|Power: 3*2 AA* 1.5V alkaline batteries|
The default range of temperature adjustment：5~35°C
Range of temperature display:：0~70°C
Insulating condition: Normal environment Running program: Set per 1 week as a cycle
Thread size： M30*1.5
|First-time open thermostat, it displays all icons for 3s then program version NO.||blinking. Press to set minutes, hours, weeks. Press, to change value. Press to confirm.||Test One. “ADA” displays. Press. If batteries, gear reducer, and valve is fine, as shown in the picture||Test Two. Finished|
! Adjustment Error（If solved errors restart by pressing ） Er1 Short route: the pin was stuck which is away from terminus 2mm Er5 The temperature sensor is disconnected or damaged Low battery, an icon of battery is blinking After put batteries inside, is on display then mean okay, if flashing, then breakdown.
manual mode auto mode child lock energy-saving mode comfort mode holiday mode Open Widow Detection
|Press to switch auto mode, manual mode, and holiday mode.Long press 3s to access programmable mode|
|Decreasing KeyLong press to close valve 【OFF】|
|Press to set comfort mode or energy-saving mode Long press for 3s, press or to set temperature, stay 5s to save|
|Increasing KeyLong press to open valve 【OP】|
|Confirm KeyPress to open Boost Function and press any key to exit|
The valve of fast heating is fully open within 300s then return to the previous stateLong press to unlock (auto clock thermostat when 10 minutes no operation)
1) Time Setting
Long press for 3s to access Time Setting. Press to switch, then press to confirm. Press, to change minutes, hours, week. Pressto confirm.
2) Holiday Mode
Press to switch into Holiday Mode. Press to confirm. Press,to change temperature and days. Press to confirm
3) Open Window Detection
It is the default that the open window function was closed after being put into batteries , and display – – , And open it on advance setting A2 (once change batteries, should set it again)
When room temperature suddenly drops into temp threshold, valve close for 15 minutes. After finishing, if the room temp is still lower than the temp threshold, it will keep this model.
4) Programmable Mode
P2 5+2 days programmable (Default)
Long press for 3s to access Programmable Mode. Pressto switch into P (5+2 Days, 6+1 Days, 7 Days). Press to confirm. Press,to change value.
P0 Manual Programmable(Default)：
|Period||Default Period||Default temperature|
Long pressfor 3-5 to access Advanced Option. Press to switch into ADVANGED. Press to confirm. Press to change value.
|A2||Open Window Detection||1 open and setting open window temperature: – – mean closed it ,press ,display 5℃,mean open it ,and setting range :5-25℃ 2 Valve closing ime(running time of open window): 0: 05-1: 00 (press one time ,change 5min) , after time is 0,then closed it||1 Temp threshold – – ℃( Default:Close ) 2 0:15 mean valve close time|
|A3||Auto be locked||0：cancel this function|
1：open this function
|A7||Valve Opening||100 mean valve opening100%|
5 mean valve opening 5%
|A9||Factory Default||Display A o, press whole display 88 ,press or to change it to 00|
RISK OF ELECTRICAL SHOCK
Please arrange professional technician to install the product according to drawings and instructions.
Disconnect power supply before making any connection. Contact with components carrying hazardous voltage can cause electrical shock.
Documents / Resources
|Honeywell HY369 TRV Thermostatic Radiator Valve [pdf] User Manual|
HY369, TRV Thermostatic Radiator Valve