Package contents

  • Device
  • USB cable
  • Ejection pin
  • USB power adaptor
  • Quick start guide

The items supplied with the device and their images may vary by region.

Device layout


To turn on the device, press and hold the Side key for a few seconds.

Installing a nano-SIM cardSAMSUNG-SM-M625F-DS-128GB-Smart-Phone-FIG-3

Correct disposal

This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste.
This product is RoHS compliant.
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste.

  • If your device is frozen and unresponsive, press and hold the Side key and the Volume Down key simultaneously for more than 7 seconds to restart it.
  • Depending on the region or model, some devices are required to receive approval from the Bureau of Indian Standards (BIS). If your device is approved by the BIS, you can view the BIS mark of the device. To view the BIS mark, launch the Settings app and tap About phone → Regulatory information.
  • It is recommended not to use fixed graphics on part or all of the touchscreen for extended periods. Doing so may result in afterimages (screen burn-in) or

To prevent possible hearing damage when using a headset, do not listen to sound at high volume for long periods.


Safety information

Read all safety information before using the device to ensure safe and proper use. You can view more safety information in the safety information menu of the
Settings app.


Follow the warnings below to prevent incidents, such as fires or explosions, injuries, or damage to the device

  • Do not expose the device to physical impact or damage.
  • Use only Samsung-approved batteries, chargers, and cables specifically designed for your device.
  • Prevent the multipurpose jack and battery terminals from coming into contact with foreign materials such as metal, liquids, or dust.
  • If any part of the device, such as the glass or acrylic body, is broken, smokes, or emits a burning odor, stop using the device immediately. Use the device again
    only after it has been repaired at a Samsung Service Centre.
  • Do not turn on or use the device when the battery compartment is exposed.
  • Do not disassemble or reuse the battery.
  • Do not allow children or animals to chew or suck the device.
  • The device can be used in locations with an ambient temperature of 0 °C to 35 °C. You can store the device at an ambient temperature of -20 °C to 50 °C.
    Using or storing the device outside of the recommended temperature ranges may damage the device or reduce the battery’s lifespan.
  • Do not use your device in a hot environment or near fire.
  • Comply with all safety warnings and regulations regarding mobile device usage while operating a vehicle.


Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves (radio frequency electromagnetic fields)
recommended by the Indian Government guidelines. The guidelines include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The radio wave exposure guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 1.6 W/kg  Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The highest SAR value under the Indian Government guidelines for this device model is: Maximum SAR for this model and conditions under which it was recorded during use, the actual SAR value for this device is usually well below the value stated above. This is because, for purposes of system efficiency and to minimise interference on the network, the operating power of your mobile device is automatically decreased when full power is not needed for the call. The lower the power output of the device, the lower its SAR value. An organisation such as the World Health Organisation and the US Food and Drug Administration have suggested that if people are concerned and want to reduce their exposure, they could use a hands-free accessory to keep the wireless device away from the head during use, or reduce the amount of time spent using the device. For more information,
visit and search for your device with the model number.

Supporting Indian official languages

Your device supports Indian official languages and is capable of sending and reading the message in the languages.
Indian official languages are as follows.

Language NameInput SupportMessage Readability Support
  • To transfer data of the previous device to a new device: Visit for more information.
  • If your device is frozen and unresponsive, press nd hold the Power key and the Volume Down key simultaneously for more than 7 seconds to restart it.

Specific Absorption Rate (SAR) Certification Information

Your device is a radio transmitter and receiver. It is designed and manufactured not to exceed the exposure limits for Radio Frequency (RF) energy set by the

Federal Communications Commission (FCC) of the U.S. Government.

These FCC RF exposure limits are derived from the recommendations of two expert organizations: the National Council on Radiation Protection and Measurement
(NCRP) and the Institute of Electrical and Electronics Engineers (IEEE). In both cases, the recommendations were developed by scientific and engineering experts drawn from industry, government, and academia after extensive reviews of the scientific literature related to the biological effects of RF energy.

The RF exposure limit set by the FCC for wireless mobile devices employs a unit of measurement known as the Specific Absorption Rate (SAR). The SAR is a measure of the rate of absorption of RF energy by the human body expressed in units of watts per kilogram (W/kg). The FCC SAR limit incorporates a substantial margin of safety to give additional protection to the public and to account for any variations in measurements.
SAR tests are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum reported value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output
of the device.
For more information about SAR, visit:

Before a new model device is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the SAR limit established by the FCC. Tests for each model are performed in positions and locations (for example, at the ear, worn on the body, or worn on the wrist) as required by the FCC. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.

This equipment complies with FCC RF Radiation exposure limits set forth for an uncontrolled environment.
For typical operation, this device has been tested and meets FCC SAR guidelines. The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF
exposure guidelines. SAR values for body-worn operations are measured when used with an accessory that contains no metal and that positions the device a minimum of 1.5 cm from the body. The FCC safety limit for body-worn SAR is 1.6 watts per kilogram (1.6 W/kg).

This device has FCC ID: A3LSMM625F and Model
Number: SM-M625F/DS. The FCC ID
is also printed somewhere on the mobile device. Depending on the device, you may need to remove the battery to find the FCC ID.
SAR information for this and other devices can be found on the FCC website at: Follow the instructions on the website to use the FCC ID to find SAR values for the device. SAR information for this device can also be found on Samsung’s website at:

FCC Part 15 Information and Notices

Note: Any device that uses Bluetooth or Wi-Fi is subject to FCC Part 15. Any device with a power supply is subject to Part 15 which also covers both intentional radiators (Bluetooth and Wi-Fi) and unintentional radiators (such as emissions from power supplies and circuit boards).
Pursuant to Part 15.21 of the FCC Rules, you are cautioned that changes or modifications not expressly approved by Samsung could void your authority to operate the device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/ TV technician for help.

Responsible party – U.S. Contact Information Samsung Electronics America, Inc.
QA Lab America
19 Chapin Rd. Building D, Pine Brook NJ 07058 Tel: 1-973-808-6375 Fax: 1-973-808-6361

FCC Notice
The device may cause TV or radio interference if used in close proximity to receiving equipment. The FCC can require you to stop using the mobile device if such
interference cannot be eliminated.

Samsung mobile products and Recycling

WARNING! Never dispose of batteries in a fire because they may explode.
Samsung cares for the environment and encourages its customers to properly dispose of Samsung Mobile Devices and Samsung accessories in accordance with local regulations. In some areas, disposal of these items in household or business trash may be prohibited.
Proper disposal of your Device and its battery is not only important for safety, it benefits the environment. We’ve made it easy for you to recycle your old Samsung Mobile Devices and batteries by working with respected take-back companies in every state in the country.

  • Help us protect the environment – recycle!
    For battery and cell phone recycling, go to or call 1-800-822-8837.

In addition, most carriers will provide a take- back option for proper disposal of products when purchasing new products.
Dispose of other unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: or call 1-800- SAMSUNG.

Documents / Resources

SAMSUNG SM-M625F-DS 128GB Smart Phone [pdf] User Guide
SMM625F, A3LSMM625F, SM-M625F-DS, SM-E625F-DS, 128GB Smart Phone

Leave a comment

Your email address will not be published.