Wi-Fi (via an internet browser on your mobile device)

Skip this step for the TH8321WF.

TH8320WF / RTH8580WF – After connecting to the thermostat Wi-Fi, open a web browser (Safari, Chrome, etc.) You should be automatically guided to a page labeled “Thermostat Wi-Fi Setup. If you are not automatically guided there, enter the IP address: 192.168.1.1 into the address bar on your browser to navigate there manually.

You should see your Home Wi-Fi network listed. Select it and enter your Wi-Fi password. After a brief connection period, your thermostat will display a “Connection Success” message. Reconnect your phone to your home wi-Fi network if your device does not reconnect automatically

*If you do not see your home Wi-Fi network, refresh the list. If your Wi-Fi network is still not displayed, check the Trouble Connecting? / Wi-Fi network recommendations below.*

Step 3 – Register at mytotalconnectcomfort.com/portal

Registration is completed at mytotalconnectcomfort.com/portal. Navigate to the page and create an account / login.

Select the “Add Device” icon and Input the MAC ID / CRC for your device. (MAC ID / CRC are located on your thermostat information card, on the back of the thermostat, or from the Menu > Equipment Status screen])

Complete the security check (if prompted) and follow the directions within the web portal to complete the registration.

How do I change from Fahrenheit to Celsius? (or Celsius to Fahrenheit)

To change the temperature display from Fahrenheit to Celsius (or Celsius to Fahrenheit), please follow these instructions, depending on your thermostat family model.

1000 to 6000 family models
You can change the temperature display by accessing function 14 in the system settings and switching to 1 or 0.
To learn how you can access function 14 on your system settings, please click on one of the links below, depending on your thermostat family model, and follow the instructions:

VisionPRO®
Please click here and follow the instructions.

Specifications

VisionPRO™ 8000 WiFi Programmable Thermostat
Thermostat TypeCommunicating, Digital, Low Voltage, Programmable
WiFi Specifications802.11b, 802.11g, 802.11n, 2.4GHz range
ColorArctic White
IncludesWiFi VisionPRO® 8000 thermostat, Screws and anchors, Install Guide
Program ModesManual / Not Programmed, 7-Day Programmable, Geofencing
Utility RewardsYes
Display TypeTouch Screen
Fan FunctionCycled, Continuous
Power SupplyHardwired
Product Height4.63 in
Product Length4.94 in
Product Width1.13 in
Warranty5 Years
Energy Star CertifiedYes
Stages3 Heat/2 Cool Heat Pumps, 2 Heat/2 Cool Conventional Systems

Downloads

Installation Guide [pdf]: VisionPRO 8000 Smart TH8321WF1001 Installation Guide

Product Information [pdf]: VisionPRO 8000 Series

TH8320WF
TH8320WF VisionPRO Wi-Fi 8000 User Manual

RTH8580WF
RTH8580WF VisionPRO Wi-Fi 8000 User Guide

TH8321WF
TH8321WF VisionPRO Wi-Fi 8000 User Guide

FAQ’S

How do I register my VisionPRO Wi-Fi 8000 thermostat?

You can register your thermostat using the touchscreen on the thermostat itself, or from the Menu > Wi-Fi Setup screen.

How do I connect my VisionPRO Wi-Fi 8000 thermostat to my Wi-Fi network?

Connecting to Wi-Fi can be performed during the initial setup and configuration, or later at a time you choose.

How do I change the name of my VisionPRO Wi-Fi 8000 thermostat?

The name of your thermostat can be changed from the Menu > Wi-Fi Setup screen.

How do I change the password for my VisionPRO Wi-Fi 8000 thermostat?

The password for your thermostat can be changed from the Menu > Wi-Fi Setup screen.

How do I change the location of my VisionPRO Wi-Fi 8000 thermostat?

The location of your thermostat can be changed from the Menu > Wi-Fi Setup screen.

How do I change which WiFi network my VisionPRO Wi-Fi 8000 thermostat connects to?

You can change which WiFi network your VisionPRO WiFi 8000 (TH8321WF) connects to by going to Menu > Settings > Network Settings and choosing a different network. This will disconnect you from your current network and connect you to the new one. Please note that this may cause you to loose connectivity with any other devices on your current network until they reconnect as well.

My VisionPRO WiFi 8000 (TH8321WF) is connected to WiFi, but it will not let me access any screens or menus, what should I do?

Your VisionPRO WiFi 8000 (TH8321WF) may have been disconnected from your WiFi network due to inactivity. To reconnect, go to Menu > Settings > Network Settings and choose your desired network. This will disconnect you from your current network and connect you to the new one. Please note that this may cause you to loose connectivity with any other devices on your current network until they reconnect as well.

What app do I use for Honeywell Vision Pro 8000?

The Honeywell WiFi VisionPro 8000 is a solid, professional, smart thermostat. You may require professional installation, especially if you have hardwired sensors to install. Once it is installed though, you will have full control over the system with the touchscreen interface and the use of the Honeywell mobile app.

Why is my Honeywell thermostat not working?

There are a number of reasons why your Honeywell thermostat may not be turning on. For example, your thermostat may need new batteries. Or, there could be an issue with the wires inside the thermostat. The thermostat may also be confused, in which case it may require a factory reset.

Can I control my thermostat from my phone?

Thermostats are one of the first gadgets that became “truly smart” when Nest released the world’s first smart thermostat in 2007. Nowadays all smart thermostats can be controlled via smartphone apps be it an iphone or android phone.

What is the difference between a smart thermostat and a WIFI thermostat?

A smart thermostat can learn and make decisions for you. A smart thermostat, just like a Wi-Fi thermostat, can be controlled by a connected device, such as your cell phone, via an app. Wi-Fi thermostats, however, don’t have the ability to learn from your usage.

How do I reset my Honeywell 8000 thermostat?

Resetting a Honeywell Thermostat
Power off the thermostat and remove the batteries. Put the batteries in the wrong way, with negative to positive and positive to negative. Wait ten seconds and put them back in the correct way. Your thermostat will be reset to factory settings.

VIDEO

Video Player

00:00

03:18

HONEYWELL-LOGO

VisionPRO 8000 WiFi Programmable Thermostat
www://honeywellhome.com/us/en/products/

Read more: https://manuals.plus/honeywell/visionpro-8000-wifi-programmable-thermostat#ixzz7f65vCQBQ

Leave a comment

Your email address will not be published.