JBL-logo

JBL ON-THE-GO Portable Bluetooth Party Speaker

JBL-ON-THE-GO-Portable-Bluetooth-Party-Speaker-Product

Before using this product, read the safety sheet carefully

What in the Box

JBL-ON-THE-GO-Portable-Bluetooth-Party-Speaker-fig-1

Power cord quantity, plug type, and microphone quantity vary by region.

Charging ConnectionJBL-ON-THE-GO-Portable-Bluetooth-Party-Speaker-fig-2

Fully charge the speaker before outdoor use.

Bluetooth Connection

JBL-ON-THE-GO-Portable-Bluetooth-Party-Speaker-fig-3

Fully charge the speaker before outdoor use.

USB ConnectionJBL-ON-THE-GO-Portable-Bluetooth-Party-Speaker-fig-4

How to Use

JBL-ON-THE-GO-Portable-Bluetooth-Party-Speaker-fig-5

Microphone

JBL-ON-THE-GO-Portable-Bluetooth-Party-Speaker-fig-6
  •  Rotate to adjust gain (for wired microphone only).
  • Rotate to adjust the microphone volume, echo, treble, and bass respectively

Guitar

JBL-ON-THE-GO-Portable-Bluetooth-Party-Speaker-fig-7
  • Rotate to adjust the guitar gain.
  • Rotate to adjust the guitar volume.

AUX

JBL-ON-THE-GO-Portable-Bluetooth-Party-Speaker-fig-8

Smartphone Connection

JBL-ON-THE-GO-Portable-Bluetooth-Party-Speaker-fig-9

LED Indicator

JBL-ON-THE-GO-Portable-Bluetooth-Party-Speaker-fig-10

L channel/R channel

JBL-ON-THE-GO-Portable-Bluetooth-Party-Speaker-fig-11

Warning

JBL-ON-THE-GO-Portable-Bluetooth-Party-Speaker-fig-12

Always keep the charging port dry before connecting AC power.

Specification

  • Product name: PARTY BOX ON-THE-GO
  • AC power input: 100 – 240 V ~ 50/60 Hz
  • Built-in Battery: 18 Wh
  • Power consumption: 60 W
  • Total output power: 100 W RMS
  • Standby power consumption: < 2 W with BT Connection; < 0.5 W without BT Connection
  • USB output: 5 V 2.1 A
  • Speaker drivers: 1 x 5.25 in (133 mm) woofers + 2 x 1.75 in (44 mm) tweeters
  • Signal-to-noise (S/N) ratio: > 80 dBA
  • Frequency response: 50 Hz – 20 kHz
  • Battery charge time: < 3.5 hrs
  • Battery play time: < 6 hrs
  • Bluetooth version: 4.2
  • Bluetooth profile: A2DP v1.3, AVRCP v1.6
  • Bluetooth transmitter frequency range: 2.4 – 2.48 GHz
  • Bluetooth maximum transmitter power: 10 dBm (EIRP)
  • Bluetooth transmitter modulation: GFSK, π/4 DQPSK, 8DPSK
  • Bluetooth range: Approx. 10 m (33 ft)
  •  USB format: FAT 16, FAT 32
  •  USB file format: .mp3, .wma, .wav
  • Digital input: Bluetooth / USB -9 dBFS
  • Input sensitivity:
    • AUX in: 370 mV RMS
    • Microphone: 20 mV RMS
    • Guitar: 100 mV RMS
    • Product Dimension (W x H x D): 490 x 245 x 228 mm / 19.3 x 9.6 x 9.0 in
  • Net weight: 6.5 kg / 14.3 lbs

6 hrs battery playtime is only a reference and may vary depending on music content and battery aging after numerous charging and discharging cycles. It’s achievable with a predefined music source, light show switched off, volume level at 13, and Bluetooth streaming source.

Wireless microphone spec

  • Frequency response: 65 Hz – 15 kHz
  • Signal-to-noise (S/N) ratio: > 60 dBA
  • UHF frequency band: 470 ~ 960 MHz (depends on countries/regions)
  • Transmitter transmitting power: < 10 mW
  • Microphone battery play time: < 10 hrs
  • Distance between transmitter and receiver: < 10 m

Bluetooth

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
Note: The product is in compliance with the European Union energy legislation.

  1. Bluetooth connection mode
    The product is intended to be used for streaming music via a Bluetooth connection. A consumer can stream Bluetooth audio to the speaker. When the product is connected through Bluetooth, the Bluetooth connection must remain active at all times to ensure proper operation. The product will enter sleep mode (networked standby) after 20 minutes without operation. The power consumption in sleep mode is less than 2.0 Watts, after which it can be re-activated via Bluetooth connection.
  2. Bluetooth disconnection mode
    The product will enter standby mode after 20 minutes without operation. The power consumption in standby mode is less than 0.5 Watts.

The maximum operating temperature is 45 °C. No naked flame sources, such as lighted candles, should be placed on the apparatus. This equipment is a Class II or double insulated electrical appliance Wireless microphone users shall rely on the white space databases in part 15 to determine that their intended operating frequencies are available for unlicensed wireless microphone operation at the location where they will be used. Wireless microphone users must register with and check a white space database to determine available channels prior to beginning operation at a given location. A user must re-check the database for available channels if it moves to another location.

Documents / Resources

JBL ON-THE-GO Portable Bluetooth Party Speaker [pdf] User Guide
ON-THE-GO, Portable Bluetooth Party Speaker, Bluetooth Party Speaker, Party Speaker, ON-THE-GO, Speaker

References

Leave a comment

Your email address will not be published. Required fields are marked *