The manual for the Io ADVERT covers the setup, operation, and troubleshooting of the 10-4360 Triple Trace Oscilloscope, including its optional Time-Voltage Module which enhances troubleshooting capabilities with features like a DC voltmeter and counter. It also details the use of the IG-4244 Precision Calibrator for maintaining oscilloscope performance and accuracy, providing specifications for both the oscilloscope and calibrator, along with instructions for calibration and component testing.

• Brand: Io
• Model: ADVERT
• Type: manual
• File size: 1.1 MB

Manual Overview

The Io ADVERT manual provides detailed guidance on troubleshooting, error diagnostics, calibration, and adjustments for the 10-4360 Triple Trace Oscilloscope and its accessories. For troubleshooting, the manual emphasizes the use of the Optional Time-Voltage Module to enhance effectiveness, offering capabilities such as a DC voltmeter and rer beget counter. Error diagnostics involve understanding various trigger signals, including internal and external triggers, with a tri-level mode switch to manage the trigger input bandpass. Calibration is crucial and can be achieved using the IG-4244 Precision Calibrator, which provides accurate time and amplitude signals for scopes with bandwidths over 100 MHz. The calibrator offers twenty-four square wave signals with precise timing and amplitude for oscilloscope adjustments. Board-level guidance includes using the component tester for in-circuit and out-of-circuit checks, and the use of a calibrated 1V P-P square wave signal for probe verification. The manual also details the specifications for vertical and horizontal deflection factors, input sensitivity, and rise time, ensuring technicians can maintain and adjust the oscilloscope for optimal performance.

Quick Issues Covered

• Diagnose power-up failures with 10-4360 Triple Trace Oscilloscope.
• Calibrate oscilloscope using 1G-4244 Precision Calibrator for accuracy.
• Trace circuits with detailed schematics for effective troubleshooting.

Overview

Refer to the PDF for details.

Specifications

• Deflection Factor: Sensitivity: 10 mV/cm to 20 V/cm, LI steps in 1-2-5 sequence.
• Variable: Continuous between steps to approximately 60 V/cm.
• Accuracy: 3%.
• Vertical Response: DC Coupling: DC to 10 MHz.
• AC Coupling: 2 Hz to 10 MHz.
• Rise Time: 35 ns.
• Overshoot: Less than 5%.
• Attenuator: Vertical Input: impedance: 1 megohm, shunted by 38 pF.
• Maximum Input: 400 volts peak, combined AC and DC.
• Connector: BNC.
• Modes: Signal, Y1 or Y2 selected by position control; Dual, Chopped (200 kHz) or alternate automatically selected by time/cm switch.
• Time Base, Ramp: 200 ns/cm to 0.2 s/cm, 19 steps in 1-2-5 sequence.
• Variable: Continuous between steps to approximately 0.6 s/cm.
• Accuracy: 3%.
• Magnifier: X5 (adds additional 2% to sweep accuracy).
• Sensitivity: Approximately 0.1 V/cm.
• Impedance: 1 megohm.
• Polarity: Positive input causes right-hand deflection.
• Frequency: DC to 1 MHz.
• Connector: BNC.
• Trigger: Internal: Automatic: Adjustable over 10 divisions, Normal: Adjustable over 10 divisions.
• Slope Selection: + or —.
• Impedance: 1 megohm, shunted by 40 pF.
• Connector: BNC.
• Y-Channel: Same as vertical.
• X-Channel: Same as vertical, except response limited to 1 MHz.
• Operating Temperature Range: 50-104 degrees F (10-40 degrees C).
• Power Requirements: 120 VAC, 60 Hz, 70 watts.
• Overall Dimensions: 67" H x 1274" W x 1994" D (17.6 x 32.7 x 48.9 cm).

Controls & Indicators

Refer to the PDF for details.

Installation / Setup

Refer to the PDF for details.

Operation

Refer to the PDF for details.

Troubleshooting & Error Codes

Refer to the PDF for details.

Safety & Warnings

Refer to the PDF for details.

Download ADVERT Manual (PDF – 1.1 MB)

Io-4360 ADVERT manual PDF (1.1 MB) guides technicians in troubleshooting and calibrating the device efficiently.

• Brand: Io-4360
• Model: ADVERT
• Type: Manual
• File size: 1.1 MB

Overview

Brief overview of the product.

Specifications

• Key spec 1
• Key spec 2

Controls & Indicators

Control panel/button layout.

Installation / Setup

1. Step 1…
2. Step 2…

Operation

Basic usage, modes, cycles.

Troubleshooting & Error Codes

Safety & Warnings

• Important warning…

Downloads

Download ADVERT manual (PDF)