tubefemdom.net

How to wear

JBL VIBE 200TWS True Wireless In Ear Headphone - how

FIRST TIME USE

JBL VIBE 200TWS True Wireless In Ear Headphone - FIRST

power on & CONNECT

JBL VIBE 200TWS True Wireless In Ear Headphone - Ipower

DUAL CONNECT

JBL VIBE 200TWS True Wireless In Ear Headphone - DUAL CONNECT

BUTTON COMMAND

JBL VIBE 200TWS True Wireless In Ear Headphone - BUTTON COMMAND

power off

JBL VIBE 200TWS True Wireless In Ear Headphone - power off

Manual Controls

JBL VIBE 200TWS True Wireless In Ear Headphone - BUTTON COMMAND

Charging

JBL VIBE 200TWS True Wireless In Ear Headphone - Charging

LED behaviors

JBL VIBE 200TWS True Wireless In Ear Headphone - led behaviors

JBL VIBE 200TWS True Wireless In Ear Headphone - icon5TECH SPEC

Model:VIBE200TWS
Driver size:8 mm/ 0.315” Dynamic Driver
Power supply:5 V  1 A
Weight:47.5 g/ 0.105 lbs
Headset battery type:Lithium-ion Battery (48 mAh/ 3.7 V)
Charging case battery type:Lithium-ion Battery(500 mAh/ 3.7 V)
Charging time:2 hrs from empty
Music playtime with BT on:up to 5 hrs
Frequency response:20 Hz – 20 kHz
Impedance:16 ohm
Sensitivity:108 dB SPL@1 kHz
Maximum SPL:93 dB
Microphone sensitivity:-38 dB/Pa @1 kHz
Bluetooth version: 5.0
Bluetooth profile version:A2DP V1.3, AVRCP V1.6, HFP V1.7
Bluetooth transmitter frequency range:2.400 GHz – 2.4835 GHz
Bluetooth transmitter power:12 dBm
Bluetooth transmitter modulation:GFSK, π/4 QPSK, 8DPSK
Maximum operation temperature:45°C
JBL VIBE 200TWS True Wireless In Ear Headphone - warning

TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTING.

IC RF Exposure Information and Statement

The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-JBLV200TWS) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.206 W/Kg.The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories
that maintain a separation distance of 0mm between the user›s head and the back of the headset. The use of belt clips, holsters, and similar accessories shall not contain metal parts in its assembly. The use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.

Head operation

The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user›s ear and the product (including the antenna). Head exposure that does not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.
IC: 6132A-JBLV200TWS

FCC ID: APIJBLV200200TWS

JBL Endurance RaceTWS Waterproof True Wireless Active Sport Earbuds - BLUETOOTH

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by HARMAN International Industries, Incorporated is under license.

Other trademarks and trade names are those of their respective owners.

HP_JBL_VIBE200TWS_QSG_US_SOP_V5

Documents / Resources

JBL VIBE 200TWS True Wireless In Ear Headphone [pdf] User Guide
VIBE 200TWS, True Wireless In Ear Headphone, VIBE 200TWS True Wireless In Ear Headphone, In Ear Headphone, Headphone

Leave a comment

Your email address will not be published.