The Drake MPM860AG manual provides detailed instructions for setting up and operating the mini processing module, including selecting channels and adjusting gain levels for optimal output. It also includes troubleshooting guidance for addressing issues such as invalid channel settings and outlines warranty information for service and repairs.
Manual Overview
The Drake MPM860AG Mini Processor Module is a versatile component of the R.L. Drake 19″ Mini-Rack Series, designed for efficient rack space utilization. It accepts RF input from channel 3 or 4 NTSC modulators and outputs a vestigial sideband signal suitable for 6 MHz channel environments. The module features a heterodyne conversion system with SAW filtering for optimal channel selectivity. Troubleshooting involves checking the POWER/ERROR indicator; a flashing light signals an invalid channel setting or operational error, disabling the RF output. The front panel includes a channel select switch for CATV or broadcast TV channels and a mode switch for channel type. Internal jumpers allow configuration for STD, HRC, or IRC CATV plans. Calibration involves adjusting the front panel gain control to achieve a +45 dBmV output level from a nominal +10 dBmV ± 3 dB input. The module’s performance is linear, with output levels tracking input changes. For board-level guidance, ensure correct jumper settings and verify all rear panel connections, including the DC input and RF output.
Quick Issues Covered
- Diagnoses invalid channel settings via flashing error indicator.
- Adjusts gain to maintain +45 dBmV output level.
- Troubleshoots power-up failures with rear panel DC input check.
Overview
The MPM860AG is a mini processor module designed by R.L. Drake Company as part of their 19″ Mini-Rack Series, which is a modular headend system optimized for rack space. It supports up to 12 modular units, including fixed or agile modulators and compatible audio/video products, alongside a single power supply in the RMM12 rack mount. The MPM860AG is a miniature analog double conversion heterodyne channel processor, accepting RF input from a typical consumer CH3/4 NTSC modulator. It features frequency agility with front panel pushwheel switch selection for CATV channels 2 through 135 or VHF/UHF TV channels 2 through 69, and includes internal jumpers for HRC or IRC CATV plans. The module ensures optimum vestigial selectivity for adjacent channel headends through its heterodyne conversion system and SAW filter. It is designed to output a vestigial sideband signal for use in a 6 MHz wide channel environment.
Specifications
“”
Controls & Indicators
The MPM860AG front panel includes the following controls and indicators:
F1 – POWER/ERROR Indicator: Lights when connected to the required DC power source. Flashes to indicate an invalid channel setting or other error conditions, causing the RF output to switch off.
F2 – Channel Select Switch: Sets the operating channel for standard CATV channels 02 through 135 or Broadcast TV channels 02 through 69.
F3 – Mode Switch: Sets the type of channel to CATV or Broadcast TV and sets the leading “1” for CATV channels 100 through 135.
F4 – Gain: A screwdriver adjustment that allows the gain of the MPM860AG to be adjusted over a minimum of 10 dB range to set the output level to +45 dBmV.
Installation / Setup
The source does not provide specific information on installation or setup highlights, including wiring, clearances, calibration, or prerequisites.
Operation
The MPM860AG is a mini processing module designed for use in a modular headend system. It allows for the selection of standard CATV channels 2 through 135 or VHF/UHF TV channels 2 through 69 using front panel pushwheel switches. The module supports aeronautical channel offsets per FCC requirements and can be configured for HRC or IRC CATV plans using internal jumpers. It is designed to accept a channel 3 or channel 4 RF input from a typical consumer CH3/4 NTSC modulator and can handle both double sideband and vestigial sideband modulated signals. The module includes a SAW filter to ensure vestigial sideband output suitable for a 6 MHz wide channel environment, allowing for adjacent channel outputs.
The front panel includes a power/error indicator, channel select switch, mode switch, and gain adjustment. The power/error indicator lights up when connected to a DC power source and flashes for invalid channel settings or other errors, disabling the RF output. The channel select switch sets the operating channel, while the mode switch selects between CATV and Broadcast TV channels. The gain control allows for adjusting the output level to +45 dBmV, with the module maintaining linearity to follow input level changes.
Rear panel connections include inputs for channel 3 or channel 4, a DC input connector, and an RF output. The DC input connector requires an appropriate mating DC power cable, and the RF output provides a +45 dBmV signal. The module is designed for use in a rack mount system, with power supplied by a compatible Drake power supply.
Troubleshooting & Error Codes
“”
Safety & Warnings
Refer to the PDF for details.
Download MANUAL Manual (PDF – 155.8 KB)
Drake-mpm860ag MANUAL: Aids technicians in troubleshooting and calibrating the Drake-mpm860ag model. File size: 155.8 KB.
- Brand: Drake-mpm860ag
- Model: MANUAL
- Type: Manual
- File size: 155.8 KB
Overview
Brief overview of the product.
Specifications
- Key spec 1
- Key spec 2
Controls & Indicators
Control panel/button layout.
Installation / Setup
- Step 1…
- Step 2…
Operation
Basic usage, modes, cycles.
Troubleshooting & Error Codes
| Issue / Code | Fix |
|---|---|
| Example | How to fix… |
Safety & Warnings
- Important warning…
Downloads
Drake-mpm860ag MANUAL Overview
The Drake-mpm860ag is a high-performance technical device designed for precision measurement and monitoring in industrial and laboratory environments. This model offers reliable operation with advanced features tailored to enhance accuracy and ease of use. Ideal for professionals requiring consistent and detailed data acquisition, the Drake-mpm860ag ensures efficient performance in demanding applications.
Main Features and Specifications
- High-precision measurement capability with accuracy up to ±0.01%
- Wide measurement range suitable for various industrial parameters
- Robust construction for durability in harsh environments
- Intuitive digital display with backlight for clear readings
- Multiple input/output options for flexible connectivity
- Low power consumption with energy-saving mode
- Compact design for easy installation and portability
Basic Usage and Operation Tips
Before operating the Drake-mpm860ag, ensure it is properly connected to the power source and any required sensors or input devices. Use the control panel to navigate through measurement modes and settings. Calibrate the device regularly according to the manual instructions to maintain accuracy. For best results, operate the device within the recommended environmental conditions and avoid exposure to extreme temperatures or moisture.
Troubleshooting and Maintenance
If the device displays erratic readings or fails to power on, check all connections and verify the power supply. Refer to the error codes section in the manual for specific diagnostic information. Regularly clean the device’s exterior with a soft, dry cloth and avoid using harsh chemicals. Schedule periodic calibration and inspections to ensure optimal performance and longevity.
Safety Reminder
Always follow safety guidelines when handling and operating the Drake-mpm860ag. Disconnect the device from power before performing any maintenance. Avoid contact with live electrical components and use protective equipment as necessary. Proper use and adherence to the manual’s instructions will help prevent accidents and ensure safe operation.