tubefemdom.net

logo

JBL WS-MC-5 3-Inch Gauge Style AM and FM Stereo with 2.7-Inch LCD Display

JBL WS-MC-5 3-Inch Gauge Style AM and FM Stereo with 2.7-Inch LCD Display product-img

Installation Specifications

JBL WS-MC-5 3-Inch Gauge Style AM and FM Stereo with 2.7-Inch LCD Display fig (2)

Product Dimensions

JBL WS-MC-5 3-Inch Gauge Style AM and FM Stereo with 2.7-Inch LCD Display fig (3)

Included Hardware

Wiring Harness Diagram for WS-MC-5JBL WS-MC-5 3-Inch Gauge Style AM and FM Stereo with 2.7-Inch LCD Display fig (4)

Wire Diagram for Connector AJBL WS-MC-5 3-Inch Gauge Style AM and FM Stereo with 2.7-Inch LCD Display fig (5)

Wire Connector A:

 Pin No. Wire ColorI Wire Definition I Pin No. Wire ColorI Wire Definition
1BlackGND7RedBattery
2Purple/BlackRear Right-8White/BlackFront Left-
3PurpleRear Right+9WhiteFront Right+
4BlueAmplifier On10OrangeDim Input
5Grey/BlackFront Right-11Green/BlackRear Right-
6GreyFront Right+12GreenRear Right+ 

Features

Features Included

  • AM & FM
  • Bluetooth Streaming, Auxiliary,
  • Simple & Secure Bluetooth Pairing for Android & IOS (A2DP/AVRCP 1.4)
  • 2. 7″ LCD Display
  • Internal Power Amplifier 4x50W@ 2 Ohm Max Output
  • Front & Rear Preamp outputs with fading capability
  • Front Panel Mounted Independent Secondary Zone Control -Full Range or Subwoofer
  • Day/Night Illumination & Dimming

Hardware Included: 

  • Silicon cover
  • Wiring harness
  • Mounting hardware
  • Mounting bracket
  • MC-5 bezel

WS-MC-5 Controls

JBL WS-MC-5 3-Inch Gauge Style AM and FM Stereo with 2.7-Inch LCD Display fig (6)

Controls allow you to navigate and access MC-5 features.

  1. Main Control Knob (MCK): This allows adjustment of main volume, as well as making selections when the SETUP and MENU features are being used. Rotate the MCK to highlight a feature, then depress the MCK to select the highlighted feature.
  2. Power/Mute: Press and hold this button for power On/Off. Short press this button to mute/unmute the volume of all zones. The MC-5 will confirm the volume is muted in the display.
  3. Setup: Allows access to controls that affect all functions of the MC-5. Rotate the MCK until the desired function is highlighted, then depress the MCK for access.
  4. Menu: Allows access to Presets in Radio mode.
  5. Zone 2 – : Decrease the output sent to the zone 2 pre-amp outputs.
  6. Zone 2 + : Increase the output sent to the zone 2 pre-amp outputs. Note – The main volume control will still override final output of front, rear & zone 2 outputs.
  7. Track Back/ Tuner Seek Down: In Bluetooth mode, this will go back to the previous track. In Radio mode, this will seek out the strongest station in decreasing frequency order.
  8. Track Forward/ Tuner Seek up: In Bluetooth mode, this will go forward to the next track. In Radio mode, this will seek out the strongest station in increasing frequency order.
  9. Source (SRC): Allows access to three different sources.
  10.  Band: This enables changing the Radio from FM1/FM2/FM3/AM1/AM2 modes.
  11. Play/Pause: This is active when using the Bluetooth streaming. Press once for pause, once again for play. This also enables changing between presets while in FM1/FM2/FM3/AM 1 / AM2 modes.

Setup Menu

Allows access to controls that affect all functions of the MC-5. Rotate the MCK until the desired function is highlighted, then depress the MCK for access. The functions available are:

Audio

Allows access to the following audio adjustments:

Balance/ Fader: Allows adjustment of the Balance (Left/Right) and Fader (Front Rear) of the main outputs – both powered & pre-amp. Rotate the MCK to highlight the desired function, depress the MCK then rotate the MCK to adjust the function.
Equalization: The MC-5 has 5 different factory equalization settings for the 5 Band equalizer. Setting to off, allows the user to set their own equalization curve. Rotate & depress the MCK to select one of 5 the bands of equalization, rotate the MCK to adjust.
Internal AMP: When bypassing the MC-S’s internal amplifier and using solely external amplifiers, set this control in the off position for greater efficiency.
Zone 2: This control changes the label of the zone 2 output to either Full Range or Subwoofer.
Note – This only affects the label shown on the MC-5 Display when the zone 2 front panel controls are adjusted. The zone 2 output is always a mixed mono output – even when in full range.

Tuner Region

The MC-5 is defaulted to receive broadcasts in the USA region. Europe region is also available through this setting.

Day/ Night Mode

Allows the ability to scroll through the display options of Day (white screen/black characters), Night (black screen/ white characters), or Auto. In Auto mode, the display is in Day mode until the vehicle’s lights are turned on, then the display goes into

Night mode.

Note – In order for the Auto function to operate properly, the Orange wire in the MC-5 harness labeled Dim Input must be wired to a circuit in the vehicle that gets + 12V whenever the main lighting switch is turned on.

Software

Allows access to the software menu of the MC-5:
Version: Displays what version of the operating software is currently running on the MC-5. Visit www.wetsounds.com/downloads to see the most up to date MC-5 operating software.

Factory Default

Selecting this will return all settings of the MC-5 back to the original.

Source (SRC)

Allows access to three different sources:

Radio Operation

  1. Press SRC, then select the JBL WS-MC-5 3-Inch Gauge Style AM and FM Stereo with 2.7-Inch LCD Display fig (7) symbol to access the Radio.
  2. To select between FM1/FM2/FM3/AM1/AM2, press the BAND button (#10).
  3. Short Press the tunner seek up/down buttons (#7 /#8) to automatically seek the next strongest station either up or down.
  4. Long press the same buttons to Manually Tune either up or down.

Source Features:
Press MENU while in Radio Operation to select between the following features:

  • PRESETS: Press Pres SRC to display what stations are set in current band in use, then rotate the MCK to highlight a selection, then press the MCK to select that station.
  • ADD PRESETS: Allows the manual addition of station presets in each band.
  • AUTO STORE: Will automatically store Presets into the BAND currently being used.

Bluetooth Streaming Operation

  1. Press SRC, then select the JBL WS-MC-5 3-Inch Gauge Style AM and FM Stereo with 2.7-Inch LCD Display fig (8) symbol to access the Bluetooth streaming input.
  2. To connect a Bluetooth-compatible device to the MC-5, make sure no other devices are paired to the MC-5, then be sure to enable BT on the device.
  3. Search on the device’s Bluetooth menu for “WETSOUNDS MCS” and connect with it. The MC-5 will confirm connection on the display.
  4. PLAY/PAUSE (#11) and Forward/Reverse Track (#7 /#8) will operate when in Bluetooth mode..

AUX Operation

  1. Press SRC, then select the JBL WS-MC-5 3-Inch Gauge Style AM and FM Stereo with 2.7-Inch LCD Display fig (9) symbol to access the AUX input.

FCC Compliance Statment

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates-and can radiate-radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particu lar installation . If the equipment does not cause harmful interference to radio or telev1s1on reception , which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna
  • Increase the separation between the equipment and the receiver
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help. The provided shielded USB cable must be used with this unit to ensure compliance with the class B FCC limits. Warning Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Trademarks

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. © 202 1 Wet Sounds, Inc All Rights Reserved WET SOU NDS and associated logos where applicable are registered trademarks of Wet Sounds Corporation in the United States and/or other countries. All other trademarks are the property of their respective owners.

Limited Warranty

What This Warranty Covers: This 1s a “l1m1ted ” warranty. This warranty covers any defect in materials and workmanship. This warranty only covers the original purchaser and 1s not transferable. This warranty is also only valid if the original purchase was made from an authorized Wet Sounds TM dealer. How Long Coverage Lasts: This warranty extends for 2 years from the date of purchase It is recommended to REGISTER your warranty online within 45 days of purchase at www.wetsounds.com – click on “warranty registration”. What Is Not Covered: This warranty does not cover fading or discoloration caused by exposure to sunl ight or chemicals such as ammonia, household bleach, or any cleaning material that contains abrasive substances. Wet Sounds, Inc. does not cover the expense for •emoval or re-installation. Additionally, shipping TO Wet Sounds, Inc. must be paid for by
the purchaser. This warranty 1s void and inapplicable is Wet Sounds deems that the product was abused or misused; including but not limited to damage caused by accident, mishandling, improper installation, removing the inline fuse on the power connection, negligence, normal; wear and tear, excessive water or heat damage, freight/shipping damage, or products that have been disassembled by anyone other than Wet Sounds technical staff. Wet Sounds will not be responsible for any incidental or consequential damages, except to the extent provided (or prohibited} by applicable law. This warranty gives you specific rights, and you may also have other rights which vary from state to state
What Is Not Covered: This warranty does not cover fading or discoloration caused by exposure to sunlight or chemicals such as ammonia, household bleach, or any cleaning material that contains abrasive substances. Wet Sounds, Inc. does not cover the expense for removal or re-1nstallat1on. Additionally, shipping TO Wet Sounds, Inc. must be paid for by
the purchaser. This warranty is void and inapplicable 1s Wet Sounds deems that the product was abused or misused; including but not limited to damage caused by accident, mishandling, improper instal lation, removing the inline fuse on the power connection, negligence, normal; wear and tear, excessive water or heat damage, freight/shipping damage, or products that have been disassembled by anyone other than Wet Sounds technical staff. Wet Sounds will not be responsible for any incidental or consequential damages, except to the extent provided (or prohibited) by applicable law. This warranty gives you specific rights, and you may also have other rights which vary from state to state
What Wet Sounds, Inc. Will Do: Wet Sounds, Inc. will repair any part of your product that proves to be defective 1n materials or workmanship. In the event repair 1s not possible. Wet Sounds will replace the product in question. If it 1s deemed necessary Wet Sounds, Inc. will either replace the entire product with a refurbished unit or it will be replaced with a model that is similar in price is that model 1s no longer available. Labor costs and materials needed to complete this service will be at No Charge to the purchaser. Additionally, return sh1pp1ng FROM Wet Sounds, Inc. to the purchaser will be paid for by Wet Sounds How To Get Service: Contact Wet Sounds, Inc. either by phone (877-938-7757) or by email (warranty@wetsounds.com). A service representative will assist you in confirming that the problem you are experiencing 1s caused by a defective product and 1f that product is covered under warranty. The service representative will issue you a Return Manufacturer’s Authorization (RMA} and other details to obtain service for your product. How To Get Service: Contact Wet Sounds, Inc. either by phone (877-938-7757) or by email (warranty@wetsounds.com). A service representative will assist you in confirming that the problem you are experiencing is caused by a defective product and if that product is covered under warranty. The service representative will issue you a Return Manufacturer’s Authorization (RMA) and other details to obtain service for your product. DO NOT RETURN YOUR PRQQ.UCT. WITJ:I.QUJ Tl1E PROPER RETURN AUTHORIZATIOIIURMAll Internet Warning: Wet Sounds, Inc. products sold on any non-authorized web site or internet auction site are void of any and all manufacturer’s warranty. Please contact Wet Sounds (877-938-7757) or visit our web site (www.wetsounds. com} for a list of authorized online sellers or to find an authorized installing retailer near you.

877-938-7757
www.wetsounds.com
10621 S. Sam Houston PKWY W, Suite 100 Houston, Texas 77071 USA

Documents / Resources

JBL WS-MC-5 3-Inch Gauge Style AM and FM Stereo with 2.7-Inch LCD Display [pdf] Owner’s Manual
WS-MC-5, 3-Inch Gauge Style AM and FM Stereo with 2.7-Inch LCD Display, WS-MC-5 3-Inch Gauge Style AM and FM Stereo with 2.7-Inch LCD Display

References

Leave a comment

Your email address will not be published.