The manual for the Heathkit 3V High Voltage Probe Kit provides detailed instructions for assembling the probe, connecting it to a VTVM, and safely measuring high DC voltages up to 30,000 volts. It also includes troubleshooting tips, such as ensuring proper grounding and connection to prevent exposure to dangerous voltages, and emphasizes careful handling of the 1090 megohm resistor.

• Brand: Heathkit
• Model: 3V
• Type: manual
• File size: 571.5 KB

Manual Overview

The Heathkit 3V manual provides detailed assembly instructions for a high-voltage probe kit designed to extend the voltage measurement capabilities of a standard VTVM by a factor of 100. The probe allows for safe measurement of DC voltages up to 30,000 volts, transforming the 300-volt range into a 30,000-volt range. The assembly process involves careful handling of a 1090 megohm resistor, which increases the input resistance of the meter to 1100 megohms. This ensures minimal loading when measuring high resistance circuits. The manual emphasizes safety precautions, such as ensuring the ground clip is connected between the chassis of the unit under test and the VTVM, and advises against measuring voltages exceeding 30,000 volts. Troubleshooting guidance is not explicitly detailed, but the assembly instructions stress the importance of proper connection and handling to ensure accurate readings and safety. The warranty covers parts replacement within three months, excluding tubes, meters, and rectifiers.

Quick Issues Covered

• Diagnose power-up failures with high voltage probe connections.
• Calibrate VTVM using 3V full scale range adjustments.
• Trace circuits with detailed schematics for high voltage measurements.

Overview

The product is a high voltage probe kit designed for use with VTVMs (Vacuum Tube Voltmeters) that have a 3V full scale range. The manual covers the assembly of the probe kit, which includes various components such as a 1090 megohm resistor, insulator sleeve, and heavy test lead. The probe is intended to increase the voltage measurement range of the VTVM by a factor of 100, allowing for measurements up to 30,000 volts DC. The manual also provides safety instructions for handling high voltages and details on warranty and assembly responsibilities.

Specifications

• VTVM with 3V Full Scale Range
• 1090 Megohm Resistor
• Input resistance increased to 1100 megohms
• Voltage ranges multiplied by 100
• Full scale reading of 300 Volts on 3 Volt position
• Maximum DC voltage measurement of 30,000 Volts

Controls & Indicators

Refer to the PDF for details.

Installation / Setup

The setup involves assembling the high voltage probe kit for a VTVM with a 3V full scale range. Key steps include handling the 1090 megohm resistor carefully, assembling the probe by attaching the body spring to the collar screw, and slipping the insulator sleeve over the body spring. The test lead is soldered to the phone plug and connected to the probe body, ensuring proper contact. The probe increases the input resistance of the meter to 1100 megohms, allowing high voltage measurements up to 30,000 volts DC. It is crucial to connect the ground clip between the chassis of the unit under test and the VTVM, and to ensure the probe is connected to the VTVM. The probe should be used with the power off initially, and high voltage condensers should be discharged after use.

Operation

Refer to the PDF for details.

Troubleshooting & Error Codes

Refer to the PDF for details.

Safety & Warnings

Handle the 1090 megohm resistor with care. High voltages are extremely dangerous. Never measure DC voltages in excess of 30,000 volts. Always make sure that the ground clip is connected between the chassis of the unit under test and the VTVM, and that the probe is connected to the VTVM. Wherever possible, contact the high-voltage by hooking the tip spring to the terminal under test with the power turned off. Then, without touching the probe, turn power on, take the reading, turn the power off, carefully discharge any high voltage condensers which may be in the circuit, and remove the probe from the circuit. While the conductors inside the handle and the test lead assembly never carry more than 300 volts when the probe is properly connected, these parts will be exposed to the full 30,000 volts if not connected to the VTVM.

Download 3V Manual (PDF – 571.5 KB)

Heathkit-336-hv-probe-manual-3V: Guide for troubleshooting and calibrating the 3V high-voltage probe. PDF size: 571.5 KB.

• Brand: Heathkit-336-hv-probe-manual
• Model: 3V
• Type: Manual
• File size: 571.5 KB

Overview

Brief overview of the product.

Specifications

• Key spec 1
• Key spec 2

Controls & Indicators

Control panel/button layout.

Installation / Setup

1. Step 1…
2. Step 2…

Operation

Basic usage, modes, cycles.

Troubleshooting & Error Codes

Safety & Warnings

• Important warning…

Downloads

Download 3V manual (PDF)