How to prepare the USB Memory Drive

  1. Connect the USB Memory Drive to the USB port of your PC. Copy the file to USB Memory Drive.
  2. Download the firmware file from Samsung.com into your computer. File Name: SAT iMX8MWWC.zip
  3. Go to the USB Memory Drive, and then unzip the file stored in the USB memory drive.
  4. Confirm that a folder containing the firmware files has been added to the USB memory drive.
  5. Confirm that USB Drive has a folder named ‘ SAT iMX8MWWC.zip ’ in the root directory.SAMSUNG-How-to-Upgrade-the-Firmware-by-USB-FIG- (1)
  6. Safely disconnect the USB memory drive by clicking on ‘ Safely Remove ’ in Task Bar.

(For HW Q950T/Q900T/Q850T/Q800T/Q70T/Q76T)

  1. Turn on the Soundbar and insert the USB drive into the SERVICE port located at the bottom of the Main Unit. The software will begin to update automatically in less than one minute.
  2. A sequence of “UPDATE” → “BYE” → “ON” will appear on the display 3 times It would take around 6 minutes
  3. After the 3 cycles are complete, the Soundbar will restart and the last source used will appear on the display for about 20 seconds, and then it will go off.SAMSUNG-How-to-Upgrade-the-Firmware-by-USB-FIG- (2)

The cycle and duration of the update may differ by models

Important

  • Please DO NOT turn off the power or remove the USB while the update.

(For HW S60T/S61T/S66T/S67T)

  1. Turn on the Soundbar and insert the USB drive into the SERVICE port located at the bottom of the Main Unit. The software will begin to update automatically in less than one minute.
  2. The update sequence as below table. (It would take around 3 minutes.SAMSUNG-How-to-Upgrade-the-Firmware-by-USB-FIG- (3)
  3. After the update, the product will power off automatically

When there are more than one function blocks to be updated(B/ E, Micom, etc the updates for each function block will be executed sequentially after reboot so it may reboot multiple times.

Important

  • Please DO NOT turn off the power or remove the USB while the update

Documents / Resources

SAMSUNG How to Upgrade the Firmware by USB? [pdf] User Guide
How to Prepare the USB Memory Drive, How to Upgrade the Firmware by USB, HW-Q950T, Q900T, Q850T, Q800T, Q70T, Q76T

Leave a comment

Your email address will not be published. Required fields are marked *