IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE SAFETY INSTRUCTIONS BEFORE USING THIS AIR PURIFIER

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

  1. Read all instructions before operating the air purifier.
  2. Place air purifier where it would not be easily overturned by persons in the household.
  3. ALWAYS turn the air purifier controls to the OFF position and unplug from the wall outlet when not in use.
  4. To disconnect the air purifier, make sure the unit is powered OFF then grip the plug and pull it from the wall outlet. NEVER pull by the cord.
  5. DO NOT use any product with a damaged cord or plug, any product that malfunctions, or any product that has been dropped or damaged in any manner. Keep the cord away from heated surfaces.
  6. DO NOT use an air purifier outdoors.
  7. DO NOT use an air purifier unless it is fully assembled.
  8. DO NOT run power cord under carpets, and DO NOT cover with throw rugs. Arrange the cord such that it will not be a tripping hazard.
  9. DO NOT use an air purifier where combustible gases or vapors are present.
  10. DO NOT expose the air purifier to rain, or use near water, in a bathroom, laundry area, or other damp location.
  11. The air purifier MUST be used in its upright position.
  12. DO NOT allow foreign objects to enter ventilation or exhaust opening as this may cause electric shock or damage to the air purifier. DO NOT block air outlets or intakes.
  13. Locate the air purifier near the outlet and DO NOT use it with an extension cord or power strip.
  14. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit only one way in a polarized outlet. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat this safety feature.
  15. A loose fit between the AC outlet (receptacle) and plug may cause overheating and a distortion of the plug. Contact a qualified electrician to replace the loose or worn outlets.
  16. DO NOT sit, stand, or place heavy objects on the air purifier.
  17. ALWAYS disconnect the power supply before servicing.
  18. Keep out of reach of children and pets.
  19. Filters may be harmful if ingested. Avoid breathing dust when changing filters.

SAVE THESE INSTRUCTIONS.

For FCC compliance information, please see the last page of this manual.
WARNING: To Reduce The Risk of Fire or Electric Shock, DO NOT Use This Air Purifier With Any Solid-State Speed Control Device.

GETTING TO KNOW YOUR AIR PURIFIER

Honeywell HPA020 Series Hepa Air Purifier - AIR PURIFIER

HOW YOUR AIR PURIFIER WORKS

This model air purifier incorporates a 2-stage cleaning system to help clean the air that passes through the filter in the unit

Honeywell HPA020 Series Hepa Air Purifier - Stage Cleaning System

(Fig. 1).

Stage 1: Type Honeywell HPA020 Series Hepa Air Purifier - icon Pre-Filter Odor Reducing Pre-Filter
Stage 2: Type Filter Honeywell HPA020 Series Hepa Air Purifier - icon 2Certified HEPA Filter that captures the following microscopic airborne allergens and particles:
dust, pollen, pet dander, dust mite debris and smokes as small as 0.3 microns or larger from the air that passes through the filter.

GETTING STARTED

  • Select a firm, level, and flat location.
  • When operating, large volumes of air are drawn toward the air purifier. Surrounding areas should be cleaned and/or vacuumed frequently to prevent the build-up of dust and other contaminants. This may also help prolong the life of the filter. If the unit is placed on a light-colored carpet, a small mat or rug should be used underneath to prevent staining. This is especially important in homes with contamination from smoking, fireplaces, or where candles are burned.
  • Ensure the front of the unit faces away from the closest wall or furniture.
  • Ensure no grilles are blocked.

INSTALL CERTIFIED HEPA FILTERS AND ODOR REDUCING PRE-FILTER

The Certified HEPA Filter and Odor Reducing Pre-Filter are supplied within your air purifier. New air purifiers have their filters wrapped to ensure purity and are labeled to help identify the proper replacement filter (Type Filter Honeywell HPA020 Series Hepa Air Purifier - icon 2Certified HEPA Filter and Type Honeywell HPA020 Series Hepa Air Purifier - iconPre-Filter Odor Reducing Pre-Filter).

  • Before using your new air purifier you must remove the wrappers covering the filters and pre-filter. Make sure the air purifier is OFF and unplugged.
  • Turn the air purifier upside down on a flat surface. The filter is visible from the bottom of the unit (Fig. 2).
    Honeywell HPA020 Series Hepa Air Purifier - HEPA FILTERS
  • Remove the Certified HEPA Filter by grasping the filter from the finger notches. There are small molded tabs that secure the filter in place and prevent it from slipping out of the unit. Pull away from tabs and up to remove. When removing a used filter that is not wrapped in plastic, pull the red tab to remove.
  • Remove the protective plastic wrap from the HEPA Filter and Pre-Filter.
  • Install the Pre-Filter first by sliding it in behind the front grille of the air purifier and securing it in the molded slots.
  • Install the Certified HEPA Filter by sliding it in the opening on the bottom of the air purifier. Ensure that the red tab is accessible for easy removal.

WARNING: Filters may be harmful if ingested. Avoid breathing dust when changing filters.

OPERATION

Honeywell HPA020 Series Hepa Air Purifier - icon 3This product earned the ENERGY STAR label by meeting strict energy efficiency guidelines set by the U.S. EPA. Room air cleaners have demonstrated the potential for improving air quality and providing health benefits. EPA does not endorse manufacturer claims regarding the degree to which a specific product will produce healthier indoor air.
Honeywell HPA020 Series Hepa Air Purifier - OPERATION
  • Ensure the air purifier is plugged into a working electrical outlet
  • Turn the Power Knob to desired setting (O = Off, III = High, II = Medium, I = Low)

Portable air purifiers are more effective in rooms where all the doors and windows are closed. It is recommended that you run your air purifier while you are at home to help clean the air.

The energy efficiency of this ENERGY STAR certified model is measured based on a ratio between the model’s CADR for Smoke and the electrical energy it consumes, or CADR/Watt.

ELECTRONIC FILTER CHECK REMINDER

Honeywell HPA020 Series Hepa Air Purifier - FILTER CHECK REMINDER

This model has an electronic filter check to remind you when to check and replace your filters based on the air purifier’s hours of use. A red LED will illuminate when it is time to check/replace your filters.
When the HEPA Filter or Pre-Filter needs to be replaced, the light will remain on until it is RESET. You may unplug the air purifier without interrupting the filter check.
You should periodically check the filters depending on operating conditions, the HEPA Filter should be replaced every 12 months and the pre-filter every 3 months.

REPLACE WITH CERTIFIED HEPA FILTER Filter and ODOR REDUCING PRE-FILTER Pre-Filter
To RESET the Electronic Filter Check:

When the filter check light remains on and solid, it is time to replace the Odor Reducing Pre-Filter and reset the filter monitor. With the unit powered ON,  press the FILTER RESET button next to the Check Filter LED and hold for approximately 2 seconds until the light turns off (Fig. 4).
When the LED illuminates and is flashing, it is time to replace the HEPA filter and reset the filter monitor. With the unit powered ON, press the FILTER RESET button and hold for approximately 2 seconds until the light turns OFF (Fig. 4).

Manual (or Early) Reset of Electronic Filter Check
Depending on your individual usage (environment and hours used), you may need to replace the filters more or less frequently. Each time you replace your filters, you should reset the filter monitor. You may manually reset the filter monitor for the Pre-Filter or the HEPA Filter, or both. If you change the Pre-Filter or HEPA Filter before the Check Filter LED is illuminated, it is possible to reset the filter monitor. You must first manually illuminate the Check Filter LED. Follow these steps:

  1. With the unit powered ON, press the FILTER RESET button for 5 seconds to illuminate the LED in “solid” mode.
  2. To reset filter monitor for Pre-Filter: press and hold FILTER RESET button for 2 seconds until LED changes to flashing mode.
  3. TAP FILTER RESET button to shut LED off. The pre-filter monitor is now set to “clean status”.
  4. To reset filter monitor for HEPA Filter: LED must be in “flashing mode”. Follow Step 1 above, then TAP FILTER RESET button again to illuminate the LED in “flashing mode”.
  5. Press and hold FILTER RESET button for 2 seconds until LED shuts off. The HEPA Filter monitor is now set to “clean status”.
  6. To reset filter monitor for both Pre-Filter and HEPA Filter: Follow Steps 1, 2, and 5 above.

CLEANING AND STORAGE

We recommend that you clean the air purifier at least once every 3 months and before extended storage. Use an only dry cloth to wipe the external surfaces of the air purifier.
DO NOT USE WATER, WAX, POLISH, OR ANY CHEMICAL SOLUTION.

If your Air Purifier will not be used for more than 30 days, we recommend that you:

  • Remove the HEPA Filter and the Odor Reducing Pre-Filter from the unit.
  • Place each filter in separate airtight plastic bags to preserve freshness.
  • Avoid breathing dust when changing filters.

ACCESSORIES AND REPLACEMENT FILTER

You may purchase Honeywell Replacement Certified HEPA Filter Filter Honeywell HPA020 Series Hepa Air Purifier - icon 2and Honeywell Odor Reducing Pre-Filter Honeywell HPA020 Series Hepa Air Purifier - iconPre-Filter at the store where you purchased your air purifier or, order directly from www.HoneywellPluggedIn.com. Use only Genuine Honeywell Replacement Filters. You have the option to use the Honeywell Household Gas & Odor Reducing Pre-Filter Pre-Filter Honeywell HPA020 Series Hepa Air Purifier - icon+ instead of the Odor Reducing A Pre-Filter Pre-Filter. It is also available at many etailers and on www.HoneywellPluggedIn.com. 

If you have any questions, please call 1-800-477-0457, or visit our website at: www.HoneywellPluggedIn.com/contact-us.

FREQUENTLY ASKED QUESTIONS

My Air Purifier is starting to make noise and the air output is less. What’s wrong?
The filters may be dirty. High amounts of particles can block the pores in the filter and stop the air from moving through it. Replace the filters.
How long should I run my Air Purifier?
The unit will be most effective when doors and windows are closed. It is recommended that you run your air purifier while you are at home to help clean the air. If desired or conditions warrant, you may run your air purifier 24 hours a day.
Can I wash any of the filters in my Air Purifier?
No. Washing any of the filters will ruin them.
When should I replace my filters?
You should periodically check the filters depending on operating conditions, the HEPA Filter should be replaced every 12 months and the pre-filter every 3 months.

CONSUMER RELATIONS

We are here to help. Call us toll-free at: 1-800-477-0457
Or visit our website at: www.HoneywellPluggedIn.com/contact-us
Please be sure to specify the model number.

NOTE: IF YOU EXPERIENCE A PROBLEM, PLEASE CONTACT CONSUMER RELATIONS FIRST OR SEE YOUR WARRANTY. DO NOT RETURN TO THE ORIGINAL PLACE OF PURCHASE. DO NOT ATTEMPT TO OPEN THE MOTOR HOUSING YOURSELF, DOING SO MAY VOID YOUR WARRANTY AND CAUSE DAMAGE TO THE AIR PURIFIER OR PERSONAL INJURY.

5 YEAR LIMITED WARRANTY

You should first read all instructions before attempting to use this product.

A. This 5-year limited warranty applies to repair or replacement of products found to be defective in material or workmanship. This warranty does not apply to damage resulting from commercial, abusive, unreasonable use, or supplemental damage. Defects that are the result of normal wear and tear will not be considered manufacturing defects under this warranty. KAZ IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY  NATURE, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS  LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you also may have other rights which vary from jurisdiction to jurisdiction. This warranty applies only to the original purchaser of this product from the original date of purchase.
B. At its option, Kaz will repair or replace this product if it is found to be defective in material or workmanship.
C. This warranty does not cover damage resulting from any unauthorized attempts to repair or from any use not in accordance with the instruction manual.
D. This warranty does not cover the HEPA Filters or Pre-Filters except for material or workmanship defects.

Please go to www.HoneywellPluggedIn.com/warrantyregistration to register your product and receive product information updates and new promotional
offers.

FCC COMPLIANCE / CUMPLIMIENTO DE LA FCC

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio TV technician for help.
Honeywell HPA020 Series Hepa Air Purifier - icon 4

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

© 2021 All rights reserved.
Kaz USA, Inc., a Helen of Troy Company
400 Donald Lynch Blvd., Suite 300, Marlborough, MA 01752
Honeywell is a trademark of Honeywell International Inc., used under license by Helen of Troy Limited.
Distributed in Canada by: Kaz Canada, Inc., a Helen of Troy Company
6700 Century Avenue, Suite 210, Mississauga, Ontario L5N 6A46
Contact us at 1-800-477-0457 or www.HoneywellPluggedIn.com/contact-us
The ENERGY STAR® name and mark are registered trademarks owned by the U.S. EPA.
Made in China
For Responsible recycling, please visit
RECYCLE  NATION
www.RecycleNation.conn 

Honeywell HPA020 Series Hepa Air Purifier - icon 6

Brand: Honeywell
Category: Air Purifiers

Model: HPA020 Series
Artwork Part #: A007022R0
Die Line Part #: NA

Subject: Owner’s Manual
Region: US
Flat Size: IN: W11x H8
Folded Size: IN: W5.5 x H8
Scale: 1/1
Material: 70# Matte Text
Page Count: 16
Revision: 3
Date: 16AUG21
Release Date: 19AUG21
Re-release Date:

Colors:
Dielines (Do not print)
Spot Colors

Honeywell HPA020 Series Hepa Air Purifier - Colors

Special Instructions:

Quality Requirement of Artwork and Quality Clarification Process of Artwork Printing: Meet Eng-QS-06&02

Helen of Troy
Creative Services
Marlborough, MA 01752, USA
+1 508 490 7000

Documents / Resources

Honeywell HPA020 Series Hepa Air Purifier [pdf] Owner’s Manual
HPA020 Series Hepa Air Purifier, HPA020, Series Hepa Air Purifier

References

Leave a comment

Your email address will not be published.