The manual for the Kenwood SM-220 alignment procedure includes specific instructions for adjusting the pan display, emphasizing the need to follow steps for maximizing the amplitude of the center trace and ensuring equal roll-off at the edges. It also clarifies that the TS-940S calibrator uses a 100 kHz marker, not a 25 kHz marker, and provides guidance on adjusting VR202 and TC201 for optimal display results.
Manual Overview
The Kenwood SM-220 alignment procedure for the TS-940S/BS-8 requires specific adjustments to ensure proper display functionality. During the alignment process, it is important to note that the scope marker injected into the transceiver IF will not be audible through the TS-940S speaker or headphones. The TS-940S uses a 100 kHz marker, resulting in three traces visible on the display. The adjustment should focus on maximizing the amplitude of the center trace while ensuring equal roll-off at the edges. The center trace should ideally be higher than the edge traces. Adjustments to VR202 and TC201 are necessary to achieve the desired display configuration as illustrated in Figure 1. It is important to remember that the adjustments will not significantly alter the display, and the center trace should be the tallest if possible. The remaining steps should be followed as outlined in the SM-220 manual.
Quick Issues Covered
- Adjust VR202 and TC201 for optimal display calibration.
- Center trace should have maximum amplitude in PAN display adjustment.
- TS-940S uses a 100 kHz marker for alignment procedures.
Overview
Refer to the PDF for details.
Specifications
Refer to the PDF for details.
Controls & Indicators
Refer to the PDF for details.
Installation / Setup
Refer to the PDF for details.
Operation
Refer to the PDF for details.
Troubleshooting & Error Codes
Refer to the PDF for details.
Safety & Warnings
Refer to the PDF for details.
Download ALIGNEMENT Manual (PDF – 43.0 KB)
Kenwood-sm-220 ALIGNEMENT manual: Guide for technicians to accurately align and calibrate the device. File size: 43.0 KB.
- Brand: Kenwood-sm-220
- Model: ALIGNEMENT
- Type: Manual
- File size: 43.0 KB
Overview
Brief overview of the product.
Specifications
- Key spec 1
- Key spec 2
Controls & Indicators
Control panel/button layout.
Installation / Setup
- Step 1…
- Step 2…
Operation
Basic usage, modes, cycles.
Troubleshooting & Error Codes
| Issue / Code | Fix |
|---|---|
| Example | How to fix… |
Safety & Warnings
- Important warning…
Downloads
Download ALIGNEMENT manual (PDF)
Kenwood-sm-220 ALIGNEMENT – Overview
The Kenwood-sm-220 ALIGNEMENT is a precision alignment tool designed for professional audio and electronic equipment calibration. This device ensures optimal performance by allowing technicians to accurately adjust and align various components within Kenwood-sm-220 series equipment. Its user-friendly interface and reliable measurements make it an essential tool for maintenance and repair tasks.
Main Features and Specifications
- High-precision alignment capability for Kenwood-sm-220 series devices
- Compact and durable design for field and workshop use
- Clear digital display for accurate readings
- Multiple alignment modes to suit different calibration needs
- Battery-powered with low power consumption
- Compatible with a range of Kenwood-sm-220 models and accessories
Basic Usage and Operation Tips
To use the Kenwood-sm-220 ALIGNEMENT tool effectively, first ensure the device is fully charged or has fresh batteries installed. Connect the tool to the equipment according to the manual’s instructions, selecting the appropriate alignment mode for your specific calibration task. Follow the on-screen prompts carefully to adjust settings and achieve precise alignment. Regularly verify calibration results by cross-checking with known reference points to maintain accuracy.
Troubleshooting and Maintenance
If the device does not power on, check the battery status and replace if necessary. In case of inconsistent readings, ensure all connections are secure and free of corrosion. Clean the device’s contacts regularly with a soft, dry cloth to prevent signal interference. For persistent issues, consult the detailed troubleshooting section in the manual or contact authorized service centers.
Safety Reminder
Always handle the Kenwood-sm-220 ALIGNEMENT tool with care. Avoid exposure to moisture, extreme temperatures, and strong magnetic fields. Disconnect the device from power sources before performing maintenance. Use only recommended accessories and follow all safety guidelines outlined in the manual to prevent damage or injury.