Overview
Refer to the PDF for details.
Specifications
Refer to the PDF for details.
Controls & Indicators
Refer to the PDF for details.
Installation / Setup
Refer to the PDF for details.
Operation
Refer to the PDF for details.
Troubleshooting & Error Codes
Refer to the PDF for details.
Safety & Warnings
Refer to the PDF for details.
Download 81133A.-34A-PROG Manual (PDF – 615.4 KB)
HP 81133A.-34A-PROG manual: assists technicians in troubleshooting and calibrating equipment. File size: 615.4 KB.
- Brand: HP
- Model: 81133A.-34A-PROG
- Type: Manual
- File size: 615.4 KB
Overview
Brief overview of the product.
Specifications
- Key spec 1
- Key spec 2
Controls & Indicators
Control panel/button layout.
Installation / Setup
- Step 1…
- Step 2…
Operation
Basic usage, modes, cycles.
Troubleshooting & Error Codes
| Issue / Code | Fix |
|---|---|
| Example | How to fix… |
Safety & Warnings
- Important warning…
Downloads
Download 81133A.-34A-PROG manual (PDF)
HP 81133A.-34A-PROG Overview
The HP 81133A is a high-precision pulse generator designed for advanced testing and measurement applications. It provides programmable pulse outputs with excellent timing accuracy and stability, making it ideal for use in research laboratories, telecommunications, and electronic device testing. The device supports a wide range of pulse widths and repetition rates, enabling versatile signal generation for various experimental setups.
Main Features and Specifications
- Pulse Width Range: 2 ns to 10 ms
- Repetition Rate: Up to 10 MHz
- Output Amplitude: Adjustable from 0.1 V to 5 V into 50 Ω
- Low Jitter: Less than 50 ps RMS
- Programmable Delay and Pulse Polarity
- Front Panel and Remote Control Interface
- High Output Drive Capability
- Compact and Rugged Design for Laboratory Use
Basic Usage and Operation Tips
To operate the HP 81133A pulse generator, first connect the output to the device under test using a 50 Ω coaxial cable. Power on the unit and use the front panel controls or remote interface to set the desired pulse width, repetition rate, and amplitude. Always start with lower amplitude settings to avoid damaging sensitive equipment. For precise timing applications, allow the device to warm up for a few minutes to stabilize output characteristics. Consult the manual for programming commands if remote control is required.
Troubleshooting and Maintenance
If the output pulses appear distorted or unstable, verify all cable connections and ensure the output impedance matches the load. Check that the device is operating within specified environmental conditions (temperature and humidity). Regularly clean the front panel and connectors with a soft, dry cloth to prevent dust accumulation. If the device fails to power on or exhibits erratic behavior, consult the manual’s troubleshooting section or contact HP support for service options.
Safety Reminder
Always ensure the HP 81133A is connected to a properly grounded power source. Avoid exposure to moisture and extreme temperatures. When connecting or disconnecting cables, power off the device to prevent electrical shock or damage. Follow all safety instructions outlined in the manual to ensure safe and reliable operation.