Safety and Warning Information

WARNING!
Main Supply: This equipment is designed to operate from a 100-240 Volt, 50/60Hz AC power supply. The use of other power sources may damage this equipment. Check that the voltage marked on the rating plate located at the rear of the power adaptor states 100-240V. The manufacturer will NOT accept responsibility or damage or injury caused by connecting to the wrong voltage.

  • The main plug shall be the main disconnect device and shall remain operable at all times.
  • Do not push objects into holes and ventilation slots.
  • Do not expose this product to moisture or place any objects filled with liquids on or near the product.
  • Do not place a naked flame source, such as lighted candles, on or near this product.
  • Do not store or operate the device in environments where the temperature is above 50 degrees celsius or below -10 degrees celsius.
  • Do not intentionally hit the device or place heavy or sharp objects on the device.
  • Only use accessories specified by the manufacturer.
  • Keep the device away from benzene, diluents, and other chemicals.
  • Do not attempt to repair this product yourself. Always use a qualified service agent to perform adjustments or repairs.

Basic Operation

Power on
In the shutdown state, long press “” button boots
Power off
In the power on state, long press the “” key 3 seconds then pop-up device options, select ” Power off ” for shut down.
Sleep
the machine under normal operating conditions, Short press the power button, Into hibernation, Now, Screen will close. Short press the power button again, Be able to resume normal mode. When the time being use this MID can enable this feature when, to reduce power consumption.
Power reset
If there is shutdown to the tablet in the process of operation, you can turn off and restart the tablet by pressing “reset” key.
Screen time out
If you do not contact the tablet within the set time, and do no operate by the button, the contact screen will be automatically off.
In any state, short press “” button and for activation; Then skid the lock upwards to the green of spotted which will accomplish to access to the upper interface.
If it is necessary to deactivate the contact screen time out function, you can set the [Screen time out] option under [display] function into “Never “.

Using the Micro SD card

After this unit is connected with the computer, you will find two moving disks.

The first one is the built-in memory disk for this unit and the other is the disk for the Micro SD card. If no card is inserted, the second disk can not be opened. This unit supports the extension of the Micro SD card from 4GB to 64GB.

Inserting and Pulling out the Micro SD card

  • Inserting:
    Put the Micro SD card face up (side with words), and slightly force the card into the socket of the card, i.e. connecting the unit. Under this state, you can play the content in the Micro SD card.
  • Pulling:
    Slightly push the Micro SD, and it will bounce by a section, and then you can take it out.
  • Caution:
    Please perform inserting and pulling operation when power is off! Otherwise, it will lead to the loss or damage to the files within the unit! If no card is inserted, the computer will be unable to perform read and write operation for the disk notes of the later removable disk (Micro SD card).
  • Battery:
    High capacity Polymer battery is used for this unit.
    The duration available of the battery power depends on volume, types of playing files and operation of batteries. The tablet can be set up by the user as “user define power off time” or “display setup” to save batteries.

Charging:
This unit can be recharged by USB port, using standard 5V/2A charger:

Warnings for charging:

  1. A new battery may be empty and not charged before you get the device.
  2. If the device is not used for long time, it is better to charge it to full capacity every 2 or 3 months during storage.
    Power adapter is a key component of the portable tablet, which play a crucial role in keeping the portable tablet’s normal work and protecting your security when using the tablet, a long-term customer surveys and after-sales service Practice shows that the malfunction of the portable tablet in many cases were caused by using inappropriate accessories, in particular the power adapter.
    Use the substandard power adapter will shorten the life of the portable tablet by considerably, the voltage instability will seriously affected the normal work of the portable tablet and bring permanent damage on the tablet’s performance and reliability, Use the substandard power adapter will also reduce the vocal quality of the tablets, shut down the tablet when you using it, In addition, Use the substandard power adapter will cause combustion and explosion which will disserve the safety of the consumers.

Setting up your tablet

  1. SAMSUNG T805 Tablet PC-1
  2. After charging the battery, press and hold the power button for up to 5 seconds until the pattern is displayed.
    IMPORTANT: If the battery image is not displayed on the screen, press the power button briefly to display the image, and then press and hold the power button until the logo is displayed.
  3. Follow the on-screen instructions to select a language and a wireless network.
Lock and unlock

Lock—Press the power button.
Unlock—Press the power button to turn on the tablet, then place your finger on the lock icon and slide the icon to the unlock position

Turn off the tablet

Press and hold the power button,touch Power off, and then touch OK.
If your tablet becomes unresponsive,press and hold the power button for several seconds to turn off the tablet.

All apps—Swipe up from bottom and display a list of all apps installed.

SAMSUNG T805 Tablet PC-2

NOTE: The appearance of the Home screen may vary.

Google
Search—Allows you to type one or more keywords to search.

The search feature varies by model and country.

with the installed search app.

Use gestures

SAMSUNG T805 Tablet PC-3

The following gestures can be used with your tablet:

Organize the Home screen

  • To add an app or a widget to the Home screen, touch the Apps tab or the Widgets tab, and then tap and hold an app or widget until it is added to the Home screen.
  • To remove an app or widget from the Home screen, drag it to the X at the top of the screen.

Change your tablet’s view

The Auto-rotate feature allows you to change your tablet’s view. For landscape view, hold the tablet horizontally. For portrait view, hold the tablet vertically.

NOTE: Some apps do not rotate automatically.

To change the Auto-rotate setting, swipe down from the top of the screen to display notifications, and then touch the Screen rotation icon to lock or unlock the screen rotation.

Return to the Home screen

To quickly return to the Homescreen, touch .

SAMSUNG T805 Tablet PC-4


Display apps,widgets, and notification.

  • Apps—Swipe up from bottom of home screen to see a list of all apps.
  • Widgets—Touch , and then touch the Widgets tab to see a list of all widgets.
  • Notification—Swipe down from the top of the screen to see your notifications.

Back up your data

Strongly encourages that you periodically back up your personal data and media on your tablet to another computer, a dedicated storage device, or to the cloud using one of several commercially available solutions.

Configuring the Android Operating System Settings
Tap on the “Settings” icon to configure the following three relevant Android system settings:

SAMSUNG T805 Tablet PC-5

Connecting to a Wireless Network
The preselected item on the left hand settings menu is “Wi-Fi”. To enable wireless connections, drag the “Wi-Fi” menu item slider to the right to display “ON”. After a few seconds available wireless networks appear on the right side of the screen. Select a network to configure and connect to it.

Enable USB Debugging
This setting allows developers to debug their applications. Select “Developer options”on the left hand menu and then ensure “USB debugging” on the right is checked. Under the “Device” section on the left side menu, “USB” and then “Connect to PC” also needs to be enabled.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Documents / Resources

SAMSUNG T805 Tablet PC [pdf] User Manual
T805, 2AZNOT805, T805 Tablet PC, Tablet PC

Leave a comment

Your email address will not be published.