OverviewHoneywell BW Flex Series Portable Multiple Gas Detector - Mobile Device3

Honeywell BW Flex Series Portable Multiple Gas Detector - Mobile Device4

1 LED Alarm
2 IntelliFlash
3 Display
4 Button,
5 Beeper

Honeywell BW Flex Series Portable Multiple Gas Detector - Common device’s operations

6 .Sensor,
7. Clip
8. Battery
9 . Charging Port
Common device’s operations

Power On4-second hold
Power Off4-second hold
Enter MenuDouble-press
Exit Menu3-second Hold
Select NextSingle-press
Initiate Selected3-second Hold
Acknowledge latched alarm1-second hold
Honeywell BW Flex Series Portable Multiple Gas Detector - Mobile Device
Honeywell BW Flex Series Portable Multiple Gas Detector - Mobile Device1

Bump Test and Calibration via a Mobile Device
Turn On the BW Flex. Place the cap over the detector, and then press down on both tabs to snap it into place.

3. On your mobile device, open the Device Configurator appHoneywell BW Flex Series Portable Multiple Gas Detector - icon

Honeywell BW Flex Series Portable Multiple Gas Detector - fig

4. In the Device List screen, select the BW Flex Serial Number to start pairing. The upper LED will light green after pairing succeed.
5. On your Mobile device:
• Tap on the Menu button
• Select Remote Calibration Honeywell BW Flex Series Portable Multiple Gas Detector - icon1
• Follow on-screen instructions.
6 . The process is complete when the results are displayed on your mobile device. You can now remove the cap by pulling on the tabs.

IMPORTANT: Read the User Manual for complete information on the BW Flex operation.

Safety Certifications

IECEx: IECEx SIR 20.0020X
With IR sensor installed: Ex ia op is I Ma Ex ia op is IIC T4 Ga, -40°C≤ Tamb ≤ 60°C
With LEL sensor installed: Ex da ia I Ma Ex da ia IIC T4 Ga, -40°C≤ Tamb ≤ 60°C
With IR and LEL sensor installed: Ex da ia op is I Ma Ex da ia op is IIC T4 Ga, -40°C≤ Tamb ≤ 60°C
Without IR and LEL sensor installed: Ex is I Ma Ex is IIC T4 Ga, -40°C≤ Tamb ≤ 60°C
ATEX: Sira 20ATEX2012X
With IR sensor installed: I M1 Ex is op is I Ma, -40°C≤ Tamb ≤ 60°C
II 1G Ex ia op is IIC T4 Ga, -40°C≤ Tamb ≤ 60°C
With LEL sensor installed: I M1 Ex da is I Ma, -40°C≤ Tamb ≤ 60°C
II 1G Ex da ia IIC T4 Ga, -40°C≤ Tamb ≤ 60°C
With IR and LEL sensor installed: I M1 Ex da is op is I Ma, -40°C≤ Tamb ≤ 60°C
II 1G Ex da ia op is IIC T4 Ga, -40°C≤ Tamb ≤ 60°C
Without IR and LEL sensor installed: I M1 Ex is I Ma, -40°C≤ Tamb ≤ 60°C
II 1G Ex ia IIC T4 Ga, -40°C≤ Tamb ≤ 60°C
RED: RED Directive 2014/53/EU
EMC: Directive 2014/30/EU
ROHS Directive (EU) 2015/863 amending 2011/65/EU
IP: IP66, IP68 (1.2 meters for 45 minutes)

Contact Us
Europe, Middle East, Africa
Life Safety Distribution GmbH
Toll-Free 00800 333 222 44
Middle East +971 4 450 5800
Middle East +971 4 450 5852
(Portable Gas Detection)
gasdetection@honeywell.com
Americas
Honeywell Analytics
Distribution Inc.
Tel: +1 847 955 8200
Toll free: +1 800 538 0363
detectgas@honeywell.com
www.honeywellanalytics.com
Asia Pacific
Honeywell Analytics Asia Pacific
Tel: +82 (0) 2 6909 0300
India Tel: +91 124 4752700
analytics.ap@honeywell.com
Technical Services
EMEA: HAexpert@honeywell.com
US: ha.us.service@honeywell.com
AP: ha.ap.service@honeywell.com

Honeywell BW Flex Series Portable Multiple Gas Detector - qr code

https://safety.honeywell.com/en-us/products/by-category/gas-flame-detection

Documents / Resources

Honeywell BW Flex Series Portable Multiple Gas Detector [pdf] User Guide
BW Flex Series, Portable Multiple Gas Detector

Leave a comment

Your email address will not be published.